Professional Documents
Culture Documents
Ari-Myvalve: Quick Guide
Ari-Myvalve: Quick Guide
ARI-MyValve
Quick guide
ARI-myValve
ARI-myValve is a program that helps you calculate your system components quickly, safely and
reliably.
For each selected product, it also generates the product data as well as various documents
(e.g. ordering data, spare part drawings, data sheets or operating instructions).
After the installation the program can be used with the CAD-Library which is integrated in the
program.
If a PDF-output is generated (refer to item 3.5) and the calculation data are saved (refer to item
3.6), they will be deposited to the project data.
In the result data list, you can see the projects which are already stored with associated
calculations. when there are several projects, you can search by using a filter.
If a project was selected from the list, you can load the saved calculation data, the PDF-output
and the sparepart drawings by using the corresponding button (if they were stored).
With the button "Delete record" the selected project can be deleted.
With the button "Delete calculation" the selected calculation can be deleted.
Attention: The deleting can not be undone! The project will only be cleared when all the
calculation data were deleted.
(Notes to save your data, refer to item 6.0 Saving your data)
7.3 Update
- Please start the download of the ZIP-file first:
(example based on vers. 1.02)
ARI-myValve-Update-1.02.
- Exit ARI-myValve.
- Unzip the ZIP-file und and start the EXE-file:
<update_ARImyValve_1.02.exe>
- Confirm the required information, ARI-
myValve is updated on your computer.
- Restart ARI-myValve again.