Professional Documents
Culture Documents
2017 Catalog WEB
2017 Catalog WEB
S A R Y
IV ER
AN N
20th
team wendy ®
Who is
Wendy ?
Team Wendy was founded in 1997 by Dan T. Moore as a memorial
to his daughter Wendy, who passed away from a traumatic brain
injury (TBI) following a snow skiing accident. The company initially
focused on manufacturing and selling ski helmets before transi-
tioning to designing and developing products for the military, law
enforcement and search and rescue communities.
Photographed by
Oakley Standard Issue
Dan Moore and his daughter Wendy
HISTORY AT A GLANCE
research
est. 1997 Team Wendy is committed to improving personal
protection through research collaboration as well as
1997 1998
product design. We believe that advancements in
understanding of injury mechanisms are critical to the
development of protective equipment. Since our in-
ception we have been active in the helmet committee
of ASTM international. We have led studies that build
Tea m Wen d y is f o u n d ed by D a n T. M o o re a s
T h e f i r s t h e l m e t , a s k i h el m et , i s l aunc hed t o understanding of head protection from rotational
a memo r ia l to h is d a u gh ter Wen dy w h o
pro t e ct o t h e r s i n h o n o r of Wend y Moore. impacts and blast pressure waves. We have received
tra gic a lly p a ssed a w a y f o llo w in g a s n o w s k i i n g
funding from the U.S. Army to explore the limits of
acc id en t.
impact mitigating material technology in helmets,
as well as from USSOCOM for the development of
novel padding systems to protect against behind
2005 2009 2011 helmet trauma caused by ballistic impacts. We are
also partnering with Brown University in a multiyear
The Zorbiu m ™ Ac tio n Pa d Th e E P IC ™ H e l m e t L i n e r Te a m We nd y c ont i nues t o research effort to apply advanced cellular models for
(ZA P ™ ) sy stem is relea sed . s ys t e m re pre s e n t s a dr i v e i n n ov at i on wi t h t he fi rst brain injury prediction and improve the optimization of
To date mo re th a n 6 millio n re v o l u t i o n i n h e l m e t i t e r a t i o n of t he Rev ol v e ™ Hel - helmets against a spectrum of injuries.
ZA P ™ sy stems h a ve been pa d pro t e ct i o n , m e t L i n e r S yst em , whi c h ut i -
2012 2013 Rather than being solely reliant on off-the-shelf In addition to developing new material technologies, Team Wendy has a long track record of supplying
technology, our Product Development and in-house we strongly focus on product design to provide the quality products and exceeding the delivery schedules
polymer chemistry team actively develop new best experience to the end user, including helmet of our customers. We can deliver on the most de-
material solutions. This unique approach, and the comfort, fit, and functionality. Our design teams rely manding requirements, but remain highly responsive
The rele a se o f th e E XFI L ® C a r bo n ma r k s Te a m resulting advancements, set Team Wendy apart from on advanced computer drafting and 3D printing tech- to evolving customer needs. Quality Assurance test
T h e E X F IL ® LT P ( L i g h t Tac t i c al P ol ym er)
Wendy's retu r n to th e p ro d u c tio n o f c o m pl e t e other protective equipment companies. Our patented nologies. We use on-site manufacturing and testing facilities are on-site. We provide extensive technical
b u m p h e l m e t i s re l e a s ed .
helmet sy stems. polyurethane Zorbium® foam is built into the only facilities to prove out concepts. Our deep experience expertise and product support. Nearly all of our prod-
authorized helmet pads for the United States Army in the head protection industry drives the success of ucts are made at our facility in Cleveland, OH. We are
and U.S. Marine Corps since 2005. The Zorbium® our products. The REVOLVE™ helmet liner leverages certified to ISO-9001 with design.
padding system performed so well in blunt impact our material technology to provide market leading
2014 2015 tests against the legacy system that the U.S. Army
was able to revise combat helmet requirements
protection against high-energy blunt impacts. The
M-216™ Ski Search and Rescue helmet and EXFIL®
to capture the increase in protection. Our material SAR are the only helmets in their respective markets
innovation continues today through the development that provide interfaces for tactical accessories. We
of modular helmet padding systems, crushable also partner with leading brands to leverage their
Team Wen d y 's f ir st ba llistic h elmet, the E X F IL ® T h e E X F IL ® S A R i s re l e ased . It i s t he fi rst thermoplastic structures, novel padding systems for expertise and provide the ultimate product functional-
Ballisti c , f ea tu res th e bo ltless C AM FI T ™ re t e n t i o n pu r po s e b u i l t S e a rch a nd Resc ue hel m et t o the reduction of ballistic trauma, and more. ity, such as Wilcox® Industries NVG interfaces and
system a n d a h y br id c o mp o site sh ell. pro v i de t a ct i ca l m o u n t ing c ap abi l i t i es. integrated Princeton Tec® task lights for the M-216™
Ski Search and Rescue helmet. All helmets also
feature a conformal headband fit system patented
by Team Wendy, using industry leading components
2017 from Boa® Technology.
