Professional Documents
Culture Documents
Amigurumi Free
Amigurumi Free
Tools:
1. Crochet hook 1.5mm (or whichever size you prefer that works best with
your Yarn);
Materials:
3. Stuffing;
Abbreviations:
St = stitch
Sts = stitches
ch = chain
sl st = slip stitch
sc = single crochet
dc = double crochet
dec = decrease: crochet the next 2 stitches together creating one stitch
Rnd = round
sl st = slip stitch
Rnd 8р,9- 36 sc
The sole is ready. Cut cardboard or plastic inserts the size of the sole (I use old
computer disk).
change color
Rnd 10- 36 sc
Rnd 11- (dec, 10 sc)x3 [33]
Complete knitting.
Rnd 8,9- 36 sc
The sole is ready. Cut cardboard or plastic inserts the size of the sole (I use old
computer disk).
change color
Rnd 10- 36 sc
Complete knitting.
Now we will attach the legs, if your front legs are longer, be careful, first take the 2
front legs, then the 2 rear legs, then
Rnd 1- (18sc Foreleg, 5sc tummy)x2, (18sc Hindleg, 5sc tummy)x2 [92]
Rnd 5- (dec, 13sc, dec, 5sc)x2, dec, 13sc, dec, 1sc, dec, 13sc, dec, 5sc [76]
Rnd 6- 76 sc
Rnd 9- 64sc
Rnd 10- 12sc, dec, 3sc, dec, 24sc, (dec, 1sc)x2, dec, 14sc [59]
Staff Hindlegs
make a tail
Rnd 5- dec, 1sc, dec, 1sc, 4sc, dec, 1sc, dec, 4sc [14]
Complete knitting.
staff
Neck
Rnd 4- 33sc
Button joint is made with 2 buttons and wire. Take a button (about 2-3 cm in
diameter) with 2 holes and a piece of wire about 5 cm long. Bend the wire into U
shape and insert into button holes.
Insert this into the body – the button inward, the wire outwards – then decrease,
working around the wire, closing the opening, leave 6-7 sc. Cut off yarn, weave in the
end.
Do not overdo it: while turning, the wire can rub too small of an opening.
Head
Crochet in a spiral with no lifting chains, stuff as you go, tight but not deforming the
shape.
6 ch in a circle (6 ch, sl st in the 1st chain). This is the opening for the joint,
connecting the head with the body.
Rnd 18- 7sc, dec, 4sc, dec, 4sc, dec, 57sc [75]
Rnd 20- 6sc, dec, 8sc, dec, 6sc, dec, 11sc, dec, (10sc, dec)x3, [68]
Rnd 21- 68
Rnd 23- 60
Rnd 31- 42
Place the eyes, see if you like how they look there. Use scissors to widen the gap
between the stitches (do not cut, just puncture), insert the eyes and secure the clamp.
Take the body, with the wire sticking out, pull both ends of the wire through the
opening in the head (not stuffed), and through the holes in the button that you place
inside the head (the button must be big, so that the head doesn’t lean to the side),
twist the wire ends together, making sure that the head can be turned with a little bit
of force.
staff
Do contractions now, using thread (yarn) and needle: pull the thread from both
corners of the eye to the neck, making cheeks.
If you are doing contractions (needle sculpting) for the first time, here is how:
You will need a long needle and thread (yarn). Making right cheek.
Thread the needle (you will need about 30cm of thread), tie a knot on one end.
Attach the thread to the front of the head close to the button edge, hiding the knot
inside the head.
Insert the needle with the thread in the directions shown in the photo below: first from
neck to the inside corner of the eye. Pull, until you get a plump cheek. Hold the cheek
with your fingers, now sew in the opposite direction, skipping one stitch. Pull more and
fix with a knot.
Do not cut the end. Skip 2-3 stitches to the left (hiding the thread inside the head), fix
the thread with a knot. Insert the needle and exit it through the outer corner of the
eye. Pull the thread, sew in the opposite direction, skipping a stitch.
16 ch.
Rnd 1- Sc in 2nd ch from hook, 13sc, inc. Keep working around the chain – inc,14sc
[32]
Rnd 2- 5sc, 5hdc, 4dc, (2dc shell)x4, 4dc, 5hdc, 5sc [36]
Rnd 3- 36
Rnd 4- 5sc, 5hdc, 4dc, (2dc shell)x7, 4dc, 5hdc, 5sc [44]
16 ch.
Rnd 1- Sc in 2nd ch from hook, 13sc, inc. Keep working around the chain – inc,14sc
[32]
Rnd 2- 5sc, 5hdc, 4dc, (2dc shell)x4, 4dc, 5hdc, 5sc [36]
Rnd 3- 5sc, 5hdc, 4dc, (2dc shell)x7, 4dc, 5hdc, 5sc [44]
Horns Make 2
2 ch
Hello, we share a new amigurumi reindeer pattern for you. You can visit our website
for beautiful patterns from each other.
Materials
Yarn color (white, light brown, dark brown, pink, dark pink)
Crochet hook
Sewing thread
Filler
Eyes 0.8cm
Legend
Rnd series
İnc- increase
Dec Decrease
Ch-air loop
Dc double crochet
Legs, we knit with light brown yarn
2. Rd .: 6 inc (12)
5. Rd .: 24sc
7. Rd .: 24 sc (24)
9.10. Rd .: 24 sc (24)
Tie the second part, type 6 ch and connect with the second foot ss
Body
5. Rd .: 60 sc (60)
7. Rd .: 58 sc (58)
9. Rd .: 56 sc (56)
11. Rd .: 54 sc (54)
13. Rd .: 52 sc (52)
17. Rd .: 48 sc (48)
19. Rd .: 46 sc (46)
21. Rd .: 44 sc (44)
Head
2. Rd .: 6 inc (12)
larger eyes, position so that the edge of the felt is visible, as in the photo.
Place the eyes between the 16th and 17th rows of the head, the distance between
them about 14 columns, fasten the eyes.
Ears (2 parts)
2. Rd .: 4 inc (8)
Place the inner ear on the large and fold in half at the base,
1. Rd .: chain of 4 ch2. We start from the second loop: 3sc, ch lift (3)
8. Rd .: 10sc, ch (10)
Muzzle
White inc
2. Rd .: 6 inc (12)
2. Rd .: 6 inc. (12)
4. -7.Rd .: 18 sc
10. – 16.Rd .: 16 sc
18. -23.Rd .: 15 sc
25. Rd .: 14 sc (14)
26. Rd .: fill, fold the part in half and knit over both walls, close
Collar
1. Rd .: chain of 11ch
Connect the edges to the body at the neck, fasten, then p rush head
Horns (2 parts consist of 2 parts – large and small)
1 item
3. -5. 6 sc (6)
2 detail
Tie the bottom of the sweater and sleeves with white yarn, embroider dots.
We share a cute cat pattern with you. You can visit our website for beautiful
amigurumi patterns.
ATTENTION!!!
1. This pattern is free. To knit this doll you must have a basic knowledge of crochet!
2. You can do what you want with the finished doll: donate it, sell it, etc. The only
thing I ask – is that you name your author (Tatiana Kostochenkova) and, a link to my
group in vk.
3. It is prohibited to copy or share this pattern in whole or in part on the internet.
1. Yarn Art Jeans yarn in cream color (03), beige (07), brown (40) and green (29);
2. Needle of №2;
3. Stuffing;
9. Sewing needle.
ABBREVIATIONS
ch – chain;
sc – single crochet;
dc – double crochet;
HEAD
Place the eyes between rounds 16 and 17, with a separation of 10 sc.
HEAD
FOLD EYES
To make the crease for the eyes, Insert the needle through the head, fix the thread,
we take it out at a point of distance from the eye between rounds 16 and 17 (point 1),
we introduce the needle one row below
between rounds 17 and 18 (point 2), pull the thread, pass it to the second eye
between rounds 16 and 17 (point 3), pull the thread, insert the needle one row lower
between rounds 17 and 18 (point 4), pull the thread. Repeat this about 2-3 times. Fold
ready.
HEAD
HOCICO FOLD
To make the muzzle fold, Insert the needle into the head, fix the thread, remove it
between rows 16 and 17 near the second eye (point 1), insert it 4 rounds below at
point 2, pull the thread, then , insert the needle in the same round 3 sc to the left by
point 3, pull the thread, we return between rows 16 and 17 near the first eye (point
4), pull the thread.
Fold ready.
