Professional Documents
Culture Documents
Otating Ontrol Evices: T M S A
Otating Ontrol Evices: T M S A
“Under Pressure … In Control” THE MECHANICAL SEAL ADVANTAGE: Geothermal drilling requires
Stretch interference fit around the an RCD designed to operate
Smith Services has Rotating Con- drill stem components seals 100 at high temperature. High-
trol Devices (RCD), also knows as percent of the time temperature stripper elements
rotating heads, for most applications. Stripper elements are easily are also necessary
An RCD seals around the drillstring replaced at the rig Drilling risks from problems such
components, diverting dust, mud, Maintainable by the rig crew as lost circulation, fresh water
air / gas, mist, foam or steam away Seal is not lost in the event of any flows or unexpected events from
from the rig floor. From conventional type of hydraulic or electrical wildcat exploration wells can be
air, gas and geothermal drilling to power disruption mitigated with the use of an RCD
SURFACE AND RIG EQUIPMENT
today’s complex Underbalanced Seal is enhanced in the presence to control potential influx
Drilling (UBD) and managed pres- of wellbore pressure
sure projects, Smith Services has Note: These products, regardless of
an RCD designed for the job. Smith APPLICATIONS: pressure ratings, are diverters and
products are backed by experienced Rig site safety is the main reason not blowout preventers.
operations and service personnel for utilizing an RCD. This piece
ensuring that the application, instal- of equipment enables drilling Note: The published test pressure
operations to continue while ratings contained herein pertain
lation and demobilization are done to the bearing section lower seal
right. Smith Services is committed isolating the drilling person- assemblies only and do not apply
to improving work site safety for all nel from potentially harmful to any of the stripper elements.
drilling personnel. wellbore fluids and gasses Further to this, Smith Services,
Conventional air, mist, foam and a Business Unit of Smith Interna-
The main components of the gas drilling requires an RCD for tional, Inc., does not guarantee,
Smith Services RCD are the lower the isolation and redirection of either expressed or implied, the
bowl with inlet and outlet flanges, the wellbore discharge pressure ratings published in this
the bearing assembly, bearing seals, Protects the environment by or any other printed materials.
the stripper element, the drive directing potentially harmful
bushing assembly and the kelly wellbore fluids and gasses through
bushing. Each component is made the processing equipment on
to exacting standards to ensure location, before being returned to
reliable performance. the atmosphere
Underbalanced and managed
The stripper element is a critical pressure operations require the
component of the Smith Services use of an RCD to safely direct
RCD. This is the active barrier the wellbore flow through the
between the fluids in the well- necessary processing equipment
bore and the rig floor personnel. A as drilling operations progress.
mechanical seal is created by the An RCD is required in all types
stretch interference fit between the of UBD, however, a good deal of
kelly / drill pipe and the ID of the planning must be done to ensure
stripper element and is active 100 the right equipment and the
percent of the time. Seal reliability appropriate stripper elements are
and stripper element life are maxi- selected
mized through the strict material
quality and manufacturing process
controls used to build each Smith
Services stripper element. HOLD 2500 RCD
10
DRILCO GROUP HE GROUP RED BARON GROUP
The new HOLD 2500 Rotating REMOTE HYDRAULIC OPERATION FEATURES AND BENEFITS:
Control Device (RCD) has been The HOLD 2500 RCD enables the Complete hydraulic lock-
designed with rig safety and opera- complete replacement of the strip- down and release of the
