Professional Documents
Culture Documents
Calculation of Stresses in Footings Subjected To Uniaxial or Biaxial Moments
Calculation of Stresses in Footings Subjected To Uniaxial or Biaxial Moments
MB MA
HA
HB
Lever arm of
horizontal force 2
CB CA 3
t
1
4 A
B
Design calculation sheet
Project no.: KAIG Date: 24/03/2020 Sheet no.: 1 of 2 Computed by: HIS
Checked by: HIS
Subject: Ticket facility booth anchor botls connection to the R.C foundation verification
Approved by:
Input Data:
CA = 0.625 m (Column's dimension parallel to A direction)
CB = 0.625 m (Column's dimension parallel to B direction)
A= 2.8 m (Long dimension of footing or dimension resisting moment in case of uniaxial moment)
B= 2.8 m (Short dimension of footing)
t= 0.8 m (Total thickness of footing)
Foundation depth = 2.15 m (Distance measured from foundation level to finished ground level )
Gs = 1.8 t/m3 (Specific gravity of soil)
qall(net) = 15 t/m2 (Net bearing capacity)
Type of stress used : NET ("Net" or "Gross" )
% Taken of Backfilling = 0 % (Considered in checking overturning and sliding)
4 A
B
Lever arm of
horizontal force 2
CB CA 3
Design calculation sheet t
1
Project no.: KAIG Date: 24/03/2020 Sheet no.: 1 of 2 Computed by: HIS
4
Checked by: A HIS
Subject: Ticket facility booth anchor botls connection to the R.C foundation verification B Approved by:
Design calculation sheet
Project no.: KAIG Date: 24/03/2020 Sheet no.: 1 of 2 Computed by: HIS
Checked by: HIS
Subject: Ticket facility booth anchor botls connection to the R.C foundation verification
Approved by:
44 33
A
A
HBB
Check of Overturning Due to Total Load:
Pserv = -21.68 t (Total service load)
eA = 0.578 m (e<L/3 Safe ) eB = 0.578 m (e<L/3 Safe )
(eA/A)^2+(eB/B)^2 = 0.085 <1/9 (Overturning is Safe)
L)
3
3
Design calculation sheet
Project no.: KAIG Date: 24/03/2020 Sheet no.: 1 of 1 Computed by: HIS
Checked by: HIS
Subject: Ticket facility booth anchor botls connection to the R.C foundation verification
Approved by: