Professional Documents
Culture Documents
TECHNICAL DATA SHEET-BD-004-Rev 4 PDF
TECHNICAL DATA SHEET-BD-004-Rev 4 PDF
STATUS
√ 1 Approved
Date:22.05.12
04.07.2012 Transmittal
TransmittalRef:
RefLII/11119/CPL/404/037
: LII/11041/PLL/419/827
UNIQUE INDUSTRIAL HANDLERS PVT LTD
TECHNICAL DATA SHEET FOR 85/25T TG HALL EOT CRANE
Sheet 2 of 9
UNIQUE INDUSTRIAL HANDLERS PVT LTD
2.4 Hoisting Speed – AH.
Normal m/min 5.0
Creep m/min 0.5
3.0 ACCELERATION
3.1 Cross Travel cm/sec2 7
3.2 Long Travel cm/sec2 8
3.3 Location ( Indoor / Outdoor) Indoor
3.4 Clearances and hook approaches, as Refer GA drawing no.
per tender ( if no, specify) BD/004/01/00.00 &
BD/004/02/00.00
3.5 Type of control proposed From open type cabin through
Master Controller & from floor
B through movable PB Pendant for
” A “and from open type cabin
through Master Controller &Radio
Remote Control for crane “B”
3.6 Gantry Rail Size D 105 Lbs/yd
4.0 CONSTRUCTIONAL FEATURES
4.1 Weight of complete crane unladen T 72
4.2 Weight of trolley unladen T 23.5
4.3 Weight of Bogie T 1.0
4.4 Weight of girder T 15.5 (including CT Rail)
4.5 Maximum wheel load w/o impact T 32
5.0 HOISTING SYSTEM
5.1 Rope
5.1.1 Rope diameter mm MH: 32 AH: 18
5.1.2 Rope construction 6 x 36
5.1.3 Rope quality ( material) B Steel core
5.1.4 Rope Strength Kgf/mm2 200
5.1.5 Wire Rope conforms to IS :2266
5.1.6 Breaking Strength T 72.9 23.1
5.1.7 Number of Rope falls
Sheet 3 of 9
UNIQUE INDUSTRIAL HANDLERS PVT LTD
For main hoist 8
For Auxiliary hoist 8
5.1.8 Factor of Safety 5.25
5.2 Rope Drum ( main hoist / aux. hoist)
5.2.1 Drum diameter and length mm MH: 650 dia x 4000 Long
AH: 500 dia x 3600 Long
5.2.2 Drum material Seamless Pipe ASTM‐106 Gr B or
Fabricated Fe410w to IS: 2062 Gr B
5.2.3 Whether stress relieved Yes/No Yes, if fabricated shell used.
5.2.4 Bearing type / make Antifriction Roller or Ball bearing
5.2.5 Life Hrs Min 10000
5.3 Hook ( main hoist / aux hoist)
5.3.1 Hook type MH: Ramshorn
AH: Plain Shank “C” type
5.3.2 Hook material MH: Cl 2 IS 1875
AH: Cl 2 Grade L,IS 1875
5.3.3 IS Standard for hook IS 5749 ‐MH IS 15560‐AH
5.3.4 Safety latches provided ( both main Yes /No Yes
and aux. hook)
5.3.5 Swivel lock pin ( both main and aux. Yes / No Yes
hook)
5.4 Sheaves ( main / aux. hoist)
5.4.1 Lower sheave diameter mm 710 400
Sheet 4 of 9
UNIQUE INDUSTRIAL HANDLERS PVT LTD
Sheet 5 of 9
UNIQUE INDUSTRIAL HANDLERS PVT LTD
Sheet 6 of 9
UNIQUE INDUSTRIAL HANDLERS PVT LTD
9.1 GENERAL
9.1.1 Make D KEC /CGL/ABB
9.1.2 Type SC SC SC SC
9.1.3 Number 1 1 2 1
9.1.4 Rating ( consumed kw) 46.32 34.21 3.663 3.322
9.1.5 Rating : kw at 50o C 47 39 4.6 4.6
9.1.6 Rating 40% CDF
9.1.7 Permissible Starts / hr 150 st /hr
Sheet 7 of 9
UNIQUE INDUSTRIAL HANDLERS PVT LTD
Sheet 8 of 9
UNIQUE INDUSTRIAL HANDLERS PVT LTD
on for all crane motors?
9.2.10 Detailed write up on speed control Shall be furnished along with
furnished? Electrical drawings & documents
10.0 Operator’s cabin
10.1 Master controller for all motions Provided
10.1 Cabin Size 2.5 X 2 X 2 ( clear height)
Sheet 9 of 9