HEAD
We make the snout. Embroider the eyelids with cream thread. With black thread
embroider eyebrows and eyelashes. With beige thread embroider the nose.
HEAD
EARS
Fold in half and join weaving to sc. Top off, leaving a long thread to sew.
Knit the second ear in the same way. Color with a pastel wax.
LEGS
1 round – 8 ch + 1 ch;
2 round – 7 sc, 3 sc in 1 pto, 6 sc, inc (18);
4 round – 1 sc, inc, 6 sc, (1 sc, inc) * 3, 6 sc, (1 sc, inc) * 2 (30);
5 round – 2 sc, inc, 6 sc, (2 sc, inc) * 3, 6 sc, (2 sc, inc) * 2 (36);
11 round – 30 sc;
LEGS
13 round – 24 sc;
15 round – 18 sc;
Fill.
17 round – 12 sc;
Fill. Top off, hide the thread. Knit the second leg in the same way. When you finish
knitting the second leg, the thread is not cut.
BODY
Knit with cream color. Place the two legs together, find the center and work on the
second leg the sc necessary to reach it, join the two legs with 1 sc.
26 round – 11 sc, inc, 11 sc (on one leg), 11 sc, inc, 11 sc (on the other leg) (48);
BODY
BODY
Sew the head and body together, firmly filling the neck.
ARMS
Fill.
9- 28 round – 12 sc.
Fill, the upper part of the arms is filled slightly. Fold in half and join weaving sc. Top
off, cut the thread leaving a long thread to sew.
ARMS
TAIL
3 round – 8 sc;
5 round – 12 sc;
13 round – 15 sc;
15 round – 14 sc;
19 round – 12 sc;
21 round – 11 sc;
23 round – 10 sc;
25 round – 9 sc;
27 round – 8 sc.
TAIL
DRESS
Knit the dress in rows with green thread, and at the end of each round knit 1 ch
4 round – 54 sc;
6 round – 72 sc;
8 round – starting at the 8th point, 10 sc, jump 16 sc, 20 sc, jump 16 sc, 10 sc (40);
10 round – 44 sc;
11 round – 10 sc, 2 inc, 20 sc, 2 inc, 10 sc (48);
15 round – start the round with 2 ch, 4 dc in 1 point, jump 3 points, 5 dc in 1 point,
jump 3 points, repeat until the end of the round.
DRESS
DRESS
Cut a 6 * 35 cm strip on the cotton fabric, sew the edges by hand or by machine.
When making the upper hem, place the tulle fabric under it. The tulle should protrude
slightly below the skirt. Then you have to purse your waist.
DRESS
DRESS
Sew the button to the flower and the flower to the dress.
DRESS
Knit some ties for shoes. To do this, make a magic ring, knit 2 ch, 2 dc, 2 ch, sl-st, 2
ch, 2 dc, 2 ch, sl-st, close the ring, roll the thread in the center and sew the shoe.
You can follow us for wonderful amigurumi patterns that you can learn with velvet
rope. Now I share the penguin pattern with you.
Pattern:@deti_toys_amigurumi
List of materials
Plush yarn of white color and the color of “Cloak” about 0.5 skeins
from YarnArt Jeans and from yarn with wool in the composition
Crochet hook for plush yarn (I crochet 3.5), crochet hook for semi-cotton yarn (I
crochet 2), crochet hook for eye yarn (I used 1.25)
Toy filler
List of abbreviations
CH – air loop
Sc – single crochet
İnc – increase
Dec – decrease
Body head
4p: 18sc for the first part, 18sc for the second part (36)
7-13r: 48sc
15p: 40sc
17p: 36sc
19p: 30sc
21p: 24sc
27-32r: 42sc
35p: 30sc
36p: (3sc, dec) x6 (24). If you will use plastic eyes – insert them between 31 and 32
rows
39p: 6dec. Fasten the thread, tighten the hole, hide the thread.
Beak
6p: (4sc, inc) x3 (18). Cut the thread, leaving the end for sewing. Try on and sew a
beak between 5 and 9 next to the head.
Paws
1p: 10sc, from the second loop from the hook 8sc, 3sc to the last loop, 7sc, inc (20)
3-6p: 26sc
5p: 22sc
6p: dec, 7sc, 2dec, 7sc, dec (18)
7-9r: 18sc
10p: dec, 5sc, 2dec, 5sc, dec (14) fill the front part a little.
