Professional Documents
Culture Documents
BOP Replacement Parts Catalog
BOP Replacement Parts Catalog
Riser
System
Stack
System
SD5211-96 SD11600-96
Cameron has a focused drilling organization which is dedicated to meeting designed and manufactured to provide safety, reliability and convenience to
the changing needs of our customers. One of the ways we accomplish the operator.
this is by providing total systems for land and subsea drilling including BOP Riser Systems
stacks, complete choke manifold systems, riser systems and high technology Cameron riser system components, spider/gimbal, telescoping joint, RST
control systems. ring, fill-up valve, RF and RD riser joints, termination spool and flex joint are
BOP Stack Systems designed to meet the stringent requirements for drilling in deep water.
Cameron ram-type BOPs, annular BOPs and gate valves can meet the Control Systems
most basic land drilling needs as well as critical, weight sensitive, harsh Cameron offers a complete hydraulic control system as well as a multiplex
environmental platform requirements. Components in Cameron’s subsea control system for subsea drilling applications. Cameron supplies all the
BOP stack systems, ram-type BOPs, annular BOPs, gate valves and BOP components required for choke control systems as well as all of the compo-
stack structures incorporate years of field-proven technology and reliability. nents used to control the BOP stack and associated equipment. For land
Choke Manifold Systems applications, Cameron’s pump accumulator unit and remote control panels
Cameron supplies all necessary components for a choke manifold including are designed to customer specifications. All of our components offer field-
manual and hydraulic chokes, and H2 chokes, J-2 transmitters, pressure proven reliability and high quality, dependable components.
gauges, check valves, buffer tanks and all connecting equipment required For more information on complete Cameron drilling systems, contact your
to assemble the choke manifold. All Cameron choke manifold equipment is local Cameron representative or visit our web site (http//camerondiv.com).
Cameron
BOP Replacement Parts Catalog
Cameron provides all of the OEM products and services necessary to maintain the full range of Cameron drilling products. This catalog contains
information on our worldwide network of aftermarket facilities as well as detailed information on the replacement parts necessary for the following
Cameron products:
The Cameron BOP Replacement Parts Catalog, along with the 1996-1997 Cameron General Catalog, is also available on CD ROM. The electronic
version of the catalog provides easy-to-use, interactive information on all Cameron products. The CD ROM is compatible with MacIntosh and
Windows 3.1 and Windows 95 systems. To obtain a copy the CD ROM, contact your Cameron representative or follow the “How to Order”
instructions below.
For additional information on Cameron products, be sure to visit our web site (http://www.cameron div.com).
1
Contents
Page Page
2
Cameron Aftermarket Capabilities
In any area of the world where Cameron drilling products are used, Cameron TVM is not just a repair program, It is a comprehensive package of services
aftermarket and repair facilities are ready to respond with the most to the drilling contractor. Through TVM, Cameron customers have a way to
comprehensive network of aftermarket products and services available in the drive down drilling costs and be more competitive. In addition, TVM provides
industry. Each of our facilities is strategically located to meet the exact needs of the customer with a single point of contact for equipment sales, repair and re-
the customers in the area. Yet all of the facilities benefit from our expertise and manufacturing and exchange.
worldwide communications network which links all facilities through an
electronic communication system and ensures instantaneous access to Spare Parts Inventory
information. Cameron aftermarket services include: total vendor management Cameron is committed to providing off-the-shelf delivery of spare parts in
(TVM), spare parts inventory, repair refurbishment (RGR), BOP exchange any location worldwide. By using genuine Cameron replacement parts,
program, field service customers are guaranteed to receive the same quality and performance as when
the product was new. To meet these needs, Cameron has established four
Total Vendor Management worldwide stocking locations to better meet delivery requirements. Elastomers
The TVM concept reflects a new relationship between equipment suppliers and frequently requested metal components are stocked in a temperature-
and drilling contractors by making cost efficiency of primary importance to both controlled warehouse in Katy, Texas; Aberdeen, Scotland; Singapore
sides. The traditional seller-buyer adversarial roles are eliminated, in effect and Abu Dhabi.
making the customer and supplier partners in cutting costs.
Cameron understands this process and has more experience in successful RGR
TVM programs than anyone else in the industry. With the development of this Cameron’s focus on aftermarket services includes a complete RGR program.
type of long-term agreement, Cameron and the customer work together to Cameron will repair equipment to customer specifications - fit for purpose, with
reduce the costs associated with the design, manufacture, delivery, installation a reasonable price and quick delivery. Cameron’s RGR goal is to receive the
and operation of equipment required for the drilling project. TVM contract equipment and do whatever is necessary to get it back in the field as quickly as
options may include: possible. In addition, Cameron has embarked on a detailed engineering study
• New equipment manufacture. to take as much time and money out of our RGR processes as possible while
• Field maintenance. still maintaining the quality customers expect from Cameron drilling products.
• Off-the-shelf delivery of spare and replacement parts. Cameron’s RGR program also includes the option of retrofitting BOPs with
• Repair and refurbishment of used and worn equipment. some of the features of more current BOP designs such as bonnet seal carriers,
large bore shear ram bonnets and tandem boosters.
• Used equipment exchange program
• Re-manufactured products BOP Exchange Program
• Inventory management and storage of customer property.
For those customers looking for an economical alternative to buying new
equipment or in situations where a BOP cannot be removed from service for the
time required to make the repair, Cameron offers a BOP exchange program.
For this program, Cameron maintains an inventory of remanufactured BOPs
that met API 6A, 14th edition NACE MR-01-75 restored to like-new condition
with a full one-year warranty. Customers can trade their used BOPs in
exchange for a remanufactured BOP. Cameron also offers remanufactured
BOPs for sale without an exchange.
3
Western Hemisphere Aftermarket Locations
Veracruz, Mexico
Dedicated aftermarket facility with
manufacturing support. Services include: Assembly, Hydro Testing, Welding,
Post Weld Heat Treat, Inhouse Heat Treat, Machining, Inspection, Blast and Paint,
Customer Property Storage.
Zárate, Argentina
Dedicated manufacturing facility with aftermarket support. Services include:
Assembly, Hydro Testing, Gas Testing, Welding, Post Weld Heat Treat,
Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.
4
Eastern Hemisphere Aftermarket Locations
Aberdeen, Scotland
Dedicated aftermarket facility with manufacturing support. Services include:
Assembly, Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding,
Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.
Stavanger, Norway
Dedicated aftermarket facility with
manufacturing support. Services include:Assembly, Marine Stack and Tree Assembly,
Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining,
Inspection, Blast and Paint, Customer Property Storage.
5
Cameron Elastomer Technology
From its Katy facility west of Houston, Texas, Cameron Elastomer CET's facilities provide "life prediction" and immersion testing. The life-
Technology provides engineered solutions to elastomeric material problems. prediction testing is based on the Arrhenius principle of thermochemical
State-of-the-art research, including associated mechanical design and reactions. Elevated temperatures are used to accelerate the thermochemical
engineering, is conducted at this totally integrated manufacturing facility. degradation of elastomer materials.
The 72,000-sq-ft plant is designed to support Cameron Division's elastomer Cameron employees are experts in elastomer technology and can take an
components and develop new products to meet the most stringent operating idea from the testing phase through full product development.
and environmental conditions. Today, there is a family of elastomer products specially formulated and
Cameron Elastomer Technology (CET) has extensive process development designed to meet the rigorous demands of the oilfield. These products, when
capability supported by continuing research, a comprehensive testing laboratory used in Cameron T, U II, and U ram and D annular BOPs, improve performance,
and engineering capability. These are combined to provide effective support for extend service life, reduce downtime, and lower operating costs.
the manufacturing of an extensive line of high-performance elastomer products. CAMRAM™, CAMRAM 350™, CAMULAR™ and CAMLAST™ elastomers
CET offers molded products utilizing compression, transfer and injection have set new standards in performance. Each is uniquely Cameron, including
molding techniques. Critical molded products are qualification-tested prior to design and manufacturing. Behind each product is the absolute commitment to
release for production. quality, performance and support that the industry has come to recognize as
Cold chambers and ovens are available for testing elastomers in temperature hallmarks of Cameron.
extremes ranging from -150°F to 700°F. Precise temperature control allows for An integral part of CET’s Katy facility is a temperature controlled elastomer
exposure of elastomer components to conditions that simulate the actual service warehouse. CET manufactured elastomer products and critical drilling metal
environment. spares are readily available to meet customer requirements.
