Professional Documents
Culture Documents
Phi Technology - Realtime
Phi Technology - Realtime
OHYDROI
ONI
SAT
ION
T
ECHNOL
OGY
ADVANCED
OXIDAT
ION
METHODS
PHI TECHNOLOGY
Major Advantage
PHI Cell does not need the pollutants to travel to the air handler for UV treatment or filtration.
PHI Cell is proactive and sends ionized aggressive advanced oxidizers into the room to destroy
the pollutants at the source, in the air and on surfaces, before they can reach your family, clients
or employees.
Hydroperoxides inside occupied area PHI unit on -- .01 ppm to .02 ppm
(Source: Kansas State University testing results of PHI technology, 2000 to 2012 and Katz
Analytical for RGF Environmental Group, 2010)
Now, .01 ppm may not sound like a lot, but there are approximately 177,000,000,000,000,000
hydroperoxide gas molecules in a single litre of air, which means they are close to one micron
apart. So, bacteria, odours, viruses, VOCs, mold, etc. do not have to go far to be hit with one
and destroyed. Hydroperoxide gas at levels of .01 ppm are now recognized by the EPA as an
effective infection control and microbial treatment technology.
Sneeze test
A testing protocol concept was used which included a “Sneeze simulation Machine” and
“Sneeze” chamber. A sneeze can travel up to 100 mph, therefore lung capacity, sneeze
pressure, and liquid volume had to be monitored to properly simulate a human sneeze. This
was accomplished and the test proceeded with outstanding results. An average of 78%
reduction of microbials was achieved with PHI Cell in a double-blind test, at 3 feet from the
sneeze source. This is clearly not a medically supervised test or protocol. However, from a
Specifications