Professional Documents
Culture Documents
Validation Plan
Validation Plan
Sr.
Number Requirments A I D
Electrical motor
ü
1
Electrical controller (the brains of the cleaner)
ü
2
Low volume pump for spraying the cleaning
solution ü
3
Nozzles for applying the solution to the board
4
Hose that transports solution from the pump to
the nozzles ü
5
6 A plastic reservoir for the cleaning solution
7 Rails ü
8 Rod ü
9 Rods ü
10 Aluminum support ü
11 Plastic housing for electrical components ü
Chargeable batteries/charger
ü
12
13 Charging station ü
Stoppers to be placed at the end of the rails
ü
14
15 Rail sensor
16 Felt strip for cleaning ü
17 Installation screws ü
Assembly screws
ü
18
19 Sensor
20 Springs ü ü
A-Analysis is the verification of a product or system using models, calculations and testing equipment.
I - Inspection is the nondestructive examination of a product or system using one or more of the five senses (vis
D-Demonstration is the manipulation of the product or system as it is intended to be used to verify that the res
T-Test is the verification of a product or system using a controlled and predefined series of inputs, data, or stim
ort
T comment
ting equipment.
ore of the five senses (visual, auditory, olfactory, tactile, taste). It may include simple physical manipulation and measurements.
sed to verify that the results are as planned or expected.
s of inputs, data, or stimuli to ensure that the product or system will produce a very specific and predefined output as specified by the
on and measurements.
Brushless DC Motor
2
pressed the signal is passed to Bluetooth controller and this signal is passed to
motor A via (Arduino -UNO)
5
The duster move forward insert pressure till mid position and returns to original
position
7
duster stocks between the working, extra 4 buttons are provided for forward
motion and backward motion of upper duster and lower duster.
8
A light sensor which would trigger the robot to erase the entire whiteboard when
the lights go off i.e. when the teacher leaves the class room for the night
9
Only erasing certain color writing. Since the program uses a RGB filter, the robot
could theoretically erase only red, green, blue, yellow, or cyan colored writing
10