tional reliability in mind. The new per element without going below the stripper element
Hydraulically Operated Lock-Down rig floor to unbolt any primary or Control panel is conveniently
system eliminates the need to send secondary locking bolts to unlock the located on the rig floor
personnel below the drilling floor to clamp. The HOLD 2500 RCD offers an Fail-safe locked mechanism
release primary or secondary locking entirely new clamping system that is requires hydraulic pressure
systems when replacing the strip- hydraulically actuated for both lock- to open
per element. These elements can be ing and unlocking. The driller operates Safety Interlock System prevents
The RDH 2500 Rotating Control The mechanically energized strip- Drive
Device (RCD) offers built-in safety per element provides an uninter- Clamp bushing
features that make this head an rupted wellbore seal bolts
excellent choice for underbalanced Large heavy-duty tapered roller Top
and managed pressure drilling proj- bearings provide low-torque rota- clamp
ects. The stripper element can be tion and load support
easily changed independent of the Continuous circulation of hydrau-
bearing assembly, saving rig time lic oil lubricates and cools the
and eliminating the need for excess bearings and seals Bearing
inventory on location. This product Independent high-pressure assembly
SURFACE AND RIG EQUIPMENT
TECHNICAL DATA
Inlet Flange Spool ID Outlet Flange
7¹⁄₁₆" - 5000# 7¹⁄₁₆" 7¹⁄₁₆" - 2000/3000/5000#
7¹⁄₁₆" - 5000# Shorty 7¹⁄₁₆" 7¹⁄₁₆" - 2000/3000/5000#
9" - 3000# 9" 7¹⁄₁₆" - 2000/3000/5000#
11" - 3000 / 5000# 11¹⁄₄" 7¹⁄₁₆" - 2000/3000/5000#
11" - 3000# Shorty 11¹⁄₄" 7¹⁄₁₆" - 2000/3000/5000#
13⁵⁄₈" - 5000# 13⁵⁄₈" 7¹⁄₁₆" - 2000/3000/5000#
The DHS 1400 Rotating Control FEATURES AND BENEFITS: Elastomers are available for oil,
Device (RCD) is the Smith Services The mechanically energized strip- gas, high-temperature and water-
intermediate-pressure rated drilling per element provides an uninter- based drilling fluids
head. Its compact design and large rupted wellbore seal Dual element adaptor increases
14 inch thru-bore make it the ideal Large heavy-duty tapered roller drilling personnel safety
choice when substructure height is bearings provide low-torque rota- Sealed bearing assembly retriev-
limited. The stripper element can be tion and load support able through 22½ inch rotary table
easily changed independent of the Wear bushing for wellhead
bearing assembly, saving rig time adapter is available for use prior
and eliminating the need for excess to installation of drilling head
SURFACE AND RIG EQUIPMENT
TECHNICAL DATA
Inlet Flange Spool ID Outlet Flange
7¹⁄₁₆" - 3000# 7¹⁄₁₆" 7¹⁄₁₆" - 2000/3000# Inlet
flange
7¹⁄₁₆" - 3000# Shorty 7¹⁄₁₆" 7¹⁄₁₆" - 2000/3000#
9" - 2000 / 3000# 9" 7¹⁄₁₆" - 2000/3000#
11" - 3000 / 5000# 11¹⁄₄" 7¹⁄₁₆" - 2000/3000#
11" - 3000 / 5000# Shorty 11¹⁄₄" 7¹⁄₁₆" - 2000/3000#
13⁵⁄₈" - 5000# 13⁵⁄₈" 7¹⁄₁₆" - 2000/3000#
13⁵⁄₈" - 5000# Shorty 13⁵⁄₈" 7¹⁄₁₆" - 2000/3000#
14
DRILCO GROUP HE GROUP RED BARON GROUP
The RDH 500 Rotating Control Heavy-duty roller bearings pro- Stripper
Device (RCD) allows increased versa- vide low-torque rotation and sup- element
tility and ease of use in underbalanced port the loads applied by wellbore
drilling and managed pressure drilling pressure and / or the drillstring
operations. The one-piece drive bush- Bearing assembly is field replace-
ing / stripper element can be changed able through 17½ inch rotary table
independently of the bearing assem- Elastomers available for all types
bly, saving rig time and eliminating of drilling media Upper
cap screws. The RDH 500 is operating Sealed bearing chamber isolates clamp
test pressure rated to 500 psi, and bearing area from contamination
Inlet
TECHNICAL DATA Outlet flange flange
Inlet Flange Spool ID Outlet Flange Height is not shown
15