Black yarn
1p: 3Ch, from the second from the hook loop 1sc, 3sc to the last loop, inc, Ch lift (6)
3p: 4sc
4p: 4sc
14-15r: 30sc
17-18r: 30sc
21p: 9sc
29-32r: 26sc
38p: 6sc
41p: dec
Cut the thread, hide it. Try on and sew a raincoat on the body of a penguin.
Wings
First we knit 2 white details, then we knit black, we attach the white part. Again the
black part and tie the white.
1p: 2Ch, with the second from the hook loop 2sc
2p: 2sc
4p: 4sc
6-9p: 6sc
11p: 4sc
12p: 2dec
Hat
The number of loops depends on the yarn you choose and the circumference of the
head of the resulting penguin.
1p: dial a chain of air loops equal to the circumference of the penguin’s head and
close it into a circle
3-5p: 2Ch lift, embossed columns to the end of the row, SL-ST
How to knit embossed columns see here (video on embossed columns)
11p: 2Ch lift, (1DC, dec) to the end of the row, SL-ST
12p: 2Ch lift, (1DC, dec) to the end of the row, Sl-St
Scarf
Make a chain of air loops of the desired length. Make a 2Ch lift and knit the first row of
DC. Rotate knitting, 2Ch lifting, embossed posts to the end of the row. Thus, knit the
required number of rows. Our scarf is ready.
Guardar
Abbreviations:
ch → chain
sc → single crochet
inc → increase
dec → decrease
Legs: (2 parts)
Pink yarn
2: 6 inc (12)
3: (1 sc, inc) x 6 (18)
6-7: 24 sc (24)
White yarn
Blue yarn
Connect the legs together, knitting 18 sc on one leg, 18 sc on the other (36)
Body.
[32 knit behind the back wall – then there will be a skirt later]
37: 42 sc (42)
40:36 sc (36)
42: 33 sc (33)
44:30 sc (30)
46: 27 sc (27)
48: 24 sc (24)
White yarn
Head:
56: 48 sc (48)
2: 6 inc (12)
We put the parts in pairs on top of each other and tie them –
Hands: (2 parts)
White yarn
2: 6 inc (12)
8: 15 sc (15)
Pink yarn
9: 15 sc (15)
Blue yarn
Beanie:
11:48 sc (48)
12: 54 sc (54)
13-18: (6 rows) 54 sc (54)
19-20: 54 sc (54)
Skirt
1: Attach to the 32th row of the body and knit the increments in each 3 loop (80)
2-4: 80 sc (80)
Pink yarn
5:80 sc
Tail:
2: 6 inc (12)
7: 6 dec (6)
The height of the cow and the goby is 8.5 cm, the baby is 7.5 cm. The size depends on
the thickness of the yarn and the density of knitting.
Materials needed:
3. Hook number 1
4. Hollofiber
5. Wide-eye needle
6. Clay moment
8. The wire
Legend
– ch – air loop
– sc – single crochet
The number in parentheses at the end of each row indicates how much
1 row: dial 2 ch and knit into the second loop from the hook 6 sc
11-21 row: 60 sc
23-24 row: 54 sc
26-27 row: 48 sc
29-30 row: 42 sc
31-32 row: 48 sc
34-36 row: 30 sc
1 row: dial 2 ch and knit into the second loop from the hook 6 sc
11-17 row: 60 sc
21 row: change the thread to melange, knit for the back halves of loops 42 sc
22-23 row: 42 sc
25-32 row: 36 sc
1 row: dial 2 ch and knit into the second loop from the hook 6 sc
2 row: 6 sc
4 row: 12 sc
5 row: (1 sc, inc) * 6 (18)
11 row: 12 sc
1 row: dial 2 ch and knit in the second loop from the hook 4 sc
2 row: 4 sc
4-5 row: 6 sc
Stuff
1 row: dial 2 ch and knit into the second loop from the hook 6 sc
4-5 row: 12 sc
6 row: change the thread to melange, knit for the back halves of loops 12 sc
7 row: 12 sc
9-22 row: 10 sc
Finish sl-st, fold the row in half and knit 5 sc through both canvases
Hands (we knit with a St. Brown thread) (2pcs)
1 row: dial 2 ch and knit into the second loop from the hook 5 sc
4-5 row: 10 sc
6 row: change the thread to melting, knit for the back halves of loops 10 sc
7 row: 10 sc
9-20 row: 8 sc
Finish sl-st, fold the row in half and knit 5 sc through both canvases
1 row: dial 2 ch and knit into the second loop from the hook 6 sc
Tail
Glue and wrap the thread, make a brush and glue The udder (knit with a pink thread)
of our cow consists of 4 nipples, and an udder. First we knit the nipples, and then the
udder
1 row: dial 2 ch and knit into the second loop from the hook 6 sc
Udder
1 row: dial 2 ch and knit into the second loop from the hook 6 sc
2 row: inc * 6 (12)
Assembly
Sew the head to the body, Sew on ears, horns and eyes, glue half beads Pins the legs
with pins, choosing the best position so that our ladybug fits well and does not fall, we
insert the wire and hide it in the place where we will sew our foot (we do this, so that
the wire along the sewing of the legs was not visible).
The design of the muzzle, with pins, we outline where we will have nostrils. Twice we
pass the thread through our marks, and wrap around the threads with pink yarn, so
that we get beautiful neat nostrils.
We embroider a smile with black sewing thread, and tint the cheeks with a red pencil.
I made a boy a heart, and a girl a flower in her mouth. You can come up with
something inam more like it.
Cute amigurumi mouse crocheted from Baby Cotton GAZZAL yarn. For knitting you
will need yarn in white, blue, blue and green.
Legend:
ch – air loop
sc – single crochet
İnc – increase
dec – decrease
Head
7-8. 36 sc
14-24. 48 sc
You can attach safety eyes and nose. The eyes are attached in the 11th row, between
them – 8 loops. Under the eyes you can make a felt circle.
From this moment, you can fill the part with filler.
31.6 dec
The ears
Pink yarn.
5.24 sc
Finish knitting.
5.24 sc
6. We knit together with the inner part of the ear, capturing both sides of the loop of
the main part of the ear and the back wall of the loops of the inner ear – 24 sc
8-14. 42 sc
We knit the second leg in the same way, we do not cut the thread.
15. 33 sc along the second leg, attach the first leg, begin to knit from the loop on
which they finished (i.e., behind the leg), 33 sc, connect to the second leg. Thus,
between the legs there remains an opening in 18 loops, which we will close later.
16-21. 66 sc
23-25. 60 sc
27-29. 54 sc
32-33. 48 sc
35-38. 42sc
40-43. 36 sc
45-47. 30 sc
49-51. 24 sc
Hands (2 pcs.)
4-6. 18 sc
9-11. 12 sc
13.11 sc
14.9 sc, dec (10)
15-29. 10 sc
30.3 dec
Legs (2 pcs.)
6-8. 24 sc
12. If you want to make striped socks for the mouse, alternate the colors in each row.
13-15. 17 sc
Sew on legs.
Tail
2.4 sc
We share Amigurumi Cute Cat and Bunny Free Crochet Pattern. I hope you will like it.
You can browse our website for new patterns.
1. Gazzal baby cotton yarn (60% cotton, 40% acrylic, 50g, 165m) of the main color is
half a skein and not a lot of complementary colors.
2. Hook under your yarn. I have number 1.75 for the main and number 2 for clothes.
3. Cotter pins: T-cotter pin (size 2×20) – 4pcs, O-cotter pin (size 2×25) – 2pcs.;
wheels: 15mm – 4pcs. for pens, 18mm
– 4 things. for legs, 22mm – 2pcs. for fastening the head; washers – 10 pcs.
7. Round-nose pliers.
9. Dry pastel for tinting or any other means of tinting familiar to you (optional),
eyelashes for dolls (optional).
Stage 1
Designations:
İnc – increase;
Dec – decrease;
Sc is a single crochet;
Dc – double crochet;
All parts are knitted in a spiral, without a lifting loop, unless otherwise stated in the
description.
1p – 5ch, we knit 3sc, 3sc loops 1 from the second from the hook, expand the knitting
and continue to knit on the other side of the chain 2sc, inc (10sc)
4-6p -20sc
9-11r – 12sc
To the remaining blo 11 rows we attach the thread of the main color
12-20r – 12sc
We stuff the leg. In the 18th row we put the cotter pin
21p – 6dec
The cotter pin mount is assembled as follows: a washer is put on under the cotter
head, then a disk. The mount is inserted into the limb.
