This document provides specifications for a Y-type strainer to be used on the suction of an HC flare drum drain pump on the CB offshore platform. It outlines the operating conditions, design requirements, materials of construction, testing and certification needed. Key details include that the 3" strainer will be horizontal inline, rated to 150 PSIG, constructed of WCB and 316SS, and meet NACE MR01-75 standards for sour service. Pressure drop calculations must be submitted for review.
This document provides specifications for a Y-type strainer to be used on the suction of an HC flare drum drain pump on the CB offshore platform. It outlines the operating conditions, design requirements, materials of construction, testing and certification needed. Key details include that the 3" strainer will be horizontal inline, rated to 150 PSIG, constructed of WCB and 316SS, and meet NACE MR01-75 standards for sour service. Pressure drop calculations must be submitted for review.
This document provides specifications for a Y-type strainer to be used on the suction of an HC flare drum drain pump on the CB offshore platform. It outlines the operating conditions, design requirements, materials of construction, testing and certification needed. Key details include that the 3" strainer will be horizontal inline, rated to 150 PSIG, constructed of WCB and 316SS, and meet NACE MR01-75 standards for sour service. Pressure drop calculations must be submitted for review.
This document provides specifications for a Y-type strainer to be used on the suction of an HC flare drum drain pump on the CB offshore platform. It outlines the operating conditions, design requirements, materials of construction, testing and certification needed. Key details include that the 3" strainer will be horizontal inline, rated to 150 PSIG, constructed of WCB and 316SS, and meet NACE MR01-75 standards for sour service. Pressure drop calculations must be submitted for review.
Y-TYPE STRAINER PROJECT FESX01 DATA SHEET - PIPING PLATFORM CB PLATFORM AREA D LOCATION TAG NO. ASCBZ-S-4041 MESC. NO. A IDC VVJ008 XXX XXX 21.03.2012 MANUFACTURER LI.NO REV. DESCRIPTION PREP CHK APP DATE MODEL NO. Plant Specific Data Description Specified Vendor Data 1 Ambient Temperature 0 to 50 Deg. C / 32 to 122 Deg. F 2 Humidity 100 % R.H. 3 Environment Exposed, Saliferous 4 Area Classification Zone 1, I I B, T3 Equipment Specific Data 5 Service (Location) Suction of HC (Flare Drum Drain Pump) 6 Type Y Type Strainer 7 Quantity 1 off 8 Design Pressure 150 PSIG / 10.34 BARG 9 Design Temperature Min/Max 14 to 200 Deg. F / -10 to 93 Deg. C 10 Test Pressure 338 PSIG / 15.51 BARG 11 Pipe Line Spec. AZ (MITS-2) 12 Filter Orientation Horiz./Vertical Horizontal In-Line 13 14 Design 15 Size 3" 16 Rating ASME CL150 17 Standard ASME B31.3 / Manufactures standard 18 Liquid Sour HC 19 Liquid Viscosity at Operating Temperature ----------cP 20 Liquid Density at Operating Temperature ---------kg/m3 21 Design Flow Rate ----------m³/h 22 Corrosion Allowance 6 MM (Note 2) 23 Process Connection RF Flanged 24 Hole Size MESH 10 25 Drain Connection Note 4 3/4" Flanged to ASME CL150 RF connection 26 Pressure Drop (Clean & Dirty Conditions) Note 3 VTA 27 Face to Face MM VTA 28 Material 29 Body & Flange ASTM A216 Gr. WCB / ASTM A105N 30 Strainer SS 316 ASTM A320 GR L7 Stud Bolts C/W 2 ASTM A194GR 7L, SF, HH. Nuts 31 Bolts & Nuts Hots Dip Galvanized to ASTM A153 or ISO 1461 32 Cover (Bolted Type) ASTM A105N ASME CL150 Type 316L SS SWSF, 33 Gaskets 3/16 in thick with 1/8 in thick Inner and Outer ring 34 NACE MR-01-75 / ISO15156 Yes 35 36 Non Destructive Testing Note 5 37 38 Painting MITS-34 39 40 Identification 41 Tag No Stamped or S.S. Tag wired to body 42 43 Certification 44 Pressure Retaining Parts 3.1 ACC. to EN10204 45 Pressure Test Test Certification 46 Total Supply Statement of Compliance 47 48 49 50 SKETCH NOTES: 1- Strainer Material shall comply requirement of pipe class AZ in MITS-2 2- Corrosion Allowance shall be taken care in design of Strainer. 3- Vendor shall submit Pressure Drop Calculation (Clean and Clogged conditions) for review/acceptance. 4- Fully welded 3/4" Drain to be supplied with 45 deg elbow and flange, as shown in sketch. No threaded joint is allowed. 5- 100 % Radiography of critical area as per BPV section V, Article 2. K1A