SD-10810-96 SD-10861-96
Special equipment performs high temperature evaluation of ram packers. The CET facility produces a wide variety of elastomers components.
SD-10813-96 SD-24101-96
A ram-type packer is removed from an injection molding press. Cameron Elastomer Technology plant, Katy, Texas
6
CAMRAM Products
CAMRAM packers and top seals are designed specifically for Cameron ram • Diesel Mud Resistant
BOPs. These new elastomer products from Cameron Elastomer Technology last CAMRAM packers provide high resistance to diesel drilling muds. In field
longer and provide increased margins of safety in severe drilling environments service, CAMRAM packers have performed as well in high-temperature mud
than do look-alike replacement parts. That’s under all conditions — high conditions as conventional packers perform dry at room temperature.
temperatures, diesel mud and heavy stripping. CAMRAM long-life packers
mean fewer problems, less downtime and better overall performance. • Superior Stripping/Snubbing Performance
The superior elastomer material, in combination with the lipped-plate
design, reduce seal extrusion and wear in stripping and snubbing service.
CAMRAM Characteristics
In fact, CAMRAM packers have demonstrated a stripping capability at least
three times greater than conventional packers.
• Higher Temperature Capability
CAMRAM packers made with high-temperature nitrile rubber provide a 50°F • Extreme High Temperature Capability
increase in the service temperature of the BOP in which they are used. For applications which require higher temperature capabilities than standard
CAMRAM packers have proven successful in 250°F sustained service and CAMRAM packers, Cameron Elastomer Technology has developed
have withstood excursions to 300°F. CAMRAM 350 packers and top seals which are made of CAMLAST.
CAMRAM 350 packers and top seals operate up to 350°F. They can be
300% 300%
270 CAMRAM Packer Rubber CAMRAM Packer Rubber
Conventional Packer Rubber 250 Conventional Packer Rubber
200 200
Retained Properties
170
130
110
100 100 100 100 100 100 100 100
100% 100%
0% 0%
70°F 300°F Elongation Tear Abrasion Tensile Elongation Rubber
Tensile Strength Strength Resistance Strength Hardness
Mechanical Properties
Original Mechanical Properties 70 Hours in 300°F Diesel Fluid
7
CAMRAM: Fatigue Tests Prove Performance
CAMRAM 47,928
Brand A* 11,980
Brand B* 15,638
Brand C* 2,366
Brand D* 14,168
Brand E* 1,687
0 10 20 30 40 50
8
CAMRAM 350 Products
CAMRAM 350 packers and top seals are made with CAMLAST™ high • CAMRAM 350 packers and top seals have been in field use since 1985
performance elastomer available exclusively from Cameron Elastomer when they were first used in Puckett, Mississippi to control a gas well
Technology. In addition, CAMRAM 350 packers have a patented lipped top and blowout. SInce then, CAMRAM 350 components have continued to prove
bottom plate design for increased service life. In addition, anti-extrusion wings reliable and rugged in field service applications.
have been added to the end of the packer plates to reduce elastomer extrusion at
elevated temperatures. Benefits of CAMRAM 350 include: The CAMRAM 350 logo molded into all CAMLAST packers and top seals
• CAMRAM 350 packers and top seals operate up to 350° F. Standard ensures a genuine quality part from Cameron Elastomer Technology.
CAMRAM packers operate at temperature up to 250° F which is at least
50° F higher than non-OEM packers and top seals.
• CAMRAM 350 packers and top seals can operate in H2S (hydrogen
sulfide) concentrations up to 20% without detrimental effects to
CAMLAST elastomer performance.
• CAMRAM 350 is available for all Cameron ram-type BOPs in which
standard CAMRAM is available. It is not an "off-the-shelf" item, but is
readily available on short notice special orders from Cameron Elastomer
Technology.
• CAMRAM 350 packers and top seals are more expensive than standard
CAMRAM packers and top seals. However, this is a small price to pay
for the level of performance offered by CAMRAM 350 components in
critical applications. CAMRAM 350 Packer
CAMRAM 350 Packers and Top Seals Shut-In Well after 43 Days of Exposure to H2S
In actual field test conditions, the CAMRAM 350 16-3/4” x 5-1/2” 5000 psi
pipe ram packers and top seals pictured at right, were successfully used to
shut-in a gas well after exposure to natural gas containing 35% H2S at
temperatures of 190° for 43 days. The components show negligible damage
after exposure to the severe conditions experienced in controlling the blowout.
CAMRAM 350 packers and top seals are made with CAMLAST™ elastomer
and are intended for use to 350°F in high H2S concentrations and with water
and/or diesel based drilling mud. CAMLAST elastomer is a proprietary
material made only by Cameron Elastomer Technology in Katy, Texas.
CAMRAM 350 packers and top seals are available on a special order basis
only.
For applicable part numbers and availability, please contact your local
CAMRAM 350 16 3/4” top seal after exposure
Cameron representative or the Cameron Elastomer warehouse at
(281) 391-4644.
9
CAMRAM Lipped Plate Design
Cameron Elastomer Technology's elastomer experts have integrated a Because rubber performs best when it is under compression, Cameron's
superior elastomer compound into an exclusive lipped-plate packer design that lipped-plate design provides "rubber in compression" at the wearing surface to
produces "rubber in compression" at the sealing surface. The design is a enhance the elastomer mechanical properties as well as the seal. The lipped
Cameron exclusive and gives the packers improved sealing capabilities and plate is unique because it provides stiffness in the wear direction, yet allows
extended service life. ample feed to the compressed rubber.
Upper Plate
▼
Upper Plate
▲
Wearing Surface Lower Plate
SD-7395
Rubber in Compression
Cameron offers the most comprehensive line of rams in the industry for its BOPs Cameron Elastomer Technology (CET) including high performance products such as
including pipe rams, shearing blind rams, and variable bore rams. A selection of CAMRAM™ and CAMRAM 350™ elastomers for high temperature applications.
dual string rams are also available to fit specific preventers. These elastomer products are available to fit Cameron BOPs and are standard in
Cameron also offers high quality elastomer products for its rams through some models and sizes.
Variable Bore Rams Available In Some BOP Sizes Yes Yes Yes Yes
FLEXPACKER Rams Available In Some BOP Sizes No In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes
Shearing Blind Rams Available In Some BOP Sizes Yes Yes Yes Yes
DVS Shear Rams Available In Some BOP Sizes No In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes
Grip and Seal Rams Available No No In Some BOP Sizes In Some BOP Sizes No
CAMRAM Top Seals Standard Yes Yes Yes (through 18-3/4”) Yes (through 18-3/4”) Yes (through 18-3/4”)
CAMRAM Packers Standard Yes Yes In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes
CAMRAM 350 Packers and Top Seals Available Yes Yes Yes Yes Yes
10
Comparison of Cameron Ram-Type Blowout Preventers
Cameron offers a wide range of ram-type BOPs to meet the dynamic Regardless of the model, all of the pressure containing components in
needs of the drilling industry. The Cameron U BOP was initially designed Cameron ram-type BOPS are forged to provide added safety and reliability.
for underwater drilling. Today, there are more U BOPs in the field These ram-type BOPs are just part of the complete line of Cameron
worldwide than any other ram-type BOP in the industry. As technology and drilling system products which include annular and workover preventers,
the needs of the drilling industry changed, Cameron responded by gate valves, controls, subsea riser systems and land and subsea control
developing new ram-type BOP designs. Cameron introduced the U II BOP systems.
for subsea applications and has since developed the T BOP and the In addition, Cameron offers a complete range of drilling replacement
lightweight TL and UL models for land and subsea applications. parts through our worldwide network of aftermarket facilities.
11
U BOP
The Cameron U BOP is the most widely used ram-type BOP for land, platform • Bonnet seal carrier is available to eliminate the need for high makeup
and subsea applications worldwide and offers the widest range of sizes of any torque on bonnet studs and nuts.
Cameron ram-type BOP. • Hydraulically operated locking mechanisms, wedgelocks, lock the ram
Like all other Cameron preventers, the rams in the U BOP are pressure- hydraulically and hold the rams mechanically closed even when actuating
energized. Wellbore pressure acts on the rams to increase the sealing force and pressure is released. The operating system can be interlocked using
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually sequence caps to ensure that the wedgelock is retracted before pressure is
improved by increased well bore pressure. applied to open the BOP.
Other features of the U BOP include: • For subsea applications, a pressure balance chamber is used with the
• Hydraulic stud tensioning available on larger sizes to ensure that stud wedgelocks to eliminate the possibility of the wedgelock becoming unlocked
loading is consistently accurate and even. due to hydrostatic pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 21 through 26
for rams available to fit the U BOP.
SD-3772
Wedgelock Assembly
SD-5308
U Blowout Preventer
12
U BOP Hydraulic Control System
The U blowout preventer is designed so that hydraulic pressure opens and Ram opening pressure opens the rams. Following ram change-out, this
closes the rams and provides the means for quick ram change-out. pressure closes the bonnets. The rams are pulled outward, near the bonnets
Ram closing pressure closes the rams. When the bonnet bolts are removed, before the bonnets begin moving toward the preventer body. This assures that
closing pressure opens the bonnet. After the bonnet has moved to the fully the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic
extended position, the ram is clear of the body. An eyebolt can be installed in the pressure draws the bonnets tightly against the preventer body and the bonnet
top of each ram to lift it out of the preventer. bolts are reinstalled to hold the bonnets closed.
SD-84-05
U BOP Operating Data and Fluid Requirements Large Bore Shear Bonnet Operating Data and Fluid Requirements
Bore Size and Gals to Open Gals to Close Locking Closing Opening Bore Size and Gals to Open Gals to Close Locking Closing Opening
Working Pipe Rams Pipe Rams Screw Turns Ratio Ratio Working Pipe Rams Pipe Rams Screw Turns Ratio Ratio
Pressure (1 Set) (1 Set) (Each End) Pressure (1 Set) (1 Set) (Each End)
7-1/16" All WP 1.3 1.3 18 6.9:1 2.2:1 7-1/16" All WP __ __ __ __ __
11" Except 15,000 psi 3.4 3.5 27 7.3:1 2.5:1 11" Except 15,000 psi 6.8 7.9 27 12.0:1 4.8:1
11" 15,000 psi 5.7 5.8 32 9.8:1 2.2:1 11" 15,000 psi 8.9 9.0 32 15.2:1 3.7:1
13-5/8" Except 15,000 psi 5.5 5.8 32 7.0:1 2.3:1 13-5/8" Except 15,000 psi 10.5 10.9 32 10.8:1 4.5:1
13-5/8" 15,000 psi Model B 10.4 10.6 45 10.6:1 3.6:1 13-5/8" 15,000 psi Model B 16.0 16.2 45 16.2:1 6.0:1
16-3/4" 3000 psi Model B 9.8 10.6 38 6.8:1 2.3:1 16-3/4" 3000 psi Model B 18.4 19.0 38 10.4:1 4.4:1
16-3/4" 5000 psi Model B 9.8 10.6 38 6.8:1 2.3:1 16-3/4" 5000 psi Model B 18.2 19.0 38 10.4:1 4.4:1
16-3.4" 10,000 psi 11.6 12.5 45 6.8:1 2.3:1 16-3.4" 10,000 psi 18.2 19.1 45 10.4:1 4.4:1
18-3/4" 10,000 psi 21.3 23.1 54 7.4:1 3.7:1 18-3/4" 10,000 psi __ __ __ __ __
20-3/4" 3000 psi 8.1 8.7 46 7.0:1 1.3:1 20-3/4" 3000 psi 14.3 14.9 46 10.8:1 1.7:1
21-1/4" 2000 psi 9.0 8.7 46 7.0:1 1.3:1 21-1/4" 2000 psi 14.3 14.9 46 10.8:1 1.7:1
21-1/4" 5000 psi 27.3 30.0 54 7.2:1 4.0:1 21-1/4" 5000 psi __ __ __ __ __
21-1/4" 10,000 psi 24.5 26.9 51 7.2:1 4.0:1 21-1/4" 10,000 psi __ __ __ __ __
26-3/4" 3000 psi 10.1 10.8 58 7.0:1 1.0:1 26-3/4" 3000 psi __ __ __ __ __
13
U BOP Specifications and Accessories
The following specifications apply to typical Cameron U type BOPs. Your The capital letters in the following designations refer to the three U BOP
Cameron representative can provide information on non-standard BOP dimensional views and dimensions charts shown on the following page.
assemblies. A-1 Length - bonnets closed, locking screws locked
• Side outlets to 4-1/16" (7-1/16" on 26-3/4" BOPs) can be provided beneath A-2 Length - bonnets opened, locking screws unlocked
each set of rams on either or both sides of U BOPs. Side outlets can be A-3 Length - bonnets closed, with wedgelocks
studded, open-face flange or clamp hub with the same pressure rating as the A-4 Length - bonnets opened, with wedgelocks
vertical run connections. B-1 Height - flanged
• Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A B-2 Height - clamp hubs
or applicable standards. Type 6BX flanges are standard for 10,000 and B Height - added height if 30" spacing is required for double
15,000 psi working pressures and for 5000 psi for 13-5/8" and larger bore C Width - no side outlets
BOPs. D Centerline of preventer to outlet flange or hub face. This distance is
• Hydraulic control connections for operation of rams and bonnets are 1" NPT. variable and must be determined per individual specifications.
There are two connections for each set of rams. Wedgelock connections are E-1 Centerline of side outlet (outlet below rams in double) to bottom flange
1/2" NPT. face
E-2 Centerline of side outlet (outlet below rams in double) to bottom hub
• The dimensions chart shown on the following page does not include spacers
face
between rams for double ram models. U BOPs with spacers to clear tool
F-1 Top of upper ram to top flange face
joints can be obtained on special order.
F-2 Top of upper ram to top hub face
G Height of ram
H-1 Centerline of side outlet between rams to bottom flange face
H-2 Centerline of side outlet between rams to bottom hub face
J Top of lower ram to bottom of upper ram
* One required.
**Two required for single preventer, four for double preventer.
*** Commercially available sockets are recommended.
14
▲
U BOP Dimensions
▲
▲
A ▲ C
▲ ▲ D
▲
▲F ▲
SD-84-201
G Top View - Single or Double U BOP
▲
▲
J B
▲
▲ A
G
▲ ▲
H F
▲
▲
▲
E
▲▲ SD-84-201 ▲ G B
▲ ▲
E
Side View - Double U BOP ▲ SD-9928
▲
Side View - Single U BOP
15
7-1/16" 3000 - 11" 10,000 psi WP U BOP Part Numbers
22
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
29 6
33 9 U BOP Exploded View
27
3 28
13 8
7 14
16
11" 15,000 - 16-3/4" 5000 psi WP U BOP Part Numbers
22
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
29 6
33 9 U BOP Exploded View
27
3 28
13 8
7 14
17
16-3/4" 10,000 - 26-3/4" 3000 psi WP U BOP Part Numbers
22
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
29 6
33 9 U BOP Exploded View
27
3 28
13 8
7 14
18
Large Bore Shear Bonnets
SD-10816
12A**
2A
24A
26A
5A
42A
Large Bore Shear Bonnet Assembly
(See pages 16, 17 and 18 for items not called out on this drawing.)
3A
5
6
1
Tandem Booster Exploded View
8
4
3
14
12
*The 7-1/16" tandem booster is a part of the standard land and platform shear configuration for 7-1/16" U BOPs.
19
U and U II BOP Ram Hang-Off Weights and Shear Requirements
20
U BOP Pipe Rams
Pipe rams are available for use in Cameron U BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the charts on
this page and the next page. Cameron pipe rams include the following features: Top Seal
• Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
• Ram packers lock into place and are not dislodged by well flow.
• All Cameron pipe rams are suitable for H 2S service per NACE MR-01-75.
• CAMRAM™ top seals are standard for all U BOP pipe rams from 7-1/16”
through 18-3/4” sizes. Packer part numbers beginning with 644xxx indicate
the CAMRAM lipped-plate design. All other packers use standard elastomer
SD-10825
material and reinforcement plates.
• CAMRAM 350™ packers and top seals are available for high temperature Packer
service and for service in which concentrations of H 2S are expected.
U BOP Pipe Ram
Ram
Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer
Blind 644504-01 644500-01 644215-01-00-01 644219-01 44118-01 644218-01-00-01 644222-01 44121-01 644221-01 644225-01 44147-01 644224-01-00-01
1.050" 644504-02 644501-01 644215-02 __ __ __ __ __ __ __ __ __
1.315" 644504-03 644501-02 644215-03 44233-25 44118-07 19243-08 __ __ __ 644225-02 44148-06 644224-02
1.660" 644504-04 644501-03 644215-04 44233-02 44118-02 19243-06 644222-02 44121-02 644221-02 644225-03 44148-05 644224-03
1.900" 644504-05 644501-04 644215-05-00-01 44233-03 44118-03 19243-05 644222-03 44121-03 644221-03 644225-04 44148-07 644224-04
2.062" 644504-06 644501-05 644215-06 44233-04 44118-04 19243-04 644222-04 44121-04 644221-04 644225-05 44148-03 644224-05
2.375" 644504-07 644501-06 644215-07-00-01 644219-06 44118-05 644218-06-00-01 644222-05 44121-05 2010454-05* 644225-06 44148-01 644224-06-00-01
2.875" 644504-08 644501-07 644215-08-00-01 644219-07 44118-06 644218-07-00-01 644222-06 44121-06 2010454-06* 644225-07 44148-02 644224-07-00-01
3.500" 644504-09 644502-01 644215-09-00-01 644219-08 644835-01 644218-08-00-01 644222-07 644753-01 2010454-07* 644225-08 644738-01 644224-08-00-01
4.000" 644216-11 644503-02 644215-11-00-01 644219-10 44119-02 644218-10 44234-10 44122-04 690808-09 644225-10 44149-02 644224-10-00-01
4.500" 644216-12 644503-03 644215-12-00-01 644219-11 644835-02 644218-11-00-01 644222-09 644753-02 2010454-09* 644225-11 644738-02 644224-11-00-01
4.750" __ __ __ 44233-12 44119-04 19374-04 __ __ __ 644225-13 44150-01 644224-13
5.000" 644216-14 644503-05 644215-14-00-01 644219-14 644835-03 644218-14-00-01 644222-10 644753-03 2010454-10* 644225-14 644738-03 644224-14-00-01
5.500" 644216-15 644503-06 19474-06 644219-16 44120-01 644218-16 44234-13 44123-01 690808-12 644225-16 44150-03 644224-16-00-01
5.750' __ __ __ 44233-23 44120-10 644218-17 __ __ __ __ __ __
6.000" __ __ __ 44233-16 44120-02 19375-02 44234-14 44123-02 690808-13 44244-13 44150-04 31215-09
6.625" __ __ __ 44233-17 644835-04 19375-03 44234-15 44123-03 690808-14 644225-18 644738-04-00-02 644224-18-00-01
7.000" __ __ __ 44233-18 44120-04 19375-04 44234-16 44124-01 2010454-14 644225-19 44151-01 644224-19-00-01
7.625" __ __ __ 44233-19 44120-05 644210-21-00-01 44234-17 44124-02 690808-16 44244-15 44151-02 644224-20
7.750" __ __ __ 44233-22 44120-09 19375-11 __ __ __ 44244-25 44151-06 19506-09
8.625" __ __ __ 44233-20 44120-06 19375-06 __ __ __ 44244-16 44151-03 644224-22
9.000" __ __ __ __ __ __ __ __ __ 44244-24 44151-04 19506-06
9.625" __ __ __ __ __ __ __ __ __ 644225-24 44151-05 644224-24-00-01
10.750" __ __ __ __ __ __ __ __ __ 44244-18 44152-01 038372-00-00-01
11.750" __ __ __ __ __ __ __ __ __ 44244-26 614208-01 614227-01
3.500" Aluminum 644216-10 644503-01 19474-07 44233-08 44119-06 19374-06 __ __ __ 44244-20 44149-04 31215-16
4.500" Aluminum 644216-13 644503-04 19474-08 44233-11 44119-07 19374-07 __ __ __ 44244-10 44149-05 31215-17
5.000" Aluminum __ __ __ 44233-24 44119-08 19374-09 __ __ __ 44244-32 44150-08 31215-27
*After depletion.
21
Part Numbers for U BOP Pipe Rams
13-5/8" U BOP 16-3/4" U BOP 18-3/4" U BOP 21-1/4" U BOP
Pipe 15,000 psi 3000, 5000 and 10,000 psi 10,000 psi 5000 and 10,000 psi
Size Top Seal 644226-01 Top Seal 644229-01-00-01 Top Seal 644232-01-00-01 Top Seal 2010939-01
Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer
Blind 644228-01 44143-01 644227-01 644231-01 44179-01 644230-01 644234-01 44184-01 644233-01 44262-01 44214-01 2010851-19
1.050" __ __ __ __ __ __ __ __ __ __ __ __
1.315" __ __ __ __ __ __ __ __ __ __ __ __
1.660" __ __ __ __ __ __ __ __ __ __ __ __
1.900" __ __ __ 644231-02 44180-03 644230-02 __ __ __ __ __ __
2.062" 44243-02 44144-03 40910-20 __ __ __ __ __ __ __ __ __
2.375" 644228-03 44144-01 644227-03 644231-03 44180-01 644230-03 44254-02 44185-01 41856-01 44262-02 44215-01 40962-01
2.875" 644228-04 44144-02 644227-04 644231-04 44180-02 644230-04 44254-03 44185-02 644233-03 44262-03 44215-02 40962-02
3.500" 644228-05 644739-01 644227-05 644231-05 644740-01 644230-05 644234-04 644741-01 44233-04 44262-04 644743-01 40962-03
4.000" 644228-07 44144-06 644227-07 644231-06 44181-02 644230-06 44254-06 44185-05 41856-04 44262-06 44215-05 40962-04
4.500" 644228-08 644739-02 644227-08 644231-07 644740-02 644230-07 44254-07 644741-02 41856-05 44262-07 644743-02 40962-05
4.750" 44243-11 44144-09 40910-07 644231-08 44181-04 644230-08 44254-09 44185-08 41856-06 44262-09 44215-08 40962-06
5.000" 644228-11 644739-03 644227-11-00-01 644231-09 644740-03 644230-09 644234-10 644741-03 644233-10 44262-10 644743-03 2010851-07
5.500" 44243-12 44145-03 40910-08 644231-10 44181-06 644230-10 44254-11 44185-10 41856-08 44262-11 44215-10 40962-08
5.750' __ __ __ __ __ __ __ __ __ __ __ __
6.000" 44243-14 44145-04 40910-09 644231-11 49291-01 644230-11 44254-13 44185-12 41856-09 44262-13 44215-12 40962-09
6.625" 44243-15 644739-04 40910-10 644231-12 49291-02 644230-12 44254-14 044185-13 41856-10 44262-14 044215-13 2010851-10
7.000" 44243-16 44146-01 644227-15 644231-13 49291-03 644230-13 44254-15 44185-14 41856-11 44262-15 44215-14 40962-11
7.625" 44243-17 44146-02 644227-16 644231-14 49291-04 644230-14 44254-16 44185-15 41856-12 44262-16 44215-15 40962-12
7.750" 44243-22 44146-07 40910-23 __ __ __ __ __ __ __ __ __
8.625" 44243-18 44146-03 40910-13 644231-15 49291-06 644230-15 44254-17 44185-16 41856-13 44262-17 44215-16 40962-13
9.000" 44243-19 44146-04 40910-14 644231-16 49291-07 644230-16 44254-18 44185-17 41856-14 44262-18 44215-17 40962-14
9.625" 44243-20 44146-05 644227-20 644231-17 49292-01 644230-17 44254-19 44185-18 41856-15 44262-19 44215-18 40962-15
10.750" 44243-21 44146-06 40910-22 644231-18 49292-02 644230-18 44254-21 44185-21 41856-20 44262-20 44216-01 40962-20
11.750" __ __ __ 644231-19 49292-03 644230-19 __ __ __ 44262-21 44216-02 40962-21
13.375" __ __ __ 644231-20 49292-04 644230-20 44254-22 44185-20 41856-22 44262-22 44216-03 2010851-22
13.625" __ __ __ __ __ __ __ __ __ 44262-24 044216-05 40962-24
13.750" __ __ __ __ __ __ __ __ __ __ __ __
16.000" __ __ __ __ __ __ __ __ __ 44262-23 44216-04 40962-23
3.500" Aluminum 44243-06 44144-05 40910-16 __ __ __ 44254-05 44185-04 41856-16 44262-05 44215-04 40962-16
4.500" Aluminum 44243-08 44144-08 40910-05 __ __ __ 44254-08 44185-07 41856-17 44262-08 44215-07 40962-17
5.000" Aluminum __ __ __ __ __ __ __ __ __ __ __ __
22
U BOP Shearing Blind Rams
Cameron shearing blind rams shear the pipe in the hole, then bend the • Cameron SBRs can cut pipe numerous times without damage to the cutting
lower section of sheared pipe to allow the rams to close and seal. Shearing edge.
blind rams can be used as blind rams during normal drilling operations. • The single-piece body incorporates an integrated cutting edge.
The DS shearing blind ram can cut larger diameter tubulars or multiple • CAMRAM™ top seals are standard for all U BOP shearing blind rams
tubing strings regardless of their orientation to the centerline of the ram. A blade through 18-3/4". Part numbers beginning with 644xxx indicate CAMRAM.
seal between the upper and lower faces eliminates the need for moving pipe All other top seals are standard elastomer material.
after shearing. • H 2S SBRs are available for critical service applications and include a blade
Features include of shearing blind rams and DS rams include: material of hardened high alloy suitable for H 2S service.
• Large frontal area on the blade face seal reduces pressure on the rubber and • The Cameron shearing blind ram has a single-piece body with an integrated
increases service life. cutting edge.
6 6
6
8 5 1
7
5 7
12 15
10 1 2
13 2
SD-9348
4 3
3 4
4
1
14
11 SD-10815 5 SD-10827
DS Shearing Blind Ram 3
9
7
11" 5000 and 10,000 psi 49392-01-00-02 49009-01-00-02 2010462-04 46751-04 46752-04 644217-01-00-01 049392-02-00-02 049010-01-00-02 46751-04 46752-04
11" 15,000 psi 614297-01 614275-01 2010462-04 2010460-07 2010461-07 2010453-01 614297-02 614274-01 2010460-07 2010460-07
13-5/8" 5000 and 10,000 psi 46748-01 46749-01 644435-01-00-01 046751-01-00-01 046752-01-00-01 644223-01-00-01 46748-02 46750-01 046751-01-00-01 046751-01-00-01
13-5/8" 15,000 psi 614004-01 614002-01 644435-01-00-01 46751-05 46752-05 644226-01 614004-02 614003-01 46751-05 46752-05
16-3/4" 5000 psi 46766-01 49006-01 46910-03 46751-03-00-01 46752-03-00-01 644229-01-00-01 46766-02 49007-01 46751-03-00-01 46751-03-00-01
16-3/4" 10,000 psi 46773-01 46774-01 46910-03 46751-03-00-01 46752-03-00-01 644229-01-00-01 46773-02 46775-01 046751-03-00-01 46751-03-00-01
18-3/4" 10,000 psi 46776-01 46777-01 46910-02 46751-02 46752-02 644232-02 46776-02 46778-01 46751-02 46752-02
20-3/4" 3000 psi 46783-01 46784-01 __ 615235-01-00-01 __ 19514-00-00-01 46783-02 46785-01 615247-01-00-01 615247-02-00-01
21-1/4" 2000 psi 46783-01 46784-01 __ 615235-01-00-01 __ 19514-00-00-01 46783-02 46785-01 615247-01-00-01 615247-02-00-01
21-1/4" 5000 psi 49983-01 49981-01 46910-05 46751-06 46752-06 645478-01 49983-02 49982-01 46751-06 46752-06
21-1/4" 7500 and 10,000 psi 46788-01 49012-01 46910-05 46751-06 46752-06 645478-01 46788-02 49011-01 46751-06 46752-06
23
U BOP DSI and DVS Shear Rams
Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are feature. DSI shear rams are capable of shearing tubing, small pipe, braided
also available for the U BOP. The interlocking feature of these rams provides the cable, slickline and solid sinker bar.
capability of shearing wireline and braided cable with zero tension in the line, DVS rams are similar in design to the standard shearing blind rams except
while still maintaining a seal. The blades are interlocked by using pockets in the that both blades are V shaped and interlocked. The DVS rams are capable of
lower ram and arms on the upper ram to prevent any gap between blade surfaces. shearing tubing, small pipe , braided cable and slickline.
DSI rams are similar to standard DS shear rams except for the interlock
Blade Seal
Upper Shear Ram
Side Packer Blade Packer
Lower Shear Ram Side Packer
Dual String Interlocking (DSI) Shear Rams Double V Shear (DVS) Shear Rams
rams are closed so the steel provides support for the rubber which seals against
the pipe.
U BOP Variable Bore Ram
24
FLEXPACKERS for U BOPs
The Cameron FLEXPACKER ram is the latest development in multiple-bore FLEXPACKER Sizes and Part Numbers
sealing. Each FLEXPACKER ram is designed to close and seal around several
BOP Size and Pipe Size Packer Top Seal
diameters of tubing and pipe. These packers can be used in existing Cameron Description Diameters Part No. Part No.
BOPs. Features include: 11" 3000, 5000 and 10,000 psi 2-3/8" to 3-1/2" 2010123-01 644217-01-00-01
• Stacks of metal inserts bonded into the elastomer, move radially in the 13-5/8" 3000, 5000 and 10,000 psi 2-3/8" to 3-1/2" 2010113-01 644223-01-00-01
elastomer as the BOP rams are closed. 18-3/4" 10,000 psi 2-7/8" to 5" 645346-01 644232-04
• As rams are energized, the proper set of metal inserts is forced against the 20-3/4" 3000 psi 5" to 7" 645353-01 19514-00-00-01
pipe. The top plate of the packer fits the largest diameter of pipe. 21-1/4" 2000 psi 5" to 7" 645353-01 19514-00-00-01
SD-10315
FLEXPACKER
SD-7786
CAMRAM 350
Packer
25
U BOP Rams for Multiple Completions
Non-sealing centralizing rams and companion subsea dual rams and U BOP. Also available are offset bore rams for 7-1/16" and 11" BOPs. Contact
packers for use with two strings of the same diameter are available for the a Cameron representative for more information.
18 19
24
26
42
34
SD-5287
26
Hydraulic Bonnet Bolt System Bonnet Bolt and Tensioner Part Numbers
BOP Size and Bonnet Compact
The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads Working pressure (psi) Bolt Tensioner Unit
and reduces the time required for making up and breaking out bonnet bolts. 11" 15,000 All 49795-13-10 614644-13-10*
• The hydraulic bonnet bolt is completely interchangeable with conventional 13-5/8" 5000 Pipe Ram 49795-13-05 614644-13-05*
bonnet bolts. It has a standard hexagonal head. An additional external 13-5/8" 5000 Shear Ram 49917-13-05 614644-13-05*
thread mates with the internal threads in the operating head of the hydraulic 13-5/8" 10,000 Pipe Ram 49795-13-10 614644-13-10
bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod 13-5/8" 10,000 Shear Ram 49917-13-10 614644-13-10*
permanently secured in the machined hole in the center of the bolt. 13-5/8" 15,000 All 49795-13-15 614644-13-15**
16-3/4" 5000 Pipe Ram 49795-16-05 614644-16-05*
• The hydraulic bonnet bolt tensioner consists of a compact tensioner unit
16-3/4" 5000 Shear Ram 49917-16-05 614644-16-05
with a remote pump.
16-3/4" 10,000 All 49795-16-10 614644-16-10**
18-3/4" 10,000 All 49795-18-10 614644-18-10**
21-1/4" 5000 All 49795-21-05 614644-18-10**
*Use 25,000 psi WP pump, part number 645035-01.
**Use 30,000 psi WP pump, part number 645035-02.
27
U II BOP
The Cameron U II BOP takes all of the features of the U BOP and adapts them pressure is released. The operating system can be interlocked using
for subsea use in the 18-3/4” 10,000 and 15,000 psi WP sizes. sequence caps to ensure that the wedgelock is retracted before pressure
Like all other Cameron preventers, the rams in the U II BOP are pressure- is applied to open the BOP.
energized. Wellbore pressure acts on the rams to increase the sealing force and • A pressure balance chamber is used with the wedgelocks to eliminate the
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually possibility of the wedgelock becoming unlocked due to hydrostatic
improved by increased well bore pressure. Other features of the U II BOP pressure.
include: Other features include hydraulically opening bonnets, forged body and a
• Internally ported hydraulic stud tensioning system ensures that stud loading wide selection of rams to meet all applications. See pages 31 and 32 for
is consistently accurate and even. rams available to fit the U II BOP.
• Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
• Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating
SD-10829
28
U II BOP Hydraulic Control System
U II BOP Dimensions
The following designations refer to the dimensional drawing:
▲
▲
A-1 Length -- bonnets closed, with wedgelocks D
A-2 Length -- bonnets opened, with wedgelocks ▲
B-1 Height -- flanged C
B-2 Height -- Clamp hubs
▲
B-3 Height -- studded x flanged
C Width -- no side outlets SD-5139
▲
▲
A
E-2 Centerline of side outlet (outlet below rams in double) to bottom
hub face ▲ ▲
F-1 Top of upper ram to top flange face F
▲
F-2 Top of upper ram to top hub face
G Height of ram G
H-1 Centerline of side outlet between rams to bottom flange face ▲ ▲
H-2 Centerline of side outlet between rams to bottom hub face J B
▲
J Top of lower ram to bottom of upper ram G H
▲
▲
E
▲ ▲ ▲
SD-5139
29
U II BOP Part Numbers
47
46
6
43
42
41
43
42
41
11 38
29
4
49
37
36
35
30 7
31 34 48
5
45
44 33
3a
3b
32
40
19
54
42
39 41
10
9
8
28
51
27
25
24
26
SD-7866
22
23
18 1
2 17 21
16 20 U II Exploded View
14 15 19
13
12
52
53
30
U II BOP Pipe Rams
Pipe rams are available for use in Cameron U II BOPs to fit all commonly U II BOP Pipe Ram Part Numbers
used sizes of tubing, drill pipe, drill collar or casing within the ranges in the
18-3/4" 10,000 and 15,000 psi U II
chart on this page. Cameron pipe rams include the following features: Pipe
PipeSize
Size Top Seal: 645282-01-00-01
• Cameron pipe rams are self-feeding and incorporate a large reservoir of Assembly Ram Packer
packer rubber to ensure a long-lasting seal under all conditions. Blind 644248-01 615407-01 644247-01*
• Ram packers lock into place and are not dislodged by well flow. 2.375" 644248-02 614770-01 644247-02*
• Cameron U II pipe rams are suitable for H 2S service per NACE MR-01-75. 2.875" 644248-03 614770-02 644247-03*
3.500" 644248-04 644742-01 644247-04*
• CAMRAM™ top seals are standard for all U II BOP pipe rams.
3.500" Aluminum 644248-05 614770-04 644247-05
• CAMRAM 350™ packers and top seals are available for high temperature
4.000" 644248-06 614770-05 644247-06
service and for service in which concentrations of H 2S are expected.
4.500" 644248-07 644742-02 644247-07
4.500" Aluminum 644248-08 614770-07 644247-08
4.750" 644248-09 614770-08 644247-09
Top Seal Packer 5.000" 644248-10 644742-03 644247-10-00-01
5.500" 644248-11 614770-10 644247-11*
6.000" 644248-12 614770-12 644247-12
6.625" 644248-13 644742-04 644247-13
7.000" 644248-14 614770-14 644247-14
7.625" 644248-15 614770-15 644247-15
8.625" 644248-16 614770-16 644247-16
9.000" 644248-17 614770-17 644247-17
SD-5307
9.625" 644248-18 614770-18 644247-18-00-01
Ram Body
One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all U II BOP variable bore
rams. The variable bore ram packer contains steel reinforcing inserts similar to
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe. SD-5129
Ram Body
U II BOP Variable Bore Ram Part Numbers U II BOP Variable Bore Ram
31
U II BOP Shearing Blind Rams
Cameron shearing blind rams shear the pipe in the hole, then bend the 6
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
Features include of shearing blind rams include: 1
• Large frontal area on the blade face seal reduces pressure on the rubber and 2
increases service life. 7 4
• Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
• The single-piece body incorporates an integrated cutting edge.
• CAMRAM™ top seals are standard for all U II BOP shearing blind rams.
• H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service. 5 3
SD-10827
• The Cameron shearing blind ram has a single-piece body with an integrated
cutting edge. U II BOP Shearing Blind Ram
U II BOP H2S Shearing Ram Assemblies U II BOP H2S Shearing Blind Ram
Item
Item Description
Description 18-3/4" 10,000 and
15,000 psi
1 Upper Ram Subassembly 644759-01
2 Ram 644752-01 CAMRAM 350 Shearing Blind Ram Blade and Side Packers
7 Blade Insert 644519-03 Item Description 18-3/4" 10,000 and
Item Description
8 Cap Screw 644524-01 15,000 psi
9 Lower Ram Subassembly 644759-02 3 Blade Packer, High Temperature 644904-01
10 Ram 644752-02 4 Left Side Packer, High Temperature 644905-01
11 Blade Insert 644519-02 5 Right Side Packer, High Temperature 644905-02
12 Pin 200231-00 6 Top Seal, High Temperature 645246-01
Note: All packers and top seals (Items 3, 4, 5, 6) are the same as the shearing blind ram shown above.
32
T BOP
The Cameron T blowout preventer offers a unique combination of benefits, • Hydraulic stud tensioning ensures that stud loading is consistently accurate
including safety, economy, reliability, extended service life, reduced height and and even.
fast and easy service. • Hydraulically operated locking mechanisms, ST locks, act directly on the
Side ram removal on the T BOP permits reduced stack height and facilitates operating piston tailrod and are interlocked by sequence caps to ensure that
change-out of rams and packers. Sliding the rams to the side simplifies access locks are opened before the BOP is opened.
and handling and reduces vertical clearance requirements. • Bonnet studs instead of bonnet bolts reduce the need to make and break
The T BOP is available in a modular design which greatly reduces stack threads in the BOP body.
height. This design is possible because the side ram removal feature of the T
• Most operating system seals can be replaced with the bonnet in the ram-
BOP allows for construction of a BOP stack with virtually no extra space
change position without removing the bonnets.
between BOP body cavities. Each BOP body or module has only a slightly
raised face and a gasket prep. • The standard T BOP has a large enough piston area to shear all commonly
The design of the T is based on Cameron’s experience with the highly used sizes and grades of drill pipe.
successful U and U II ram-type BOPs and combines much of this proven Other features include hydraulically opening bonnets, forged body and
technology including: a wide selection of rams to meet all applications. See pages 40 and 41 for
• Metal-to-metal bonnet gaskets increase the safety and reliability in critical rams available to fit the T BOP.
service applications.
SD-9599
33
T BOP Hydraulic Control System
The T blowout preventer is designed so that hydraulic pressure opens and Ram closing pressure, shown in the red on the illustration, closes the rams.
closes the rams and provides a means for side ram removal. When the bonnet nuts are released, closing pressure opens the bonnet. When
Ram opening pressure, shown in blue on the illustration, opens the rams and the bonnet has moved to the fully extended position, a ram removal tray is
closes the bonnets after ram change-out. The rams are pulled outward, close to inserted and ram opening pressure brings the rams into the clear for removal.
the bonnets before the bonnets begin moving toward the preventer body. This ST locks are locked by applying pressure, shown in green on the illustration, to
assures that the rams never obstruct the bore or interfere with pipe in the hole. the ST-lock lock port. This pressure wedges a piston-like assembly into position
Hydraulic pressure draws the bonnets tightly against the preventer body and the to ensure that the rams are locked in the closed position. An option is available
bonnet studs are hydraulically tensioned to hold the bonnets closed. Ram where the locks are also locked automatically by installing a sequence valve in
opening pressure is also used to automatically unlock the ST locks. the system.
SD-10806 SD-10806
ST Lock Lock
34
T BOP Dimensions
Both the 13-5/8" 10,000 psi WP and the 18-3/4" 15,000 psi WP T BOPs are D Centerline of preventer to outlet flange or hub face. This distance is
available in single, double and modular configurations. In addition, end variable and must be determined per individual specifications
preparations can be API flange, clamp hub or studded connections. E-1 Top of preventer to centerline of outlet -- flanged
The following designations refer to the T BOP dimensional drawings on this E-2 Top of preventer to centerline of outlet -- Cameron clamp hubs
page: E-3 Top of preventer to centerline of outlet -- studded x flanged
A-1 Length -- bonnets closed, with ST locks E-4 Top of preventer to centerline of outlet -- modular
A-2 Length -- bonnets opened, with ST locks F-1 Top of upper ram to top flange face
A-3 Length -- bonnets closed, locking screws locked F-2 Top of upper ram to top hub face
A-4 Length -- bonnets opened, locking screws unlocked F-3 Top of upper ram to studded face
B-1 Height -- flanged F-4 Top of upper ram to modular face
B-2 Height -- clamp hubs G Height of ram
B-3 Height -- studded x flanged H Centerline of upper outlet to centerline of lower outlet
B-4 Height -- modular J Centerline of upper ST lock (or locking screw) to centerline of lower
C Width -- no side outlets ST lock (or locking screw)
A-3 (Bonnets Closed) A-1 (Bonnets Closed)
▲
▲
▲
▲
▲ ▲ ▲ ▲ ▲ ▲
F
F
E E ▼
▼
G
G ▲ ▲
▼
▼ ▲ ▲ ▲
▲
B J B J
H H
▼ ▼
▼ ▼
SD-8635 SD-8491
▼
▼
C
C
▲
▲
▲
▲
D
▲
▲
D
SD-8635 SD-8492
35
13-5/8” 10,000 psi WP T BOP Part Numbers
9
1
3
6
7
5
8
13
10
SD-10809
11 16
12
36
13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Part Numbers
45
42
43
44
46 59
79 57
50
78 49
86 60
53
37 36
38
39
40
48 41
47
66
61
58
56
55
54
52 51
51
84
73 72
74
SD-10808
85
69 30
65
64
63
62
68 71
67 75
76
77
70
32
31
33
13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Exploded View
34
35
37
18-3/4” 15,000 psi WP T BOP Part Numbers
3
2
4
8
7
5
8
13
10
11
12
17
16
SD-8060
38
18-3/4" 15,000 psi WP T BOP Bonnet Subassembly Part Numbers
49 50
42 45
44 43
46
69 70
60 61 58
61 52 55
37 36 53
38 39
40
48 41
47
62
65
57
56 54
51
51 59
51 52
SD-8061
75 30
76 73 74
78 63
80 79
81 82
83
64
32
31
77
33
34
35
39
T BOP Pipe Rams
Pipe rams are available for use in Cameron T BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the chart on CAMRAM Top Seal
this page. Cameron pipe rams include the following features:
• Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions. CAMRAM Packer
• Ram packers lock into place and are not dislodged by well flow.
