Professional Documents
Culture Documents
Section 09 CT
Section 09 CT
Fluted Centraliser
Non-Rotating Centraliser
The BDK Adjustable Spring Roller Centraliser is capable of providing high centralising loads. Loads taken by the arms
are fully adjustable, to support individual toolstring configurations in deviated wells. A full through bore is incorporated
allowing conveyance of fluids.
The BDK Fluted Centraliser is used to centralise the Coiled Tubing at points within the well bore where problems of
centralisation are paramount eg. nipples, plugs, sliding sleeves etc.
Part Numbers
Contents Connection Codes Print Exit
Gapton Hall I/E Great Yarmouth Norfolk NR31 ONL UK TEL: +44 (0) 1493 441155 FAX: +44 (0) 1493 657403 - EMAIL: sales@bdkendle.co.uk WEB: www.bdkendle.co.uk
o o o o o o o
B D KENDLE ENGINEERING LIMITED COILED TUBING PRODUCTS PART NUMBERS PAGE 46a
REV. 3
Bow Spring Centraliser Toolstring Centralisers
The BDK Bow Spring Centraliser can be installed at any point within the bottom hole assembly. This style of Centraliser
provides a centralising force whilst passing through a range of diameters eg. Nipples, Sleeves etc.
Any combination of BHA size and centralising diameter available. Springs can be designed to suit operator requirements.
Body OD Assy No
1.750" 6891
2.250" 6918
2.500" 6909
3.125" 6917
The BDK Slip-over Spring Centraliser is available for all sizes of Coiled Tubing and is manufactured to customer
requirements.
The Centraliser clamps over the tubing or toolstring to provide a centralising force whilst passing through a range of
diameters eg. nipples, sleeves etc.
The unique preloaded Coil Spring allows the Centraliser to support a constant load from its maximum to its minimum OD.
Any combination of BHA size and centralising diameter available. Springs can be designed to suit operator requirements.
The BDK Non-Rotating Centraliser protects the lower bottom hole assembly. The advantage of this allows the lower
assembly to rotate while being supported by the external flutes, thus eliminating possible wear.
The BDK Multi-Roller Wheel Centraliser is designed for use in highly deviated wells. The wheels incorporated in the
design reduce friction which can be caused by the toolstring scraping against the tubing wall.