Professional Documents
Culture Documents
Laboratory Tape Caster: Model CAM-T1
Laboratory Tape Caster: Model CAM-T1
Laboratory tape caster is design to cast slurries in labs or small scale productions in to
homogeneous tape. Tape is cast on to carrier PET film. Carrier film is unwounded from a
roll with adjustable torque control, which determines carrier tape tension. Carrier tape is
guided through casting head where slurry is deposited by doctor blade method.
Casting gap is easy adjustable by micrometer screws. Gape measurement is done by
two measuring gauges (readout in micrometers or mills). High precision tungsten
carbide doctor blade and granite bottom ensures high precision casting down to 5
micrometers.
Slurry fed is done by gravity from a slurry vessel. Slurry level in a fully covered Teflon
casting box is determined by height of inlet slurry tube.
Casting speed is adjustable. Up to four meter long drying section covered by glass plate
and connection to factory exhaust is available for tape drying. Amount of fresh air and
exhausted air is adjustable by flappers. Optionally machine can be equipped with
additional hot air inlet and/or bottom plate heating for more efficient drying.
At the end tape is wound together with carrier film in to a roll.
Technical specification: