1. Operation of Breaker3 is not mention in the paper.
2. Ratings of Induction Machine is given as 200MW but PSCAD demands the value in MVA so, I set it as 300MVA 3. In WRIM (Wound Rotor Induction Machines) specifications : General Data, i. What should be the value of Base frequency 50 or 60Hz, although I have taken it as 50Hz ii. What should be the value of Angular Moment of Inertia and Mechanical Damping, so I have not made any changes in them 4. MVA/MW rating of Transformer is also not mention so, I assume it 300MVA 5. The Rating of 3phase Source is 240MW, but PSCAD demands the value in MVA so, I set it as 300MVA 6. Values of W, S, TL is not given properly. Moreover, I am also not getting their independent operations. 7. Voltage Ratings of Bus is assumed by me as 230 kV 8. Please also have a look on internal parameters of Logic Operation For Circuit Breakers