2p – incx6 (12sc)
4-6r – 15sc
8-19p – 12sc
Do not tightly fill the handle, in the 17th row we put the cotter pin. Note the inside of
the handle where there are 2 decreases.
20p – 6dec
Cat tail
White
2p – incx6 (12sc)
3-7r – 12 sc
8-21r – 12sc
Fill in half, fold in half and tie sl-st. Fasten and cut the thread, leaving a tail for sewing.
Bunny tail
2p – incx6 (12sn)
4-6r – 15sc
2 stage
2p – incx6 (12sc)
7-11r – 36sc
Fold the part in half (marker at the back) in the 8th row on the sides to fix the legs (on
the cotter pin we put on a disk, washer and twist the antennae)
13-15r – 33sc
17-19r – 30sc
21-22p – 24sc
23p – (2sc, dec) x 6 (18sc)
24-25r – 18sc
In the 22nd row, set the handles, fill the body. Install the swing head mount
27p – 6dec
– wheels 2 pcs,
– washers 2 pcs,
– pliers.
1. insert one cotter pin into another, for this we do not bend a lot of antennae of one
cotter pin;
2. on top, on one of the cotter pins install the disc and washer;
4. The finished part of the cotter pin is inserted into the un sewn hole in the body. Pull
the hole.
5. insert the cotter pin without a disk into the head, put on the disk and the washer
and twist the antennae of the second cotter pin.
2p – incx6 (12sc)
9-15r – 48sc
16p – 10sc, 3dec, 8sc, put an additional marker, 8sc, 3dec, 10sc (42sc)
17-18r – 42sc
20-21r – 36sc
23p – 30sc
Stuff your head evenly. Please note that the head should not be pulled up
3 stage
Bunny ears
3p – 9sc
5p – 12sc
Cat’s ears
2p – incx5 (10sc)
3p – 10sc
5p – 15sc
Fold the eye in half and tie sl-st. Fasten and cut the thread, leaving a tail for sewing.
Decor
We introduce a needle with a long thread at point 1 and output at point 2, leaving the
tail at point 1. Enter from point 2 to point 3 and output at point 1 (1-2-3-1), we tighten
it well. From point 1 we introduce the needle 1-2sc higher and output at point 4. Enter
at point 5 and output at point 4 (1-4-5-1). We pull away. Repeat if necessary. Fasten
and hide the thread. We find a good arrangement of the ears and sew them.
We make a toy to your liking. I glued cilia to my eyes. Mouline, divided in half,
embroidered nose, line under the nose, eyebrows. Dry pastel tinted cheeks, the inside
of the ears and mouth.
4th stage
3p – 22sc
4p – Attach the thread to the remaining blo 3 rows and knit 22sc
5-7p – 22sc
Whip
We knit 3sc, make ch and then we will knit in rotary rows, making ch rise in each row.
The strap should be centered in the back. We knit 7 rows of 3sc. Sew a strap to the
inside of the shoe
Strap
2-23r – 2sc
Tie a sl-st, sew on buttons, put the strap in the strap on the shoe.
1 part
25ch, from the second from the hook of the loop: 4 sc, 4 dc, 3hdc, sl-st, 3hdc, 4dc, 4sc
2 part
3 part
Dial a chain equal to the circumference of the head and connect into a ring.
Sew together the two edges of the first part of the bow, apply the third part. Second
part all
Sundress
Dial a chain of ch equal to the circumference of the abdomen and connect into a ring
(I have 40ch).
2p – 40sc
3p – inc to every sc
Knit without increments to the desired length (I have 6 rows). If desired, change the
color and knit 2 more rows.
“Breastplate”
Mark the required width with pins, attach the thread and knit sc in rotary rows,
making ch lifting (I have a width of 11sc).
5p – 9 sc
7p – 7 sc
Webbing
Close the ch chain into a ring (I have 8ch), without cutting the thread, dial the ch
chain of the length that your straps will have (22sc). Tie the sc chain, knit 10sc in the
ring, turn the knitting and knit sc on the other side. Fasten and cut the thread, leaving
a tail for sewing. Sew on straps, buttons, decorate a sundress.