H E LM E T S 4
EX F I L ® B ALL I S T I C 6
EX F I L ® CAR B O N 8
EX F I L ®
LTP 10
EX F I L ® S AR TACT I CAL 12
EX F I L ®
S AR B AC K COU N TR Y 14
M 2 1 6 ™ S K I S e a r c h & Res c u e 16
ACC E S S OR I E S 1 8
lINER SYSTEMS 34
R E T E N T I O N sys t e m s 42
Te a m W en d y ®
1 7 0 0 0 S t. C l a i r Ave . B l d g 1
co n t e n ts
C l eve l a n d , OH 4 4 1 1 0
216.738.2518
in f o @ t e a m wen d y. c o m
M-216™ Ski Search & Rescue
Photographed by Richard King www. t e a m wen d y. c o m
MIL I TARY LA W E N FORCE ME NT SE ARCH AND RE SCU E ADVENTURE
WHO WE SERVE
h elmets ⁄ ⁄ 4
COMFORTABLE.
LIGHTWEIGHT.
PROTECTIVE.
› E X F I L ® B ALL I S T I C
› E X F I L ® CAR B O N
› E X F I L ® LTP
› E X F I L ® S AR
› M - 2 1 6 ™ S K I S E ARCH & R E S CU E
EXFIL® CARBON
Photographed by Richard
King Photography
h elm ets
h elmets ⁄ ⁄ 6
»helmets
EX F I L B a l l i s t i c
®
The EXFIL® Ballistic features a hybrid composite shell with unique geometry for
increased strength and optimal fit. An innovative, boltless CAM FIT™ retention LIGHTWEIGHT HYBRID COMPOSITE SHELL
quickly adjusts to individual head shapes, providing a comfortable and stable • Unique EXFIL® geometry adds strength while
fit. A Zorbium® foam liner protects against impact and allows for an overhead maintaining optimal fit and balance
communications headband. Customizable comfort is achieved through a set
of moveable comfort pads. The EXFIL® rail 2.0 accessory mounting system is Rail 2.0 Accessory Mounting System
compatible with all EXFIL® accessories and features T-slots for custom mounting. • Compatible with all EXFIL® accessories
A lanyard compatible Wilcox® shroud secures any standard NVG mount. (see Accessories section for details)
• Includes two MAGPUL MOE® picatinny style rails
key features XL
M
• Removable center pad to easily accommodate overhead comms
S
• Rear webbing slot for counterweight and goggle strap retainer COLORS AVAILABLE:
51 1/2 53 54 1/2 56 57 1/2 59 60 1/2 62 63 1/2
• External loop for mounting counterweights, beacon lights and ID patches
HEAD CIRCUMFERENCE (cm)
• Available with a left eye dominant CAM FIT™ retention system EXFIL BALLISTIC ACH/ MICH
»helmets
EX F I L c a rb o n
®
The EXFIL® Carbon is made of lightweight carbon fiber and offers the user a HIGH-STRENGTH AND LIGHTWEIGHT
choice of pre-installed liner systems - Revolve™ TPU Liner or a Zorbium® foam CARBON FIBER SHELL
liner. The helmet features a Wilcox® W shroud for night vision mounts, a Boa® • High-cut shell design with clearance for hearing
Closure System with cam-lock sliders for a secure fit and is compatible with protection and communication headsets
tactical communication headsets. The EXFIL® rail 2.0 accessory mounting
system is compatible with all EXFIL® accessories and features T-slots for custom
mounting.
Rail 2.0 Accessory Mounting System
Performance • Compatible with all EXFIL® accessories
• EXFIL® Carbon with Revolve™ TPU Liner: Exceeds current ACH Blunt (see Accessories section for details)
Impact Protection requirements (per AR/PD 10-02) - average below 72G across • Includes two MAGPUL MOE® picatinny style rails
all impacts and temperatures and mounting hardware
• Includes shock cord kit for stabilizing NVG
• EXFIL® Carbon with zorbium ® foam Liner: Meets the requirements of
• T-slots provide limitless custom mounting potential
EN1385:2012 standard for whitewater helmets
• This liner utilizes the same Zorbium® foam that has been proven in the standard
ACH ZAP™ 7-pad system, packaged into a 3-piece impact liner with removable Coyote Black MultiCam®
MADE IN USA
Brown
center channel to better accommodate overhead communication headbands, and
a series of adjustable comfort pads using an antimicrobial wicking fabric.
Exfil® Carbon with TPU HYBRID Liner Exfil® Carbon with Zorbium® Foam Liner
h elmets ⁄ ⁄ 10
»helmets
EX F I L lt p
®
The EXFIL® LTP (Lightweight, Tactical, Polymer) bump helmet offers a stable,
comfortable platform for mounting night vision and other accessories while
providing the highest level of impact protection. The built-in NVG shroud utilizes
an integrated Wilcox® machined aluminum shroud insert. The helmet features a HIGH-STRENGTH LEXAN
Zorbium® foam liner along with a CAM FIT™ retention system that uses easily POLYCARBONATE COPOLYMER SHELL
adjustable cam-lock sliders and a micro-adjustable Boa® dial. • High-cut shell design with clearance for hearing
protection and communication headsets
Performance
Independently tested to meet all performance requirements of EN 1385:2012
Standard for whitewater helmets
Weight
Size 1 Size 2
Rail 2.0 Accessory Mounting System
Complete System Weight 1.60 lbs (0.725kg) 1.59 lbs (0.72kg) • Compatible with all EXFIL® accessories
Complete system weight includes helmet shell, shroud, accessory rails, impact liner and retention system (see Accessories section for details)
• Includes two MAGPUL MOE® picatinny style rails
key features and mounting hardware
• Zorbium® foam liner with customizable comfort pads • Includes shock cord kit for stabilizing NVG
• T-slots provide limitless custom mounting
• Rear bungee for securing goggle straps
potential
• External loop for mounting counterweights, beacon lights and ID patches
• Helmet comfort pad replacement kits are available, sold separately
sizing
COLORS AVAILABLE:
Size 1 Size 2
MADE IN USA
Hat Size (USA) 6 7/8 – 7 1/2 up to 7 3/4
h elmets ⁄ ⁄ 12
»helmets
EX F I L s a r t a c t i c a l
®
The EXFIL® SAR is the first purpose built Search and Rescue helmet to provide
tactical accessory mounting capabilities, including a standard NVG shroud, while
meeting key industrial and mountaineering performance standards. The EXFIL®
SAR Tactical is optimized for use with night vision devices; it features a machined
aluminum Wilcox® NVG shroud insert. The helmet also includes a 4-point CAM FIT™
retention system with chin cup for optimal stability and a Boa® Closure System to High strength Lexan polycarbonate
dial in precise fit adjustment while providing single-handed quick release. copolymer shell
• High-cut shell design with clearance for hearing
Performance protection and communications headsets
• Specifically engineered for extremely low
• Meets the requirements of EN12492:2012 Standard for Mountaineering Helmets
temperature impact strength
• Meets the requirements of EN1385:2012 Standard for Whitewater Helmets
• Meets Advanced Combat Helmet blunt impact requirements
(per AR/PD 10-02 Rev A)
SAR RAIL Accessory MOUNTING System
• Meets additional off-crown impact requirements of EN 14052:2012 European • Compatible with various EXFIL® accessories
standard for high performance industrial helmets (see Accessories section for details)
NOTE: EN 14052 requires a low-strength chinstrap; the EXFIL® SAR Tactical is not fully certified to EN14052 in • Includes two MAGPUL MOE® picatinny style rails and
order to meet more rigorous chinstrap requirements of EN12492 and reduce the risk of losing the helmet mounting hardware
during a fall.
Weight
Single Size
»helmets
EX F I L s a r b a c k c o u n t r y
®
The EXFIL® SAR Backcountry is the first purpose built Search and Rescue helmet
to provide accessory mounting capabilities, while meeting key industrial and
mountaineering performance standards. The EXFIL® SAR Backcountry was
designed for users that do not intend on mounting night vision devices to
their helmet.
Single Size
key features
• Boa® Closure System integrated directly into helmet liner for optimized stability Sport-style retention system
• Optional SAR Accessory Rail system that includes Magpul MOE® Picatinny rails • Fidlock® magnetic buckle for easy
Glass-reinforced polycarbonate shroud
and features a pass-through for securing headlamps or goggle straps one-handed operation
• For mounting lights or cameras
» Compatible with various EXFIL® accessories (see Accessories section (not intended for night vision devices)
for details)
• Two removable crown vent covers included sizing
• Helmet comfort pad replacement kits are available, sold separately COLORS AVAILABLE:
Single Size
»helmets
The M-216™ is a purpose built scalable ski helmet that provides mounting capabili- ADJUSTABLE VENTS
ties not previously available to rescue operators in any ski or snow rated helmet. The • Adjustable Vents Allow for Ventilation
helmet's form and function follows a design approach originally developed for military
and tactical communities.
