Professional Documents
Culture Documents
Difference Between Continuous and Batch Process
Difference Between Continuous and Batch Process
Batch Process
For a long time, the food industry has relied on a large-scale continuous process. At the
outset, the production facilities for new products used to be a batch process produced on a
larger scale because of reduced investment costs. As the economy of scale has become a
main factor, food process industries and process engineering, in general, emphasized on
developing and designing continuous processes for mass production of goods.
However, specialty products and product diversification, with more emphasis on customer
requirements and their need for food security and high quality, as well as trace ability
requirements, mean that equal focus has shifted to batch processes. In fact, almost half of
today’s processes in the food industry are actually batch processes.
Industrial processes can actually be classified based on the process’ output as:
batch processes
continuous processes
So, what are these two and how are they different from one another?
Generally, batch is a process that results in the production of limited quantities of material
through subjecting quantities of raw materials to a set of processing activities over a
significant period of time with the use of one of more piece of equipment. Processing of
successive batches must wait until the completion of the current batch.
For majority of applications, continuous flow saves costs, energy and time. When this
process is properly implemented, it can reduce waste, improve quality by making it easier to
identify and correct errors, increase productivity and adapt to the needs of customers more
efficiently than batch processing.
When it comes to the cost of equipment, continuous process is more expensive than the
low process. However, when comparing the production rate, continuous have lower rate
than the continuous one. The shut-down times in continuous process is rare, whereas it
happens quite more often in a batch process.
If you don’t have enough manpower to perform the work, you can benefit more with a
continuous process, as it requires a fewer people than its counterpart. In terms of ease of
automation, batch process is relatively more difficult than the continuous process.
Both continuous and batch processes are vital in the production of materials or products.
Having a deeper understanding of each of them can help you make an informed decision in
the end.