Enterprise 5000X, 8000X: CPR Backrest Release

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

QUICK REFERENCE GUIDE - FUNCTIONS

Enterprise 5000X, 8000X


CPR backrest release

Pull the red CPR handle located on either side of the bed to quickly lower the backrest.

Side rails - Raising


Do not leave the side rails in the raised position Make sure the side rail is securely
if the locking bolt is visible behind the blue locked when in raised position.
operating knob.

Hold the side rail. Pull the side rail up until it locks in the raised position.

Side rails - Lowering

Hold the side rail. Pull blue operating knob or blue release lever and lower the side rail.

08.EN.01EN_1 • 05/2020 • Page 1/2


Brakes and steering

Brake Free Steer


Brakes applied on all four castors. All four castors are free to rotate All four castors can rotate,
and swivel. steering castor cannot swivel.

The brakes should be applied at all times when the bed is stationary.

Bed length adjustment (three set positions)


1 2
B

B C

Pull the blue extension locking handle (A). Pull out Lift the blue extension catch bar (A) and hold the
the bed frame (B) to required position and release middle of the crossbar (B), then pull the mattress
handle. platform to position (C).

Calf section adjustment


1 2

Hold side of the calf section frame and lift the calf Lift until it latches in the horizontal position.
section upwards.

ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com 08.EN.01EN_1 • 05/2020 • Page 2/2

You might also like