Weight
Small/Medium Large Extra Large
Complete System
Weight: 1.28 lbs (0.58kg) 1.34 lbs (0.61kg) 1.41 lbs (0.64kg)
EXFIL® CARBON
Photographed by Richard
King Photography
ACCESSO R I ES
A CCE S S O R I E S ⁄ ⁄ 20
• Works with all Peltor™ COMTAC systems • Works with all Peltor™ COMTAC systems • Designed for use with Team Wendy’s EXFIL® Ballistic helmet • Designed for use with Team Wendy’s EXFIL® Carbon and LTP helmets
• Eliminates rigid metal headband, providing better fitment and comfort • Eliminates rigid metal headband, providing better fitment • Material: Nylon mesh (Multicam® is polyester) • Material: Nylon mesh (Multicam® is polyester)
• 2 thumbscrew attachment allows system to be easily adjusted while and comfort • Easy installation and removal via hook/loop attachment allows rapid change • Easy installation and removal via hook/loop attachment allows rapid
remaining secure with universal hardware • Tool free attachment directly to the quick release slot on of helmet pattern, no tools required change of helmet pattern, no tools required
• Open and closed positions allow quick donning and doffing of helmet EXFIL® Rail 2.0 Accessory Mounting System • Close fitting cover creates a secure fit to the shell that also protects
• Close fitting cover creates a secure fit to the shell that also protects the
• Wiring is easily routed in or outside the helmet shell • Open and closed positions allow quick donning and doff- the helmet finish
helmet finish
• Replacement hardware is available, sold separately ing of helmet • Loop patches on the cover attach gear or patches to the outside of the • Loop patches on the cover attach gear or patches to the outside of
• Wiring is easily routed in or outside the helmet shell helmet the helmet
• Available in two sizes • Mesh allows air flow through the helmet vents
• Single size
Compatible With: BALLISTIC, LTP, CARBON Compatible With: BALLISTIC, LTP, CARBON, Compatible With: BALLISTIC Compatible With: LTP, CARBON
SAR TACTICAL, SAR BACKCOUNTRY (with rails)
A CCE S S O R I E S ⁄ ⁄ 22
rail 2.0 accessory kit picatinny quick oxygen mask Shock cord kit
release adapter strap kit
kit Includes: • Provides a tool-free attachment method for headborne • Snaps into Team Wendy Exfil® Helmet Rail 2.0 Accessory • Easily slides into the upper T-slot of the EXFIL® Ballistic, Carbon and
(2) GOGGLE POSTS (2) MINI-TINNY accessories Mounting System LTP helmets – allowing quick and easy attachment and removal
• Provides more secure, more consistent goggle • 2-slot Picatinny rail provides an alternate • Quickly attach/detach mounted accessories from the • Compatible with Airborne Systems PHAOS and SOLR™ and • Shock Cord Kit provides additional stability to night vision devices
placement than use of Velcro® type hook and mounting point for lights and other small rail system Cobham PHANTOM™ O2 masks • Length is adjusted by simply knotting at the desired size
loop strapping accessories • Includes 5-Slot NAR/MIL-STD-1913 mounting rails, • Snapdragon quick release buckle on right strap kit Includes:
• Frees up loop placement on back of helmet for • Ideal when your setup utilizes full-time or use as a base for other accessories • Team Wendy cam-lock sliders for strap adjustment and posi- » (2) loosely-tied shock cords
counterweights, as alternative to hook and loop Peltor™ Adapters that take up real estate kit Includes: tion lock » (4) non-marring plastic hooks
straps on the rail » (2) Quick Release Adapters • Mount options: direct to mask or utilize OEM front straps » (4) harsh-environment zip ties
• Goggle post installs securely in seconds - func- • Mounts securely to sideburn area of Rail » (2) removable 5-Slot NAR/MIL-STD-1913 Picatinny
tions as a thumbscrew, also features a slotted 2.0 with included stainless steel 4-40 rails pre-installed
stainless steel fastener fasteners and wrench
