Professional Documents
Culture Documents
Aim For Jar Test
Aim For Jar Test
To determine the optimum dosage of coagulant to remove small or charged particles present inside
water by using “Alum” as coagulant.
Principle :
The two basic terms which can exactly explain the happenings of this experiment are “Coagulation”
and “Flocculation“.
2. Flocculation: It is a slow mixing technique which promotes agglomeration and helps the particles
to settle down.
* Generally we encounter very fine and charged clay like particles in water treatment which should
be removed before we continue for further processes. These impurities do not settle by gravity
when the water is passed through a sedimentation tank. The reason being that these are charged
particles, they repel each other and just stay.
* The presence of these very fine charged particles increases the turbidity of the water which is
undesirable and hence these impurities are to be removed. Therefore which will be using a chemical
which dissociates as soon as it added to water and helps in the process of “Coagulation”. In the
present experiment we are using “Alum” [Al2(SO4)3. 18H2O] as the clarifying agent.
*When alum solution is added to water, the molecules dissociate to yield SO4^2- and Al3+. These
charged species combine with the charged colloidal particles to neutralize the charge. A detailed
explanation of the charge removal can be found in the web which will be based on two basic
definitions “Stern potential“ and “Zeta Potential“.
* Through the slow mixing or so called “Flocculation” a process known as agglomeration occurs
which combines the charged particles into a compact whole and helps in the settling of the particle.
That is the reason why we have step of “slow mixing” in the present experiment.
Apparatus:
1. Jar testing apparatus
2. Turbidity meter
Procedure :
3. Now add 1 ml, 2 ml, 4 ml, 8 ml, 10 ml, 12 ml of alum respectively in each one of the beakers.
4. Now insert the paddle of the jar testing apparatus inside the beakers and start it.
5. Initially maintain a speed such that the paddles rotate at an angular velocity of 100 rpm for a time
of 1 minute.
6. Now adjust the speed such that the paddles rotate at 40 rpm/min for a time of 9 minutes.
8. Make an observation as of which of the 6 beakers is most clearer. Also measure the turbidity of
each beaker using a turbidity meter and tabulate your results.
Result:
The optimum value of coagulant dosage from the graph should be reported.
* The optimum value of coagulant generally lies between 8 to 10 for normal water from rivers.
Graph
Advertisements
Share this:
TwitterFacebook
Related
Composition and Hydration reactions of Fly ash used in ConcreteIn "civil engineering"
This entry was posted in civil engineering, Education, Environmental Engineering and tagged Alum,
Aluminium sulfate, Charged particle, Coagulation, Colloid, Drinking water, Electric charge,
Flocculation, PH, Reagent, sedimentation, Water resources, Water treatment, Zeta Potential.
1 Comment
Post navigation
← Previous
Next →
One thought on “Jar test for determining “Coagulant” dosage in Water treatment”
strength says:
July 18, 2014 at 11:39 am
Rate This
Reply
Leave a Reply
Recent Posts
Archives
February 2014
July 2013
June 2013
May 2013
April 2013
January 2013
June 2012
May 2012
April 2012
Categories
civil engineering
construction
Education
Environmental Engineering
General
Pollution control
Uncategorized
Wastewater Treatment
Meta
Register
Log in
Entries RSS
Comments RSS
WordPress.com
:)