This document is a 12 month inspection checklist for an AU480 chemistry analyzer. It lists various components that should be cleaned, lubricated, replaced, inspected, aligned or have their performance checked during the inspection. These include components of the main body, sampler, reagent refrigerator unit, STAT table unit, sample and reagent transfer units, cuvette wash and mixing units, dispenser unit, ISE main unit, and the DPR. The checklist notes the inspection and replacement schedule for specific components like the vacuum pump, waste pump, and battery.
This document is a 12 month inspection checklist for an AU480 chemistry analyzer. It lists various components that should be cleaned, lubricated, replaced, inspected, aligned or have their performance checked during the inspection. These include components of the main body, sampler, reagent refrigerator unit, STAT table unit, sample and reagent transfer units, cuvette wash and mixing units, dispenser unit, ISE main unit, and the DPR. The checklist notes the inspection and replacement schedule for specific components like the vacuum pump, waste pump, and battery.
This document is a 12 month inspection checklist for an AU480 chemistry analyzer. It lists various components that should be cleaned, lubricated, replaced, inspected, aligned or have their performance checked during the inspection. These include components of the main body, sampler, reagent refrigerator unit, STAT table unit, sample and reagent transfer units, cuvette wash and mixing units, dispenser unit, ISE main unit, and the DPR. The checklist notes the inspection and replacement schedule for specific components like the vacuum pump, waste pump, and battery.
Main Body C L A Main Body R Degasser Degasser (48 Months) Piping (Wash Line) Vacuum Pump (24 Months) Piping (Waste Line) Valve Power Supply Diaphragm Cooling Fin Waste Pump (12 Months) Cooling Fan Valve Diaphragm Sampler O Ring Barcode Reader Feed Plate DPR Base Plate at Feed Plate Battery (Upon request) Rack Feed Belt Rack Feed Surface Inspection / Alignment Reagent Refrigerator Unit Main Body I A Reagent Barcode Reader Float Switch Window Sampler STAT Table Unit Feed Plate Tension Sample Barcode Reader Rack Transfer Function Window Incubator Unit Sample, Reagent Transfer Units Coolant Volume Spline Shaft Photocal CH Shaft Position Confirmation ISE Unit Liquid Level Cuvette Wash, Mixing Units Position Confirmation DPR Hard Disk Working Dispenser Unit Guide Overall Performance Check ISE Main Unit Data Block ISE Calibration Joint Tube Calibration Regent Tray Control Dispenser Guide