• Fully compatible with Smith Optics ELITE® quick
straps (Boogie Regulator, OTW, and LOPRO)
COLORS AVAILABLE:
Coyote Black
Brown
Compatible With: BALLISTIC, LTP, CARBON Compatible With: BALLISTIC, LTP, CARBON, Compatible With: BALLISTIC, LTP, CARBON Compatible With: BALLISTIC, LTP, CARBON
SAR TACTICAL, SAR BACKCOUNTRY (with rails),
M-216™ SKI
A CCE S S O R I E S ⁄ ⁄ 24
• Adds weight to the rear of the helmet to compensate for night vision and other front
mounted devices, improving stability and reducing neck fatigue
sizing • Provides protection from fragmentation, impact, liquid splash and other
debris
• Extends ballistic coverage to greater than full cut ACH
• Size 1 EXFIL Ballistic with Ears: total coverage area of 180in2
• Includes fully coated lead weights Size We i g h t • Locks into 3 vertical positions (down, up, stowed back) along with for- compared to 168in2 for ACH Medium and 179in2 for ACH Large
• Attaches with hook/loop and is additionally secured to side rails ward (vented) and back (closed) configuration when in down position • Quick and easy tool free installation and removal
Kit includes: Small .75 lbs (includes three 0.25 lb weights) • Rail mounting system allows the use of the shroud for mounting Night • Installs into lower portion of the accessory rail, maintaining ability
» (3) counterweights in either small size (1/4 lb weights) or large size (1/2 lb weights) Large 1.5 lbs (includes three 0.5 lb weights) Vision Devices without the need to remove visor from helmet to mount picatinny rails and use t-slots
» (1) shock cord strap (EXFIL® SAR Helmet) • Maintains use of other side mounting options such as communications
• One size fits all EXFIL® Ballistic helmets
headset adapters and quick release picatinny rails
» (1) webbing strap (EXFIL® Ballistic helmet)
• Low profile design provides excellent coverage at a low weight, compat-
COLORS AVAILABLE: ible with common spectacles
• Easy tool free installation and removal, one handed operation
• Replaceable lens
• Seamless integration with future ballistic mandible
Coyote
Brown
Black
• Compatible with Ballistic Ear Covers
Compatible With: BALLISTIC, LTP, CARBON, SAR TACTICAL, Compatible With: BALLISTIC Compatible With: BALLISTIC
SAR BACKCOUNTRY (with rails)
A CCE S S O R I E S ⁄ ⁄ 26
Exfil ® SAR
ess pivot™ team wendy Exfil® SAR visor BACKCOUNTRY
rail mount transit pack
by mystery ranch RAIL KIT
• ESS Pivot™ Rail Mount allows the mounting of any Eye Safety Systems • Durable design with padding on all sides to protect helmet The SAR visor quickly and easily installs to the SAR Accessory Mounting The EXFIL® SAR Backcountry Rail Kit is available to customers
Pivot goggle (including the Profile Pivot™ and Influx Pivot™) directly to • Offers three ways to carry your bag: System to protect you from impact, debris, water, and wind. The visor who initially purchased the SAR Backcountry helmet without rails
the EXFIL® Ballistic, Carbon, or LTP - Shoulder straps positively locks into up and down positions, features anti-scratch coat- and would like to add the rails.
• Mounts quickly and tool-free to helmet rail t-slots using an integrated - Bag handle on top and side for hand-carry (can also be used to ing inside and out, and is rated to both EN 166-2B and ANSI Z87.1 to
thumbscrew secure to vehicle) ensure optical clarity and impact resistance. KIT INCLUDES:
• Kit includes set of two mounts - MOLLE on back of bag that can be attached to MOLLE panels (2) siderails (1 left, 1 right)
on packs or elsewhere (2) MAGPUL MOE® picatinny style rails and mounting hardware
• Clamshell opening gives access to the entire contents and creates
two useable surfaces for kit layout
- Interior flap has Velcro for spare patches and loop mounted
accessories
• Three modular internal pockets that can be placed anywhere in
the bag
- Two flat pockets for accessory items such as strobes, goggles,
glasses, etc.
