Professional Documents
Culture Documents
Hvac Questions
Hvac Questions
Hvac Questions
------------------------------------------------------------------------------
hvacc اسئلة مقابالت
1- Are you capable of making the calculations of A/C system and which program
do use?
2- Identify the dew point.
3- Identify the relative humidity.
4- Identify the dry temperature degree.
5- Identify the wet temperature degree.
6- Identify the humidity ratio.
7- Identify Enthalpy.
8- Sketch a simple condensing with specific enthalpy and pressure?
9- Which of the following A/C systems is suitable for the down mentioned
buildings (Package unit - Chilled water - VRV) — (hospital surgery department -
hotel building - main control room - Kitchen)?
10- Compare between the package unit system and the chilled water system and
mention the buildings in which we can use both of them and why?
11- Identify the VRV system and mention the advantages and disadvantages of
it.
12- Mention the types of the compressors used in the A/C systems. And in which
system we can use each one of them.
13- Mention the required points that should be ready for the choice of the A/C
unit.
14- If we got the following results from the loadi ng calculations (total load = 3.0
ton Sensible load = 2.50 ton - CFM discharge = 1200 CFM), Which of the
following unit should be used ?:
Unit (1) - Total load = 2.5 ton - Sensible load = 2.5 ton - 1300 CFM
Unit (2) - Total load = 3.5 ton - Sensible load = * ton - 1100 CFM
Unit (3) - Total load = 3 ton - Sensible load = 2 ton - 1400 CF
15- Which of the following Ducts is more efficient and why? And what are its
disadvantages? 1- 50x50 2- 20x125 3-70x35
16- Which of the following buildings need a larger A/C unit? (western side room
with a pre-cast outer finishing) - (Southern side room with a hollow blocks
finishing) - (Northern side room with a glass outer finishing)?
17- Mention the types of insulation for the pipes and what are the requirements
to demand the insulation process?
18- What are the required points to be ready for preparing the A/C grills ?
19- What are the required conditions distributing the feed fans and the exhaust
fans on the deck?
20- Why should we use primary pump and secondary pump in the chilled water
system?
21- When should we install the expansion tank in the cold water circle?
22- What is the usage of the expansion tank in the cold water circle and the
water feeding circle?
23- What are the ways of reducing the vibration caused by the chillers on deck?
24- What are the required dimensions when installing the following ?
1- Interior A/C wall unit
2- Exterior A/C unit
3- Chiller on deck
4- Flow meter
5- Flow meter
حساب االحمال الحرارية ......وكمان اعمال الشوب درونج ...وكمان القدره علي فهم المخظات المعماريه ...وكيفة
عمل سيلكشن النواع المكائن المستخدم ..مخفي ..باكدج ..تشيلر ...وخد بااك كويس بردو من بعض الءرامج زي
الهاب ..والكاد
=========================
حساب frictionبطريقة equal friction or equal velocityو عمل sizinggلمواسير التشيلرات وادخال
قيمة التهوية في التصميم اذاي
=========================
االسئله المهمه ف انترفو مهندس ميكانيكا ..
#hvac
#firefighting
بداية االنترفيو هيقولك احكي عن مشروع فاير او تعرف عن انظمة الفاير
لو تكييف حيسالك نفس السوال عن مشروع سابق او أنظمة علشان في نص الكالم يسالك عن
الفاير
مضخات الحريق عددها نوع فائدتها والمجالس اللي بيتكون مع المضخات قبل وبعد
رشاشات الحريق أنواع كباءن الحريق أنواع واشهر سوال عن الزون كنترول فألف
بالنسبة للتكييف
أنواع التكييف يعني شيلد او دي اكس
ممكن يسالك في الشيلرات وايه هو الهوك اب بتاع الشيلر وانواع المضخات وأنظمة السرعات للمضخات ثابتة او
متغيرة وكمان هو اب االير هاند والفان كويل والصاج واختبارات الصاج وهكذا دي أشهر األسئلة