Professional Documents
Culture Documents
6A05 Thru 6A10: General Purpose Silicon Rectifier
6A05 Thru 6A10: General Purpose Silicon Rectifier
FEATURES
Low cost construction.
Low forward voltage drop
Low reverse leakage
High forward surge current capability.
High temperature soldering guaranteed:
260/10 seconds, 0.375" (9.5mm)lead length
at 5 lbs (2.3kg) tension.
MECHANICAL DATA
Case: transfer molded plastic
Epoxy: UL94V - 0 rate flame retardant.
Polarity: Color band denotes cathode end.
Lead: Plated axial lead, solderable per MIL - STD - 202E
method 208C
Mounting position: Any
Weight: 0.07 ounce,2.0grams
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2. Thermal Resistance from Junction to Ambient at 0.375" (9.5mm) lead length, P.C. board mounted with 1.1" x 1.1"
(30 X 30mm) copper heatsink.
60 Hz Resistive or
Inductive Loads
Ground Plane
CURRENT, (A)
Recommended P.C. Board
Mounting.
(A)
3.0
200
2.0 P.C. Board
0 1 Cycle
0 25 50 60 75 100 125 150 175
1 2 4 6 8 10 20 40 60 80 100
AMBIENT TEMPERATURE, ( ° C)
NUMBER OF CYCLES AT 60 Hz
FIG.3-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE
1000 CHARACTERISTICS
20
INSTANTANEOUS FORWARD CURRENT,
10
INSTANTANEOUS REVERSE CURRENT,
100
Tj =100 ° C
1.0
(A)
10
(uA)
T =25 ° C
j
Pulse Width=300us
1% Duty Cycle 0.1
1.0
Tj =25 ° C
0.1 0.01
0 20 40 60 80 100 120 140
0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
60
JUNCTION CAPACITANCE,(pF)
THERMAL RESISTANCE,
50
R JL ( ° C/W)
40
100 Single Lead to heat Sink,
Insignificant Heat Flow
30 Through Other Lead
T =25 ° C
j
f=1MHz
V sig =50mV p-p
10
0.1 1.0 10