- One draw cord bag for NVGs or headset, stored under the helmet
COLORS AVAILABLE:
Coyote MultiCam®
Brown
Compatible With: BALLISTIC, LTP, CARBON Compatible With: BALLISTIC, LTP, CARBON, SAR Compatible With: SAR TACTICAL, SAR BACK- Compatible With: SAR BACKCOUNTRY
TACTICAL, SAR BACKCOUNTRY, M-216™ SKI COUNTRY (with rails)
A CCE S S O R I E S ⁄ ⁄ 28
• Enchances visibility using reflective tape and patches • Securely attach a GoPro® using the front shroud interface on any The EOS II is designed and constructed to meet the most rigorous of • Form fitting design with stretch fabric that covers the head,
• Uses genuine 3M™ SOLAS (Safety Of Life At Sea) tape that is Team Wendy helmet demands both in application, environment and is intrinsically safe. The face and neck
U.S. Coast Guard approved • Attaches and releases with the push of a button head unit is self-contained, waterproof, and constructed of high grade • Optimized for use while wearing a helmet with a thin moisture-wicking
• Included side and top Velcro® loop patches can also be used materials. The technology inside offers the best in long burn times and fabric that will not impact helmet sizing
• Compatible with all GoPro® cameras
for attaching ID badges and strobe devices utilizes advanced circuitry that regulates the output providing superior • Fleece insulating fabric provides warmth around the face and neck
(S&S Precision Manta Strobe and CORE Survival HEL-STAR 6®) and constant brightness on its two modes. The Maxbright LED puts • Split design to allow face portion to be pulled down around the neck
KIT INCLUDES: out 105 Lumens and a spot beam that reaches as far as 65 meters.
• Mesh panel at the mouth improves ventilation
(1) Front Brim Tape Strip (1) Beacon Loop Patch The EOS II is powered by 3 AAA batteries allowing for a compact foot-
(1) Back Brim Tape Strip (1) Right Loop Patch print, and includes NVG shroud mounting assembly , MOLLE webbing
(2) Top Tape Strips (1) Left Loop Patch adapter, and a nylon strap for use as a standard headlamp.
(1) Back Tape Strip
COLORS AVAILABLE:
US Coast Black
Guard
Orange
COLORS AVAILABLE:
Black
Compatible With: SAR TACTICAL, SAR BACKCOUNTRY Compatible With: BALLISTIC, LTP, CARBON, SAR TACTICAL, Compatible With: BALLISTIC, LTP, CARBON, SAR TACTICAL, SAR Compatible With: Ballistic, LTP, Carbon, SAR Tactical,
SAR BACKCOUNTRY, M-216™ SKI BACKCOUNTRY, M-216™ SKI SAR Backcountry, M-216™ SKI
A CCE S S O R I E S ⁄ ⁄ 30
The SAR ESS® goggle posts provide a direct mount of any The EXFIL® SAR Helmet Comfort Pad Replacement Kit includes a set • The Princeton Tec® Charge Adapter mounts the Princeton Tec® This kit can be used to replace the comfort pads in the LTP or the
ESS® goggle equipped with the Eye Safety Systems Profile of 3 thin pads and a set of 3 thick pads. All pads feature patented Charge MPLS Helmet Light onto Team Wendy EXFIL® helmet rails Carbon helmet with the Zorbium® liner. This Helmet Comfort Pad Kit
Pivot mount. This provides optimal geometry for a perfect fit Zorbium® comfort foam. Thin and thick pads sealed with anti-microbial • This mount ensures the Charge MPLS remains a low profile comes in one size and includes 6 pads in various shapes that are
without discomfort, and no loose straps to slip on the helmet. wicking fabric helmet light sealed with anti-microbial wicking fabric. All pads feature patented
Goggles are easily stowed on the front or rear of the helmet, • The Charge MPLS combines a powerful spot beam and low profile Zorbium® comfort foam.
and full capabilities of the SAR Accessory Mounting System are color or IR flood task lighting into one compact unit
maintained. The ESS® goggle posts are only available as a pre- COLORS AVAILABLE: COLORS AVAILABLE:
installed option on SAR helmets.
COLORS AVAILABLE:
US Coast Black Black
Guard
Orange
Tan Black OD
Available On: SAR Tactical, SAR Backcountry Compatible With: SAR Tactical, SAR Backcountry Compatible With: BALLISTIC, LTP, CARBON Compatible with: CARBON, LTP
A CCE S S O R I E S ⁄ ⁄ 32
exfil ® ballistic
helmet comfort pad ESAPI non ballistiC TRAINING PLATES
replacement kit
This kit can be used to replace the comfort pads in the Ballistic
helmet. This helmet comfort pad kit includes a total of 20 Team Wendy’s Non-Ballistic Training Plates allow you to
ballistic helmet pads; 8 thin, 8 thick and 4 compression molded train like you fight without damage to life-saving ballistic
ellipse pads. All pads feature patented Zorbium® comfort body armor. The training plates are made from virtually
foam. Thin and thick pads sealed with anti-microbial wicking indestructible, density-modifiable, cross-linked polyure-
fabric. Molded ellipse pads offer improved grip for added thane that will not crack or break when hit, dropped
helmet stability or impacted. Designed to replicate the weight, shape,
curvature and thickness of actual ballistic plates, they
are stiff enough to hold their shape, yet flexible enough
to easily insert into any carrier.
