Professional Documents
Culture Documents
General Purpose JFET Quad Operational Amplifier: Features
General Purpose JFET Quad Operational Amplifier: Features
Features
■ Wide common-mode (up to VCC+) and
differential voltage range N
■ Low input bias and offset current DIP14
(Plastic package)
■ Output short-circuit protection
■ High input impedance JFET input stage
■ Internal frequency compensation
■ Latch up free operation
■ High slew rate: 16V/µs (typ) D
TSSOP-14
Description (Thin shrink small outline package)
Output 1 1 14 Output 4
VCC + 4 11 VCC -
Output 2 7 8 Output 3
1 Schematic diagram
VCC
Non-inverting
input
Inverting
input
1 0 0Ω
2 0 0Ω
Output
1 0 0Ω
30k
8.2k
VCC
2/16
TL084 Absolute maximum ratings and operating conditions
3/16
Electrical characteristics TL084
3 Electrical characteristics
4/16
TL084 Electrical characteristics
Channel separation
Vo1/Vo2 120 120 dB
Av = 100
1. The input bias currents are junction leakage currents which approximately double for every 10°C increase in the junction
temperature.
5/16
Electrical characteristics TL084
30
MAXIMUM PEAK-TO-PEAK OUTPUT
RL = 10 kΩ
25
Tamb = +25˚C
20
VOLTAGE (V)
15
10
0 2 4 6 8 10 12 14 16
SUPPLY VOLTAGE ( V)
6/16
TL084 Electrical characteristics
Figure 8. Input bias current versus free air Figure 9. Large signal differential voltage
temperature amplification versus free air
temperature
100 1000
V CC = 15V 400
INPUT BIAS CURRENT (nA)
200
DIFFERENTIAL VOLTAGE
10
AMPLIFICATION (V/V)
100
1 40
20
10 V CC = 15V
0.1 V O = 10V
4
2 R L = 2k Ω
0.01 1
-50 -25 0 25 50 75 100 125 -75 -50 -25 0 25 50 75 100 125
TEMPERATURE (˚C) TEMPERATURE (˚C)
Figure 10. Large signal differential voltage Figure 11. Total power dissipation versus free
amplification and phase shift air temperature
versus frequency
250
DIFFERENTIAL VOLTAGE
180
AMPLIFICATION (V/V)
DIFFERENTIAL
VOLTAGE
200 No signal
PHASE SHIFT AMPLIFICATION No load
(right scale) 175
(left scale)
150
10 90 125
R = 2kW 100
L
C L = 100pF 75
1 V CC = 15V 0 50
T amb = +125°C 25
0
100 1K 10K 100K 1M 10M -75 -50 -25 0 25 50 75 100 125
FREQUENCY (Hz) TEMPERATURE (˚C)
Figure 12. Supply current per amplifier versus Figure 13. Supply current per amplifier versus
free air temperature supply voltage
2.0 2.0
SUPPLY CURRENT (mA)
7/16
Electrical characteristics TL084
Figure 14. Common mode rejection ratio Figure 15. Voltage follower large signal pulse
versus free air temperature response
88 4 OUTPUT
VC C = 15V INPUT
87 2
RATIO (dB)
(V)
86
VCC= 15V
85 -2 R L = 2 kW
C L= 100pF
84 -4
Tamb = +25°C
83 -6
-75 -50 -25 0 25 50 75 100 125 0 0.5 1 1.5 2 2.5 3 3.5
TEMPERATURE (˚C) TIME (ms)
Figure 16. Output voltage versus elapsed time Figure 17. Equivalent input noise voltage
versus frequency
28 70
24 VCC = 15V
60
OVERSHOOT A V = 10
EQUIVALENT INPUT NOISE
OUTPUT VOLTAGE (mV)
20 90% 50 R S = 100 Ω
VOLTAGE (nV/VHz)
16 T amb = +25˚C
40
12
30
8
V CC = 15V
20
4 R L = 2k Ω
10%
0 Tamb = +25˚C 10
tr
-4 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 10 40 100 400 1k 4k 10k 40k 100k
TIME ( μs) FREQUENCY (Hz)
1
V VCC = = 15V 15V
TOTAL HARMONIC DISTORTION
CC
0.4
A AV V= =1 1
V VO O(rms) = =6V6V
(rms)
0.1
T amb
T amb= =+25˚C
+25˚C
0.04
(%)
0.01
0.004
0.001
100 400 1k 4k 10k 40k 100k
FREQUENCY (Hz)
8/16
TL084 Typical applications
10k Ω
1k Ω
eI -
1/4
TL084 eo
RL CL = 100pF
4 Typical applications
fO = 100kHz
-
1/4
TL084 Output A
1M Ω
-
1/4 -
1μF TL084
1/4
Input TL084 Output B
100k Ω 100k Ω
100k Ω
V CC+
1OO μF -
100k Ω 1/4
TL084 Output C
9/16
Typical applications TL084
16k Ω 16k Ω
22 0p F 220 pF
43k Ω 43k Ω
43k Ω 30k Ω 43k Ω 30k Ω
Input - -
22 0p F 1/4 1/4 43k Ω
- 22 0p F -
TL 08 4 TL 08 4
43k Ω 1/4 1/4
TL 08 4 TL 08 4
Output B
1.5 k Ω 1.5 k Ω
Ground
Output A
10/16
TL084 Package information
5 Package information
A 1.2 0.047
A1 0.05 0.15 0.002 0.004 0.006
A2 0.8 1 1.05 0.031 0.039 0.041
b 0.19 0.30 0.007 0.012
c 0.09 0.20 0.004 0.0089
D 4.9 5 5.1 0.193 0.197 0.201
E 6.2 6.4 6.6 0.244 0.252 0.260
E1 4.3 4.4 4.48 0.169 0.173 0.176
e 0.65 BSC 0.0256 BSC
K 0° 8° 0° 8°
L 0.45 0.60 0.75 0.018 0.024 0.030
A A2
K L
A1 b e c E
E1
PIN 1 IDENTIFICATION
1
11/16
Package information TL084
a1 0.51 0.020
B 1.39 1.65 0.055 0.065
b 0.5 0.020
b1 0.25 0.010
D 20 0.787
E 8.5 0.335
e 2.54 0.100
e3 15.24 0.600
F 7.1 0.280
I 5.1 0.201
L 3.3 0.130
Z 1.27 2.54 0.050 0.100
12/16
TL084 Package information
A 1.75 0.068
a1 0.1 0.2 0.003 0.007
a2 1.65 0.064
b 0.35 0.46 0.013 0.018
b1 0.19 0.25 0.007 0.010
C 0.5 0.019
c1 45° (typ.)
D 8.55 8.75 0.336 0.344
E 5.8 6.2 0.228 0.244
e 1.27 0.050
e3 7.62 0.300
F 3.8 4.0 0.149 0.157
G 4.6 5.3 0.181 0.208
L 0.5 1.27 0.019 0.050
M 0.68 0.026
S 8° (max.)
13/16
Ordering information TL084
6 Ordering information
TL084MN TL084MN
TL084AMN DIP14 Tube TL084AMN
TL084BMN TL084BMN
TL084MD/MDT 084M
Tube or
TL084AMD/AMDT -55°C, +125°C SO-14 084AM
tape & reel
TL084BMD/BMDT 084BM
TL084MP/MPT Tube or 084M
TL084AMP/AMPT TSSOP14 tape & reel 084AM
TL084BMP/BMPT 084BM
TL084IN TL084IN
TL084AIN DIP14 Tube TL084AIN
TL084BIN TL084BIN
TL084ID/IDT 084I
Tube or
TL084AID/AIDT -40°C, +105°C SO-14 084AI
tape & reel
TL084BID/BIDT 084BI
TL084IP/IPT 084I
Tube or
TL084AIP/AIPT TSSOP14 084AI
tape & reel
TL084BIP/BIPT 084BI
TL084CN TL084CN
TL084ACN DIP14 Tube TL084ACN
TL084BCN TL084BCN
TL084CD/CDT 084C
Tube or
TL084ACD/ACDT 0°C, +70°C SO-14 084AC
tape & reel
TL084BCD/BCDT 084BC
TL084CP/CPT 084C
Tube or
TL084ACP/ACPT TSSOP14 084AC
tape & reel
TL084BCP/BCPT 084BC
14/16
TL084 Revision history
7 Revision history
15/16
TL084
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
16/16