Professional Documents
Culture Documents
Sukrut: Oil Level Indicator
Sukrut: Oil Level Indicator
Sukrut: Oil Level Indicator
SPECIFICATIONS :
Liquid in Tank : Transformer oil. DRIVEN
MAGNET FLOAT
Working : POINTER
IN AIR IN LIQUID
0 0
Temp. : -30 to 120 Celsius of oil
2
Pressure : 0 to 1 kg/cm 0
Travel : 45 max. See Fig. 3
Environment : Indoor or Outdoor
Margin : Leave 100 mm beyond Lower Limit and
Mounting :
150 mm above Higher Limit for
To mount the indicator, buyer has to provide
Clearance. (See Fig. 3)
mounting pad as per Fig. 2.
Switch :
Calibration : Type : Mercury Switch
Dial size : 250 mm Dia nominal. Contact Rating : 5 Amps 240 V AC, 0.5 Amp 240V DC
Unit : Calibration in any unit as per
customers requirement is Operation : See wiring diagram (Fig.5)
possible.
Colour : Black marking on yellow ROUTINE TESTS :
Each indicator is tested for
background OR black marking on
1. Specified levels. 2. Switch operation 3. HV Test
white background OR any other.
0 4. Leakage Test.
Spread : Max 150 (see Fig. 4 view of dial). A combined test certificate is issued for each batch.
Float (sensor) and arm : HOW TO ORDER :
Material : Float - Brass, We provide a Questionnaire for specifying your requirements.
Float arm - S.S. However, a drawing is acceptable giving all specifications.
FIG. 2 OIL LEVEL INDICATOR MODEL SO HE - 10 - ATMS
By removing these 6 screws dial body ORIENTATION OF MOUNTING PAD FOR 300
can be separated from base unit. (Any other Inclination possible)
6” NB Pipe
1 2 3 4 56 7 8 9 10 12
TOP
15
0N
114
Oil Level at Mark ‘EMPTY’
B
22
26
5
5
B
b
12
Approx
BOTTOM
136
075
160 Use M10 Bolts x 50 Long
with Nuts & Washer - 8 Nos.
09.5
110
13 12 11 Pipe
Mounting Pad, Gasket Not Supplied
175 by ‘SUKRUT’
Hardware, Gasket & Cable Gland-Not Supplied
by ‘SUKRUT’ Details at ‘B’
PART LIST :
Sr.No. Description Material. Sr.No. Description Material.
1 Housing Cast. Al. 8 Float Arm (9.5 Pipe) S.S.
2 Base with Flange Cast Al. 9 Bracket for Float S.S.
3 Gasket (Neoprene) 6 mm thick. Rubber. 10 Roller Float Brass
4 Mounting Pad M.S. 11 Cable Gland (3/4” BSC.) Brass
5 Bracket Cast Al 12 Terminal Box with cover Cast Al.
6 Lever with Gear Brass 13 Ring for Glass Cast Al..
7 Split Pin Brass Item Nos. 3, 4 & 11 are not supplied by Sukrut
EXTERNAL WIRING
0
35C
1/4 ALARM SUPPLY
0
45 Max EMPTY
100
OIL LEVEL
AT EMPTY Contact Rating : 5 Amps 240 V AC,
ANY OTHER MARKING IS POSSIBLE 0.5 Amp 240 V DC
GENERAL NOTES :
1. Indicators of different specifications are not interchangeable. Hence care should be taken while storing
Indicators and their Float with Arms with respective Sr. Nos. This indicator can be used for inclined mounting only,
at any angle specified by buyer.
2. Float & Indicator, loose or assembled, should be handled carefully as they cannot be repaired if damaged.
3. The complaint of damage or demand for spares should be very specific with respect to Sr. No. of indicator.
Lot of correspondence and time can be saved just by informing Sr. No. of concerned Indicator.
4. We continuously review specifications and where appropriate, introduce modifications. We, therefore, reserve
the right to change specifications in this catalogue without prior notice.
SUKRUT UDYOG
9/1 A, ERANDAWANA, PUNE 411 004. (INDIA)
Ph. No. : +91 20 25441514, 25441726
Fax No. : +91 20 25440231.
E-Mail : sukrut@pn2.vsnl.net.in
Website : www.sukrutudyog.com