DRILCO GROUP HE GROUP RED BARON GROUP
The Model 7068 Rotating Control FEATURES AND BENEFITS: Available in “Shorty” (only 24⅜
Device (RCD) is the low-pressure The mechanically energized strip- inches high) version
workhorse of the Smith Services per element provides an uninter- Elastomers are available for oil,
rotating head fleet. It has established rupted wellbore seal gas, high-temperature and water-
a reputation for dependability and Large heavy-duty tapered roller based drilling fluids
ease of operation. The compact bearings provide low-torque rota- Dual element adaptor increases
design of this head (the “Shorty” tion and load support drilling personnel safety
is less than 25 inches tall) makes it The shock cushion in the retriev-
ideal for use on small drilling rigs able drive bushing absorbs lat-
where substructure height is limited. eral drillstring impact, ensuring
SURFACE AND RIG EQUIPMENT
SPECIFICATIONS Clamp
Drive
bolt
Rotating test pressure 250 psi* bushing
Static test pressure 750 psi*
Max. rpm 150 rpm Clamp
Height 24³⁄₈" - 38"
Max. width 32¹⁄₂" Outlet
Rotating stripper element Single or dual flange
Stripper element mounting One-piece or bolt on
Rotary drive Yes
Top drive Yes
Dual stripper element adaptor Add 18" - 22"
H2S capable Available on request
Max. pass through bearing assembly 13³⁄₄"
16
DRILCO GROUP HE GROUP RED BARON GROUP
The Model 8068 Rotating Control FEATURES AND BENEFITS: Drive Clamp
Device (RCD) is designed for use on The mechanically energized strip- ring
large diameter wells. This product fea- per element provides an uninter-
tures a split body design with the bear- rupted wellbore seal
ing assembly attached to the mounting Large heavy-duty tapered roller
spool via clamping dogs. The mount- bearings provide low-torque rota-
ing spool is available for 13⅝ inch to tion and load support
20 inch BOP bolt-on spools and 30 The shock cushion in the retriev-
inch and 36 inch weld-on mount- able drive bushing absorbs lat-
ing flanges for conductor pipe. eral drillstring impact, ensuring
17
DRILCO GROUP HE GROUP RED BARON GROUP
The Model 7368 Rotating Con- Large heavy-duty tapered roller One-piece
trol Device (RCD) is designed for bearings provide low-torque rota- combination drive
use where space is limited, such as tion and load support bushing stripper
on workover rigs. The Model 7368 One-piece combination drive element
head employs the same design fea- bushing stripper element passes Clamp
Clamp
tures as the larger Model 7068 low- through a 10½ inch rotary table bolt
pressure RCD. Elastomers are available for oil,
gas, high-temperature and water-
FEATURES AND BENEFITS: based drilling fluids
The mechanically energized
SURFACE AND RIG EQUIPMENT
TECHNICAL DATA
Inlet Flange Spool ID Outlet Flange
7¹⁄₁₆" - 2000 / 3000 / 5000# 7¹⁄₁₆" 4¹⁄₁₆" - 2000 / 3000#
7¹⁄₁₆" - 2000 / 3000 / 5000# 7¹⁄₁₆" 7¹⁄₁₆" - 2000#
Notes:
Kelly bushings are available in 3" square and 3½" hex
Stripper elements are available for 2⅜", 2⅞" and 3½" drill pipe
Ordering instructions, please specify:
Inlet flange size
Outlet flange size
Kelly size and shape
Drill pipe size
Drilling fluid type
Expected circulating temperature
18
DRILCO GROUP HE GROUP RED BARON GROUP
19
DRILCO GROUP HE GROUP RED BARON GROUP
load weight, temperature, cavity Stripper Element Dual element adaptor (all models
pressure and cure time. Once Combination drive bushing and except the Model 7368 RCD)
molded, documentation for the stripper element Stabbing mandrels
entire batch of stripper elements is Reduces replacement time and Snubbing adaptor
reviewed by an independent rubber eliminates cap screws Logging adaptor
lab, completing the QA process. Available in natural rubber,
Smith Services builds quality nitrile, butyl or polyurethane
and reliability into each strip-
per element so that when you are
“under pressure” you are
“in control.”
Heavy-duty
stripper element
20