Professional Documents
Culture Documents
First Fire Protection
First Fire Protection
We offer comprehensive support for complete fire protection, testing and inspecting
detection and alarm as well as sprinkler and hydrant systems. We review documents,
perform a risk assessment and conduct on-site inventories of installed components, real
usage and general conditions. Based on measurements taken, we determine potential
improvement strategies and make any necessary changes to comply with regulatory
standards.
Risk assessment
Planning phases
Safety regulations and technical design during planning, installation and modification
Periodic testing
Reporting
We carry out all testing and inspections according to the following requirements:
On top of that, we provide you access to our one-stop-shop service and nationwide
support with no regional restrictions. Strengthen your inspection management with our
internet-based Equipment Online service. A leading provider of testing inspection,
assessment and verification services for fire detection, alarm, extinguishing and
High alert
Further we will immediately alert you, should we determine conditions, which could
cause a future malfunction in any of the firefighting systems.
Periodical inspections
By letting us take responsibility for service and maintenance, your employees are given
enough space to keep their focus in the right places. We are glad to take responsibility
for periodical inspections of high pressure air cylinders like for instance start air bottles
and breathing apparatus for life boats.
The test will be recorded, by use of “clamp on” flow meter(s), pressure transmitters and
data-logger. A detailed test report will be issued.
1. Preparation and approval of procedures, check lists, and Safe Job Analysis
2. Evaluation of existing manning plan.
3. Visual inspection of deluge system, distribution network and nozzle location. These
are checked against ISO drawings and hydraulic calculations.
4. Covering of sensitive electrical and instrumentation equipment.
5. Inspection of the function of the existing drainage system
6. Performing of the decided scenario test.
7. Testing of Fire Pumps with reference to valid pump curves.