Professional Documents
Culture Documents
SAP2000 Analysis Report Fwe Model Name: ESCALERA METALICA - SDB
SAP2000 Analysis Report Fwe Model Name: ESCALERA METALICA - SDB
Contents
1. Model geometry........................................................................................................................................................ 6
1.1. Joint coordinates............................................................................................................................................... 6
1.2. Joint restraints................................................................................................................................................... 8
1.3. Element connectivity......................................................................................................................................... 8
2. Material properties.................................................................................................................................................. 15
3. Section properties................................................................................................................................................... 16
3.1. Frames............................................................................................................................................................ 16
3.2. Tendons........................................................................................................................................................... 22
3.3. Areas............................................................................................................................................................... 22
3.4. Solids.............................................................................................................................................................. 23
4. Load patterns.......................................................................................................................................................... 23
4.1. Definitions....................................................................................................................................................... 23
5. Load cases.............................................................................................................................................................. 23
5.1. Definitions....................................................................................................................................................... 23
5.2. Static case load assignments.......................................................................................................................... 24
5.3. Response spectrum case load assignments................................................................................................... 24
6. Load combinations.................................................................................................................................................. 26
7. Structure results...................................................................................................................................................... 33
7.1. Mass summary................................................................................................................................................ 33
7.2. Modal results................................................................................................................................................... 36
7.3. Base reactions................................................................................................................................................ 38
8. Joint results............................................................................................................................................................. 38
9. Frame results.......................................................................................................................................................... 56
10. Material take-off.................................................................................................................................................. 210
11. Design preferences.............................................................................................................................................. 211
11.1. Steel design................................................................................................................................................. 211
11.2. Concrete design.......................................................................................................................................... 212
11.3. Aluminum design......................................................................................................................................... 212
11.4. Cold formed design..................................................................................................................................... 212
12. Design overwrites................................................................................................................................................ 212
12.1. Steel design................................................................................................................................................ 213
12.2. Cold formed design..................................................................................................................................... 228
13. Design summary................................................................................................................................................. 230
13.1. Steel design................................................................................................................................................ 230
List of Figures
Figure 1: Finite element model...................................................................................................................................... 6
Figure 2: Deformed shape........................................................................................................................................... 33
List of Tables
Table 1: Joint Coordinates............................................................................................................................................. 6
Table 2: Joint Restraint Assignments............................................................................................................................ 8
Table 3: Connectivity - Frame........................................................................................................................................ 8
Table 4: Frame Section Assignments.......................................................................................................................... 10
Table 5: Frame Release Assignments 1 - General, Part 1 of 2.................................................................................... 14
Table 5: Frame Release Assignments 1 - General, Part 2 of 2.................................................................................... 14
Table 6: Material Properties 02 - Basic Mechanical Properties................................................................................... 15
Table 7: Material Properties 03a - Steel Data.............................................................................................................. 15
1. Model geometry
This section provides model geometry information, including items such as joint coordinates, joint restraints, and
element connectivity.
Z
Y X
82 No No No No Yes Yes
83 No No No No Yes Yes
84 No No No No Yes Yes
85 No No No No Yes Yes
86 No No No No Yes Yes
87 No No No No Yes Yes
88 No No No No Yes Yes
89 No No No No Yes Yes
90 No No No No Yes Yes
91 No No No No Yes Yes
92 No No No No Yes Yes
2. Material properties
This section provides material property information for materials used in the model.
3. Section properties
This section provides section property information for objects used in the model.
3.1. Frames
1 Peldaño 8 mm 1,
2 Peldaño 8 mm 1,
FSEC1 1,
PC 100X100X4 1,
MM
PC 135X135X6 1,
MM
PHR C 100X50-2 1,
MM
PR 200X100X4 1,
MM
PTEC 120X60X3 1,
MM
1 1, 1, 1, 1, 1, 1, 1, 1,
2 1, 1, 1, 1, 1, 1, 1, 1,
3 1, 1, 1, 1, 1, 1, 1, 1,
8 1, 1, 1, 1, 1, 1, 1, 1,
10 1, 1, 1, 1, 1, 1, 1, 1,
11 1, 1, 1, 1, 1, 1, 1, 1,
12 1, 1, 1, 1, 1, 1, 1, 1,
13 1, 1, 1, 1, 1, 1, 1, 1,
14 1, 1, 1, 1, 1, 1, 1, 1,
15 1, 1, 1, 1, 1, 1, 1, 1,
16 1, 1, 1, 1, 1, 1, 1, 1,
17 1, 1, 1, 1, 1, 1, 1, 1,
19 1, 1, 1, 1, 1, 1, 1, 1,
20 1, 1, 1, 1, 1, 1, 1, 1,
21 1, 1, 1, 1, 1, 1, 1, 1,
22 1, 1, 1, 1, 1, 1, 1, 1,
23 1, 1, 1, 1, 1, 1, 1, 1,
24 1, 1, 1, 1, 1, 1, 1, 1,
25 1, 1, 1, 1, 1, 1, 1, 1,
26 1, 1, 1, 1, 1, 1, 1, 1,
27 1, 1, 1, 1, 1, 1, 1, 1,
28 1, 1, 1, 1, 1, 1, 1, 1,
29 1, 1, 1, 1, 1, 1, 1, 1,
1 0,8 0,8
2 0,8 0,8
3 0,8 0,8
8 0,8 0,8
10 0,8 0,8
11 0,8 0,8
12 0,8 0,8
13 0,8 0,8
14 0,8 0,8
15 0,8 0,8
16 0,8 0,8
17 0,8 0,8
19 0,8 0,8
20 0,8 0,8
21 0,8 0,8
22 0,8 0,8
23 0,8 0,8
24 0,8 0,8
25 0,8 0,8
26 0,8 0,8
27 0,8 0,8
28 0,8 0,8
29 0,8 0,8
37 0,8 0,8
38 0,8 0,8
39 0,8 0,8
40 0,8 0,8
41 0,8 0,8
42 0,8 0,8
43 0,8 0,8
44 0,8 0,8
45 0,8 0,8
53 0,8 0,8
54 0,8 0,8
3.2. Tendons
TEN1 1, 1, 1, 1, 1, 1, 1, 1,
3.3. Areas
Losa 1, 1, 1, 1, 1, 1, 1,
Losa 1, 1,
3.4. Solids
4. Load patterns
This section provides loading information as applied to the model.
4.1. Definitions
5. Load cases
This section provides load case information.
5.1. Definitions
PP Non-
Composite
MODAL Other
D Non-
Composite
L Short-Term
Composite
Lr Short-Term
Composite
G Other
Wx Short-Term
Composite
Wy Short-Term
Composite
Fx Short-Term
Composite
Fy Short-Term
Composite
Ex Short-Term
Composite
Ey Short-Term
Composite
Fx 0,05
Fy 0,05
Ex 0,05
Ey 0,05
6. Load combinations
This section provides load combination information.
7. Structure results
This section provides structure results, including items such as structural periods and base reactions.
Z
Y X
8. Joint results
This section provides joint results, including items such as displacements and reactions.
9. Frame results
This section provides frame force results.
1 0, 0, 0, 0, 0, 0, 0,
2 0, 0, 0, 0, 0, 0, 0,
3 0, 0, 0, 0, 0, 0, 0,
1 0, 0, 0, 0, 0, 0, 0,
2 0, 0, 0, 0, 0, 0, 0,
3 0, 0, 0, 0, 0, 0, 0,
8 0, 0, 0, 0, 0, 0, 0,
10 0, 0, 0, 0, 0, 0, 0,
11 0, 0, 0, 0, 0, 0, 0,
12 0, 0, 0, 0, 0, 0, 0,
13 0, 0, 0, 0, 0, 0, 0,
14 0, 0, 0, 0, 0, 0, 0,
15 0, 0, 0, 0, 0, 0, 0,
16 0, 0, 0, 0, 0, 0, 0,
17 0, 0, 0, 0, 0, 0, 0,
19 0, 0, 0, 0, 0, 0, 0,
20 0, 0, 0, 0, 0, 0, 0,
107 0, 0, 0, 0, 0, 0, 0,
108 0, 0, 0, 0, 0, 0, 0,
109 0, 0, 0, 0, 0, 0, 0,
110 0, 0, 0, 0, 0, 0, 0,
125 0, 0, 0, 0, 0, 0, 0,
126 0, 0, 0, 0, 0, 0, 0,
127 0, 0, 0, 0, 0, 0, 0,
128 0, 0, 0, 0, 0, 0, 0,
129 0, 0, 0, 0, 0, 0, 0,
130 0, 0, 0, 0, 0, 0, 0,