Professional Documents
Culture Documents
Pile Dynamics, Inc.: Quality Assurance For Deep Foundations
Pile Dynamics, Inc.: Quality Assurance For Deep Foundations
Quality Assurance
for Deep Foundations
Driven Piles
Drilled Shafts / Bored Piles
ACIP / CFA / DD Piles
Micropiles
Helical Piles
www.pile.com
THE PDI STORY
In the mid-1960s, at what is now known as Case PDI continues to innovate the deep foundations
Western Reserve University (CWRU) in Cleveland, OH, industry through the development of quality
Professor George G. Goble became the principal assurance/quality control testing equipment and
investigator of a research project to develop new technologies. Our technologies are used worldwide
technologies of pile testing. The Ohio Department of on various types of deep foundation structures, both
Transportation and Federal Highway Administration on- and off-shore. We offer customized training in the
funded the initial study, entitled Dynamic Studies use of our equipment, as well as certified continuing
on the Bearing Capacity of Piles, which resulted in education through foundation testing workshops,
an electronic testing device displaying the bearing seminars and webinars around the world.
capacity of a pile based on fundamental stress wave
theory. During that time, as a graduate student, Dr. Today, more than ever, PDI is committed to quality,
Frank Rausche developed the Case Method and research, innovation and superior customer care.
CAPWAP® analysis. A short time later Garland Likins, Every PDI instrument includes technical support.
also a graduate student at CWRU, joined in both the Headquartered in Cleveland, Ohio, USA, PDI
software and hardware development efforts. products excel in quality, reliability, accuracy and
durability. Visit our extensive resource library at
In 1972, the trio came together to form Pile Dynamics, www.pile.com.
Inc. (PDI), a firm dedicated to developing quality
control instruments for the deep foundation industry,
most notably, the Pile Driving Analyzer® (PDA).
“We not only build pieces of equipment and perform testing, we are
actually developers of the testing methods themselves.”
• Measures the energy • Counts hammer blows and • Thermal Wire® Cables tied to
transferred into an instrumented computes blows per minute for reinforcement provide digital
SPT rod during a standard all hammer types readings up to 105 degrees
penetration test (SPT) • Calculates stroke height for Celcius
• Measures N Value to diesel hammers
help improve reliability of • Two-channel external data
soil strength estimates in • Provides a drive log of blow loggers read and store
geotechnical applications count as a function of depth temperature measurements
• Optional accessories allow for nd transfer data automically
• Employs smart sensor to the Cloud
technology, allowing the impact velocity measurements
sensor calibrations and rod to compute kinetic energy and • TEMP-Q sends email and
cross-sestional area to be depth measurements texalerts when user-defined
automatically read and parameteres are exceeded
recorded • Complies with ASTM C1074
• Multi-touch gesture and screen for estimating concrete
color scheme options for better strength by the maturity
data view method
Cross-Hole Analyzer PDI-TOMO Pile Installation
(CHAMP-Q) Recorder (PIR)
Evaluation of concrete quality 3D tomographic software for Automated monitoring
by the Crosshole Sonic Logging Crosshole Sonic Logging (CSL) equipment that assists in the
Method (CSL) installation of augered cast-
in-place (ACIP) / continuous
flight auger (CFA) and drilled
displacement (DD) piles
• Four channels (six profiles) can • Offers superior, intuitive visual • Records and displays
be pulled at once - saving time identification of damaged or accurately measured
and money questionable areas via CSL incremental group volume
• Color-coded CSL transceivers data in real time, optionally with
offer optimized speed of testing • Generates efficient and easily grout pressure or torque
and data entry comprehensive, quantitative measurements and RPM
• Performs real-time, onsite engineering analysis • Installation log results print
analysis as well as data transfer • Provides a valuable add-on immediately on a small field
to a PC with CHA-W reporting service for the testing engineer printer
software • May be installed in any type of
• Offers PDI-TOMO 3-D dedicated or general purpose
tomographic software for rig equipment
superior results of questionable • Can be used in low headroom
areas applications
Pile Driving CAPWAP® Pile Dynamics
Analyzer® (PDA-8G) Analyzer (PDA-DLT)
High strain dynamic load Signal matching software that High strain dynamic load
testing and pile driving uses force and velocity data testing for drilled shafts and
monitoring system measured by the PDA and bored piles
PDA-DLT
• Performs dynamic load tests on • Estimates total bearing • Specifically designed for drilled
most types of deep foundations capacity as well as foundations, including drilled
• Calculates bearing capacity resistance distribution along shafts, bored piles, ACIP and
and evaluates structural the shaft and at the toe CFA piles
integrity • Simulates a static load test in • Optimized for a small number
compression and tension of blows with variable hammer
• Assesses driving stresses and
hammer performance • Predicts the load drop heights
displacement behavior • Top transducer method
• Available in cabled or wireless
versions • Determines stresses at each eliminates concrete build up
depth along the pile or excavation, while improving
• Complete with CAPWAP®, accuracy and reducing labor
GRLWEAP, and iCAP® software, costs
as well as PDIPLOT to summarize
results • Field to office data transmission
available via SiteLink® Remote
Testing
Wave Equation Thermal Integrity Static Load Tester
Analysis of Pile Profiler (TIP) (SLT)
Driving (GRLWEAP)
Pile driving simulation software Next generation quality Quick and accurate monitoring
assurance to assess cast-in- of force and displacement
place concrete foundations during a static load test
Supplying QA/QC
Testing
Instrumentation
Globally