Dress
Dial a chain of ch equal to the circumference of the neck (20ch + 1ch lift)
2p – no change (40sc)
6-7r – 40sc
9p – inc to every sc
10-16r – 90 sc
Tie the halves of a sl-st dress, making buttonholes from the ch chain.
Sleeve
1p – 27 sc
Fasten and cut the thread. The second sleeve is tied in the same way.
A new pattern, amigurumi sailor bunny. You can visit our website for beautiful free
patterns from each other.
Legend
İnc – increase
Dec – decrease
Ch – air loop
Sc – single crochet
dc – double crochet
We knit in a spiral, without a lifting loop, unless otherwise stated in the description.
– Alize Softy yarn (100% micropolyester, 50 g, 115 m) is not much for the face
– Gazzal Baby Cotton yarn (60%: Acrylic 40%: Cotton, 50g, 165m) for dress and beret
– Hook No. 2 and 2.5 (for beret)
– Cotter pins: T-cotter pin size 2.5×28 – 4pcs, O-cotter pin size 2×25 – 2pcs
– Discs: 20mm – 4 pcs. (For the upper legs), 22mm – 5 pcs. (For the lower legs and 1
in the body), 35mm – 1 pcs. (In the head).
If you use disks made of plywood, pressed cardboard, then it is necessary to use
washers – 10 pcs.
– Eyes for toys with a diameter of 14 mm, semi-cotton yarn for embroidery of
proteins, false eyelashes – 1 pc.
2 – inc * 6 (12sc)
4-5 – 18sc
8-17 – 12sc
Fill foot. Having retreated two rows down from the last row, set
mount.
18 – dec * 6
4 – 28sc blo
5-6 – 28sc
10-18 – 12sc
19 – dec * 6
2 – inc * 6 (12sc)
7-8 – 36sc
10sc (36sc)
10-13 – 36sc
15-16 – 32sc
19-20 – 24sc
22 – 18sc
24 – dec * 6
Head
2 – inc * 6 (12sc)
9-17 – 48sc
Set your head. To fill as knitting decreases.
24 – dec * 6
Tail
2 – inc * 6 (12sc)
3-5 – 12sc
Muzzle
1 – 6ch, knit from the second from the hook of the loop: 4sc, 3sc in 1,
expand the knitting and continue on the other side of the chain:
4 – 26sc
The ears
1 – 31ch, knit from the second from the hook of the loop: inc,
5sc, inc
2 – 7sc, 8hdc, 5dc, (3dc, inc dc) * 6, 5dc, 8hdc,
7sc
3 – 70sc
Decor
Insert the needle at point 5, withdraw at point 1, insert at point 2 and bring to
1sc above point 5. From this point, enter point 5, withdraw to point 1,
enter at point 2 and output at point 5. Tighten and fasten the thread. For
Sew on ears (I sewed at eye level) and embroider eyebrows. From white
embroider yarn whites of the eyes (can be embedded from felt). Stick or
Dress
I remove the first edge loop, the second I knit the wrong one.
1 – 26knit
2 – 26purl
26p – 4p (raglan) = 22
22p divided into 5 parts = 4.4
4p – back
4p – sleeve
6p – before
4p – sleeve
4p – back
4 – all purl
6 – all purl
8 – all purl
10 – all purl
12 – all purl
15 – all knit
16 – all purl
18 – all purl
Knit knit without increment, to the desired length. Color change alternated
every 3 rows.
Beret
2 – inc * 8 (16dc)
8-12 – 56dc
Change color
15-17 – 40dc
You can also visit our website for a great pattern amigurumi colorful bunny pattern
and many free patterns.
Pattern: @odessaviktorytoy
Legend:
sc – single crochet
inc – increase
dec – decrease
ch – air loop
dc – double crochet
brackets 6 times.
Head:
2) (inc) x6 (12)
Ears (2pcs):
Arms (2pcs):
2) (inc) x6 (12)
Legs (2pcs):
2) (inc) x6 (12)
8) 22sc
Tail:
Body:
2) (inc) x6 (12)
13) 54sc
16) 48sc
18) 42sc
20) 36sc
Skirt:
Collar:
Bow:
1) 30ch
2-5) 30sc (4 rows)
Bandage:
2) 50hdc.