COLORS AVAILABLE:
The chest plates measure 8.75” x 11.75,” weigh 5 lbs,
and have a multi-curve shape. Chest plates come in
pairs of two.
Black
COLORS AVAILABLE:
Blue
EXFIL® CARBON
Photographed by Hurricane
Media
›EPIC AIR™
›EPIC™
› ZAP ™
› R E V OL V E ™
h elm et l i n e r
systems
L I N E R S Y S TE M S ⁄ ⁄ 36
performance performance
Exceeds the ACH blunt impact requirements (AR/PD 10-02)* Meets and exceeds the ACH blunt impact requirements (AR/PD 10-02)*
(Performance is based on testing in ACH shells. Results may vary by shell type and manufacturer.) (Performance is based on testing in ACH shells. Results may vary by shell type and manufacturer.)
*Although Team Wendy's EPIC Air™ Combat Helmet Liner System exceeds blunt impact protection require- *Although Team Wendy's EPIC™ Combat Helmet Liner System exceeds blunt impact protection require-
ments of the Advanced Combat Helmet (AR/PD 10-02), the system is not currently authorized through first
ments of the Advanced Combat Helmet (AR/PD 10-02), the system is not currently authorized through first
article testing for use in U.S. Military Advanced Combat Helmets or U.S. Marine Lightweight Helmets.
article testing for use in U.S. Military Advanced Combat Helmets or U.S. Marine Lightweight Helmets.
**Comfort pad replacement systems are available, sold separately
**Comfort pad replacement systems are available, sold separately
SIZING SIZING
• Medium/Large, and XL
Small, Medium/ Large, and XL
MADE IN USA
L I N E R S Y S TE M S ⁄ ⁄ 38
The ZAP™ NSN System is the standard system authorized for all U.S. ground The ZAP™ SOF System is designed to accommodate communication
combat helmets. headset integration within ground combat helmets.
Team Wendy's Zorbium® Action Pad (ZAP™) System is the only pad system kit includes:
approved for use in ground combat helmets (ACH, LWH, MICH, ECH) worn by • 8 -ZAP™ pads, 3/4 inch thick
members of the United States Army, the United States Marine Corps, and the • 2-trapezoid pads (NSN 8470-01-546-9407)
United States Navy. • 6-oblong pads (NSN 8470-01-546-9356)
*Also available in 1 inch pads
kit includes:
• 7-ZAP™ pads – 3/4 inch thick
• 1-circular crown pad (NSN 8470-01-546-9415)
• 2-trapezoid pads (NSN 8470-01-546-9407)
• 4-oblong pads (NSN 8470-01-546-9356)
COLORS AVAILABLE:
*Also available in 1 inch pads
Foliage
Green
COLORS AVAILABLE:
zap™ airborne pad
Foliage The ZAP™ Airborne Pad is designed to be worn in addition to other ZAP™
Green
sets and is placed at the nape of the helmet during airborne operations.
COLORS AVAILABLE:
Foliage
Green
MADE IN USA
L I N E R S Y S TE M S ⁄ ⁄ 40
Zorbium® foam sealed in a water-tight barrier and encased with milspec outer
wicking fabric. The system installs into standard ballistic helmets with hook Construction Dual-layer Zorbium® foam, milspec ®
Zorbium impact layer and comfort Zorbium® impact and comfort foams, Thermoplastic urethane (TPU)
Materials moisture wicking fabric (head-side) foams, milspec moisture wicking milspec moisture wicking and loop impact structures, Zorbium ®
and loop attachment (Velcro® brand hook disks not included). REVOLVE™ is and laminated loop attachment and loop fabric with antimicrobial fabric with antimicrobial comfort foam and milspec wicking fabric
protected by US Patent No. 9320311 and D683079. fabric (shell-side) comfort pads pads comfort pads
performance
Head Circumference (in) Head Circumference (in) Head Circumference (in) Head Circumference (in)
Headsize & Up to 22.5“ ACH Medium Up to 22.5“ ACH Medium Up to 22.5“ ACH Medium Up to 22“ ACH Medium
Corresponding 22.5” - 23.5” ACH Large 22.5” - 23.5” ACH Large 22.5” - 23.5” ACH Large 22” - 23” ACH Large
Blunt Impact Performance ACH Shell Size Over 23.5” ACH X-Large Over 23.5” ACH X-Large Over 23.5” ACH X-Large 23”-24“ ACH X-Large
• REVOLVE™ meets and exceeds the latest ACH blunt impact requirements Over 24” ACH XXL
(AR/PD 10-02 Rev A, 08 May 2012)**
• Multiple impacts across all temperatures (14°F to 130°F) result in average Sizing Notes Corresponds to standard issue More sizing flexibility is provided More sizing flexibility is provided The performance of this system
ACH, MICH, LWH, and ECH sizing through comfort pad selection, through comfort pad selection, REQUIRES a minimum 1/2” shell
head acceleration under 100G @ 10ft/sec, and under 180G @ 14ft/sec therefore those at the border therefore those at the border standoff from the head
(Performance is based on testing on ACH shells. Results may vary by shell type and manufacturer.) between sizes may be able to go between sizes may be able to go (a common recommendation for
*The performance capabilities of this system REQUIRE a minimum 1/2” shell standoff from the head. up or down a size compared to up or down a size compared to both blunt impact and ballistic
standard ZAP™ standard ZAP™ protection)
This is the common minimum standoff recommended for both blunt impact and ballistic protection in
most ballistic helmets.
