Professional Documents
Culture Documents
MCQ Paper Set 3
MCQ Paper Set 3
12 In two high rolling mill, what is the direction of rolling of the two rollers?
a Clockwise-anticlockwise c Anticlockwise-Anticlockwise
b Clockwise-clockwise d Stationery-clockwise
13 In two high rolling mill, if the direction of the rollers is reversed, what is it called?
a Two high reversing mill c Two high backward mill
b Two high anti mill d Two high beneath mill
15 Which of the following property does not improve in hot rolling process, of a cast?
a Boiling point c Ductility
b Toughness d Shock resistance
22 1. Which of the following types of fuel gas is commonly used in gas welding?
a Acetylene c Biogas
b Methane d Coal gas
23 1. Oxy-acetylene process is most suited for which of the following process of joining?
a Metal sheets c Metal wires
b Metal tubes d Metal bars
25 The distance from the center of arc to the tip of electrode is called what?
a Arc length c Arc distance
b Arc crater d Arc depth
26 Which material is not used for making non-consumable electrodes?
a Sodium c Carbon
b Tungsten d Graphite
27 The process of carbon arc welding is not used for which of the following material?
a Iron c Copper
b Aluminium d Bronze
32 The body of the tailstock can be adjusted by clamping with the help of
a bolts and plates both c bolts
b plates d none of the mentioned
36 In drlliing, the portion between the point and the shank is called______
a both body and drill c body
b drill d none of the mentioned
39
In table top drilling machine, feed can be operated by_____
a lever c spindle
b gear mechanism d none of the mentioned
45 The device, fed to the control unit of NC machine tool which sends the position command
a tape c feedback unit
b controller d none of the above
47
In CNC machine tool, the part program entered into the computer memory
a can be used again and again c can be used 2 times
b can be used only once d cannot say
50 In CNC, the depth that the tool is plunged into the surface is called as ______
a depth of cut c depth of tool
b feed d working depth