Professional Documents
Culture Documents
9.2.3.3 Packet Tracer - Configuring An ACL On VTY Lines Instructions IG
9.2.3.3 Packet Tracer - Configuring An ACL On VTY Lines Instructions IG
9.2.3.3 Packet Tracer - Configuring An ACL On VTY Lines Instructions IG
Version)
Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only.
Topology
Addressing Table
Objectives
Part 1: Configure and Apply an ACL to VTY Lines
Part 2: Verify the ACL Implementation
Background
As network administrator, you must have remote access to your router. This access should not be available to
other users of the network. Therefore, you will configure and apply an access control list (ACL) that allows PC
access to the Telnet lines, but denies all other source IP addresses.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of
Packet Tracer - Configuring an ACL on VTY Lines