**Although Team Wendy’s REVOLVE™ Combat Helmet Liner System exceeds blunt impact protection re-
quirements of the Advanced Combat Helmet (AR/PD 10-02), the system is not currently authorized through
first article testing for use in U.S. Military Advanced Combat Helmets or U.S. Marine Lightweight Helmets. Installation Hook and Loop Hook and Loop Hook and Loop Hook and Loop
Black
MADE IN USA
H E L M E T R E TE N TI O N S Y S TE M S ⁄ ⁄ 42
› CAM F I T ™
› CAM F I T ™ H - B AC K
› S TA N DARD CH I N S TRAP
› CH I N S TRAP E X T E N D E R
EXFIL® BALLISTIC
Photographed by WODHAWK
Photography
Helmet
retention
systems
H E L M E T R E TE N TI O N S Y S TE M S ⁄ ⁄ 44
The CAM FIT™ retention system utilizes cam-lock sliders for one-handed adjust- The CAM FIT™ H Back retention system utilizes cam-lock sliders for one-handed
ment and secure fit. The Boa® Closure System stabilizes the weight of the helmet adjustment and secure fit. The adjustment straps and chin-cup have been de-
by distributing a light, even pressure around the head, similar in feel to a baseball signed for a close, comfortable fit to the wearer’s face. The asymmetric design
cap. The adjustment straps and chin-cup have been designed for a close, keeps the buckle tucked smoothly along the jaw line while maintaining a snug,
comfortable fit to the wearer’s face. The asymmetric design keeps the buckle even feel around the chin-cup. The ultra-suede chin-cup lining ensures maximum
tucked smoothly along the jaw line while maintaining a snug, even feel around the comfort and chafe-free wear at any temperature.
chin-cup. The chin-cup lining ensures maximum comfort and chafe-free wear at
any temperature.
* Left-eye dominant option available
performance
Compliant with ACH and ECH Static Pull Strength requirements
* Independently tested in accordance to GL-PD-07-19 – 2007 Section 3.5.2.1, Static Pull Strength and
performance DRAFT-ECH-ICEPG16-0001 – 2009 Section 3.6.3 Static Pull Strength
Size F a c e C i rc u m f e re n c e
Size F a c e C i rc u m f e re n c e
M / L 26–29" (this size fits most ACH M/L and some XL wearers)
M / L 26–29" (this size fits most ACH M/ L and some XL wearers) XL 27 1/2–32 1/2"
XL 27 1/2–32 1/2"
COLORS AVAILABLE:
COLORS AVAILABLE:
Constructed of 5/8" inch nylon Constructed of 5/8" inch nylon Constructed of 5/8" inch nylon
webbing. Chin-cup lining ensures a webbing. Chin-cup lining ensures a webbing with wicking fabric lining.
Chin Cup
chinstrap extender maximum comfort and chafe-free
wear at any temperature.
maximum comfort and chafe-free
wear at any temperature.
The chinstrap extender is commonly used by operators who need to extend the
length of their chinstrap to accommodate a gas mask. It extends the chinstrap
Available in Yes No No
by 4” and is compatible with Team Wendy’s CAM FIT™ Retention System and
Left Eye
the CAM FIT™ H-Back Retention System but not compatible with the Standard Dominant?
Chinstrap.
ACH, MICH, FAST, Airframe™, LWH,
Shell type PASGT and other ballistic helmets
ACH, MICH and other ballistic
helmets with 4-point retention
ACH, MICH and other ballistic
helmets with 4-point retention
compatibility with 4-point retention mounting holes. mounting holes. mounting holes.
COLORS AVAILABLE:
216-738-2518
www.teamwendy.com
EXFIL® SAR info@teamwendy.com
Photographed by Richard King Photography