Professional Documents
Culture Documents
Sikaflex - 11 FC: One Component Polyurethane Sealant / Adhesive
Sikaflex - 11 FC: One Component Polyurethane Sealant / Adhesive
Edition 2, 2011
Identification no. xxx
Version no. 0010
Sikaflex®- 11 FC
®
Sikaflex - 11 FC
One Component Polyurethane Sealant / Adhesive
®
Description Sikaflex - 11 FC is a fast curing, one-component polyurethane sealant /adhesive
with permanent elasticity.
Uses As an elastic adhesive for :
Assembling metal framed buildings.
Construction
Attention
This is a Product data sheet on strength of the JIS A 5758 1992.
Back
Table of contents
Staining No
JIS A 5758
Class of durability Similar 8020
JIS A 5758
Shelf Life 9 months
( at +5°C ~ + 25°C )
Extrudability (sec) 5oC 6
JIS A 5758 20oC 3
o
Slump (mm) 50 C vertical 0
JIS A 5758 horizontal 0
o
Tack free time (hours) 20 C 3
JIS A 5758
Curing speed 5°C Over 7 days
At 5 mm (thickness) 20°C 2 days
35°C 1 day
Shore A hardness 42
JIS K 6301
o o
Service temperature - 30 C ~ +80 C
Capacity
Ozone resistance Good
JIS A 5758
Tensile strength
JIS A 5758 After 20°C 43
Curing - 10°C 68
50% modulus After 20°C 70
(N/cm²) Heating - 10°C 113
After Immersion
20°C 45
in water
After 20°C 131
Curing - 10°C 219
Tensile strength After 20°C 144
(N/cm²) Heating - 10°C 207
After Immersion 20°C 116
in water
After 20°C 420
Curing - 10°C 460
Elongation at After 20°C 330
break Heating - 10°C 300
(%) After Immersion
20°C 410
in water
* The stated figures are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
Legal Notes The information, and, in particular, the recommendations relating to the application and end-use of Sika
products, are given in good faith based on Sika’s current knowledge and experience of the product when
properly stored, handled and applied under normal conditions in accordances with Sika’s
recommendations. In practice, the differences in materials, substrates and actual site conditions are such
that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising
out of any legal relationship whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the product must test the product’s
suitability for the intended application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which will be supplied on request.