Ram Body
• All Cameron T pipe rams are suitable for H 2S service per NACE MR-01-75.
• CAMRAM™ top seals are standard for all T BOP pipe rams.
• CAMRAM 350™ packers and top seals are available for high temperature
service and for service in which concentrations of H 2S are expected.
SD-10824
Wear Pad
Screw
40
T BOP Shearing Blind Rams
Cameron shearing blind rams shear the pipe in the hole, then bend the
4
lower section of sheared pipe to allow the rams to close and seal. Shearing 9 5
blind rams can be used as blind rams during normal drilling operations. 10
Features include of shearing blind rams include:
• Large frontal area on the blade face seal reduces pressure on the rubber and
increases service life.
3 1
• Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
• The single-piece body incorporates an integrated cutting edge.
• CAMRAM™ top seals are standard for all T BOP shearing blind rams. 11
• H 2S SBRs are available for critical service applications and include a blade
material of hardened high alloy suitable for H 2S service. 7
2
• The Cameron SBR has a single-piece body with an integrated cutting edge. 6
9
8
CAMRAM 350 Shearing Blind Ram for T BOP Part Numbers SD-10830
Upper SBR
Item Description 18-3/4" 15,000 psi WP
Lower SBR
2 Right Packer 644893-01
3 Left Packer 644893-02
4 Top Seal* 645068-01
5 Blade Packer 644894-01 T BOP Shearing Blind Ram
*The part numbers listed above are used for both standard
and high temperature applications except for the top seal.
One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the CAMRAM Packer
chart below. All rams listed are suitable for H2S service per NACE MR-01-75. Ram Body
CAMRAM packers and top seals are standard for all T BOP variable bore rams.
The variable bore ram packer contains steel reinforcing inserts similar to those in
the Cameron annular BOP packer. The inserts rotate inward when the rams are
closed so the steel provides support for the rubber which seals against the pipe.
SD-10831
41
TL BOP
The Cameron TL blowout preventer is designed to meet the demand for a • 18-3/4” 15,000 TL BOPs utilize ST locks which are hydraulically
lightweight BOP for offshore and subsea applications. By eliminating separate operated and act directly on the operating piston tailrod and are
bonnets and intermediate flanges, the weight of the TL has been reduced by as interlocked by sequence caps to ensure that locks are opened before the
much as 30% compared to similar models. This is particularly advantageous BOP is opened.
on offshore platforms where weight is critical. By converting to a TL system, an Other features include hydraulically opening bonnets, forged body and a
operator can drill the entire well with one BOP stack replacing the old two-stack wide selection of rams to meet all applications.
system.
The design of the TL is based on experience with the U II and T BOPs and TL BOP Rams
combines much of this field-proven technology including: Rams available for the 5000 and 10,000 psi TL BOP include standard pipe
• Side ram removal and wear pads on the bottoms of the rams. rams as well as Cameron Flexpackers in 5” to 7” and 2-7/8” to 5” pipe sizes.
Also, a DVS shear ram was developed for the TL BOP. The DVS shear ram
• Bonnet seal carrier which eliminates the need for high makeup torque on
is similar to a Cameron shearing blind ram and has two “V” blades for more
bonnet studs and nuts.
effective shearing. During testing, these rams sheared 6-5/8”, 27.6 lb per foot,
• Bonnet studs instead of bonnet bolts to reduce the need to make and S-135 pipe with 2200 psi closing pressure.
break threads in the BOP body. The 15,000 psi TL BOP uses the same field proven rams as the 18-3/4”
• Most operating system seals can be replaced with the bonnet in the ram- 15,000 psi T BOP.
change position without removing the bonnets.
• 18-3/4” 5000 and 10,000 TL BOPs are fitted with hydraulically operating
locking mechanisms, wedgelocks, which lock the ram hydraulically and
hold the rams mechanically closed even when actuating pressure is
released. The operating system can be interlocked using sequence caps
to ensure that the wedgelock is retracted before pressure is applied to
open the BOP.
TL BOP Specifications
BOP Size Weight w/ Wedglocks Weight w/ Wedglocks Weight w/ Lockscrews Weight w/ Lockscrews Height Height Height Height
and Single Double Single Double Single Single Double Double
Working Pressure STD X Flange STD X Flange STD X Flange STD X Flange STD X Flange Hub X Hub STD X Flange Hub X Hub
18-5/8" 10,000 psi 23,100 lb 36,600 lb 21,900 lb 42,400 lb 41.25” 41.12” 67.75” 68.62”
18-5/8" 15,000 psi 38,100 lb 58,400 lb 36,600 lb 55,400 lb 47.37” 51.12” 76.59” 80.25”
BOP Size Length Length Length Length Height Height Height Height
Closing Opening Closing Opening
and Wedglocks Wedglocks Lockscrews Locked Lockscrews Unlocked Single Single Double Double
Volume Volume Ratio Ratio
Working Pressure Bonnets Closed Bonnets Open Bonnets Closed Bonnets Open STD X Flange Hub X Hub STD X Flange Hub X Hub
18-5/8" 10,000 psi 151.00” 184.00” 158.38” 218.38” 20.20 Gallon 19.40 Gallon 10.3:1 3.2:1
18-5/8" 15,000 psi 151.00” 184.00” 164.68” 221.75” 24.30 Gallon 22.40 Gallon 6.7:1 3.1:1
42
TL BOP Dimensions, Weights and Components
18-3/4” 5000 psi WP TL BOP Specifications
*Weight Height Length Bonnets Length Bonnets Closing Opening Closing Opening
Closed Open Volume Volume Ratio Ratio
Single Studded x Flange w/ Wedgelocks 18,700 lb 33.5” 147.10” 180.03” 20.2 gal. 19.4 gal. 10.3:1 2.3:1
Single Studded x Flange w/ Lockscrews 17,500 lb 33.5” 148.0” 207.0” 20.2 gal. 19.4 gal. 10.3:1 2.3:1
Double Studded x Flange w/ Wedgelocks 36,000 lb 59.25” 147.10” 180.03” 20.2 gal. 19.4 gal. 10.3:1 2.3:1
Double Studded x Flange w/ Lockscrews 33,600 lb 59.25” 148.0” 207.0” 20.2 gal. 19.4 gal. 10.3:1 2.3:1
59 24
58
1
8
21
11 22
60 16 15
17
51
61
9
16 17
19 18
56
55
43
52 34
21
20
12
42 13 14
54
10 3
2 32
36 35
44 25 6
23 35
48 5
37
46 61 33
51
40 26
60
50
39 28
49
24
3
30
35
6
31 35
27 29 30
4
38 31
37
7 33
41 43
38
47
7
45 TL BOP Exploded View SD-11128-99
43
UL and UM BOPs
The Cameron UL and UM BOPs are lightweight blowout preventers • Bonnet seal carrier is available to eliminate the need for high makeup torque
designed for easy maintenance and long life. Both designs complement the on bonnet studs and nuts.
existing line of U preventers with interchangeable bonnets which can be • Hydraulically operated locking mechanisms, wedgelocks, are available for
installed on any comparable size U BOP. In addition, the bonnet of the UM subsea applications.
BOP features full stroke operation for one-step ram removal. Other features of • Most operating system seals can be replaced with the bonnet in the ram-
the UL and UM BOPs include: change position without removing the bonnets.
• The UL and UM BOPs utilizes the same rams as the U BOP.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications.
SD-11255-99
UL Blowout Preventer
44
31
23
31
30
UL BOP Components 35
6
3
37
42
32
5
33
34
26
22
35
6
37
4
43
33
34
41
29
28
27
24
38
20
39
46 47
11
12
14
51
10
40
2
36
25
45
DL Annular Blowout Preventer
In the unique design of the Cameron DL annular BOP, closing pressure • Twin seals separated by a vented chamber positively isolate the BOP
forces the operating piston and pusher plate upward to displace the solid operating system from well bore pressure. High strength polymer bearing
elastomer donut and force the packer to close inward. As the packer closes, rings prevent metal-to-metal contact and reduce wear between all moving
steel reinforcing inserts rotate inward to form a continuous support ring of steel parts of the operating systems.
at the top and bottom of the packer. The inserts remain in contact with each • All Cameron DL BOPs are manufactured to comply with NACE specification
other whether the packer is open, closed on pipe or closed on open hole. Other MR-01-75 for H 2S service.
features of the DL BOP include: • Packers for DL BOPs have the capacity to strip pipe as well as close and seal
• The Cameron DL BOP is shorter in height than comparable annular on almost any size or shape object that will fit into the wellbore. These
preventers. packers will also close and seal on open hole. Some annular packers can
• A quick-release top with a one-piece split lock ring permits quick packer also be split for installation while pipe is in the hole. Popular sizes of the
change-out with no loose parts involved. The design also provides visual DL BOP are available with high-performance CAMULAR™ annular packing
indication of whether the top is locked or unlocked. subassemblies. See page 50 for information on high temperature
• The DL BOP is designed to simplify field maintenance. Components subject CAMULAR products.
to wear are field-replaceable and the entire operating system may be The Cameron DL BOP is available in sizes from 7-1/16” to 21-1/4” and in
removed in the field for immediate change-out without removing the BOP working pressures from 2000 to 20,000 psi.
from the stack.
Packer Inserts
Bore of Top
Quick-Release Top
Access Flaps
Packer
Vent
Donut
SD-203-03
Operating Piston
Vent
46
D and DL Annular BOP Dimensions, Weights and Components
47
7-1/16" 3000 - 11" 15,000 psi WP D and DL Annular BOP Part Numbers
7-1/16" 3000 and 7-1/16" 10,000 7-1/16" 15,000 7-1/16" 20,000 11" 3000 and 11" 10,000 11" 15,000
Item Description 5000 psi psi psi psi 5000 psi psi psi
Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No.
3 Piston 1 699333-01 1 699333-02 1 699333-10 1 699333-11 1 699333-03 1 699333-04 1 699333-38
4 Inner Cylinder Head 1 699334-01-02 1 699334-02-02 1 699334-10 1 699334-11-01 1 699334-27 1 699334-28 1 699334-38
5 Outer Cylinder Head` 1 699335-01 1 699335-02 1 699335-10 1 699335-11 1 699335-27 1 699335-28 1 699335-38
6 Pusher Plate 1 699336-01 1 699336-02 1 699336-10 1 699336-11 1 699336-03 1 699336-04 1 699336-38
7 Donut & Packer**** 1 644856-02† 1 644856-03† 1 644856-11-00-01 1 644856-11-00-01 1 644856-04† 1 644856-05† 1 644800-38
9 Lock Ring 1 699337-01 1 699337-02 1 699337-10 1 699337-11 1 699337-27 1 699337-28 1 699337-38
10 Actuator Ring 1 699338-01 1 699338-02 1 699338-10 1 699338-11 1 699338-27 1 699338-28 1 699338-38
11 Actuator Screw 4 49089-03 4 49089-01 4 49089-01 4 49089-01 4 49089-01 4 49089-01 4 49089-01
12 Actuator Screw Bushing 4 699343-03 4 699343-01 4 699343-01 4 699343-01 4 699343-01 4 699343-01 4 699343-01
13 Outer Cylinder Lock Segment - __ - __ - __ 3 614350-02 3 614350-03 3 614350-04 3 614350-09
14 Lock Segment Retaining Ring - __ - __ - __ 1 49416-02 1 49416-03 1 49416-04 1 49416-09
15 Support Plate 1 2010341-01 1 2010341-02 1 049793-15 1 2010341-11 1 2010341-03 1 2010341-07 1 2010341-13
16 Top Trash Seal 1 46045-05 1 46045-06 1 46045-14 1 46045-10 1 46045-11 1 46045-12 1 46045-15
17 Actuator Screw Bearing 8 699344-03 8 699344-01 8 699344-01 8 699344-01 8 699344-01 8 699344-01 8 699344-02
29 Anchor Shackle 4 701002 4 701003 4 663311-13 4 663311-13 4 701004 4 663311-13 4 663311-13
30 Inner Cylinder Stud 8 46037-24 12 46037-16 12 46037-30 12 392002-09-00-70 6 46037-17 8 46037-19 12 46037-26
31 Inner Cylinder Nut 8 49800-01 12 49800-01 12 49800-08 12 49800-03 6 49800-04 8 49800-05 12 49800-05
32 Stud - __ - __ - __ - __ - __ - __ - __
33 Nut - __ - __ - __ - __ - __ - __ - __
34 Lock Ring Access Port Plug 2 5930-04-10 2 5930-05-10 2 5930-07-10 2 5930-07-10 2 5930-05-10 2 5930-07-10 2 614271-03
35 Hydraulic Port Plug 2 5930-04-10 2 5930-05-10 2 5930-05-10 2 5930-05-10 2 5930-05-10 2 5930-05-10 2 5930-06-10
36 Pusher Plate Screw 24 46052-04 24 46052-05 24 46052-08 24 46052-08 24 46052-06 24 46052-07 24 46052-10
37 Actuator Ring Stop Screw 4 46052-03 4 46052-01 4 46052-01 4 46052-01 4 49477-01 4 49477-01 4 46052-01
38 Lifting Eye* 4 700734 4 700734 4 12185-03 4 12185-03 4 11849 4 11849 4 11849
39 Lifting Eye* 4 12185-03 4 12185-03 4 12185-02 4 12185-02 4 12185-03 4 12185-03 4 12185-03
40 Lifting Eye* 4 12185-02 4 12185-02 4 700735 4 700735 2 12185-01 2 12185-02 2 12185-02
41 Lifting Eye* 4 700735 4 700735 4 700734 2 700734 4 12185-02 - __ - __
42 Lifting Eye* - __ - __ - __ - __ 2 700735 - __ - __
43 Stud - __ - __ - __ - __ - __ - __ - __
44 Nut - __ - __ - __ - __ - __ - __ - __
45 Bushing Retaining Screw 4 5940-01-18 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08
46 Oil Injection Fitting 4 700710 4 700710 4 700710 4 700710 2 700594 2 700594 2 700594
47 Lifting Eye* - __ 4 12185-01 - __ - __ 2 701960 - __ - __
50 Support Plate Bearing Ring 1 49122-01 1 49122-02 1 49122-07 1 49122-07 1 49122-03 1 49122-04 1 49122-10
51 Piston ID Bearing Ring 1 2010196-13 1 2010196-15 1 2010196-36 1 2010196-32 1 2010196-17 1 2010196-19 1 2010196-40
52 Inner Cyl. OD Bearing Ring 1 2010196-01 1 2010196-03 1 2010196-33 1 2010196-33 1 2010196-05 1 2010196-07 1 614246-49
53 Outer Cyl. ID Bearing Ring 1 2010196-02 1 2010196-04 1 2010196-34 1 2010196-34 1 2010196-06 1 2010196-08 1 614246-50
54 Piston OD Bearing Ring 1 2010196-14 1 2010196-16 1 2010196-35 1 2010196-31 1 2010196-18 1 2010196-20 1 2010196-39
55 Pusher Plate Bearing Ring 1 699345-04 1 699345-05 1 699345-08 1 699345-08 1 699345-02 1 699345-06 1 699345-10
56 Outer Cyl. ID Wiper Ring 1 700713 1 700810 1 705151 1 705151 1 700619 1 700812 1 706452
57 Inner Cyl. OD Wiper Ring 1 700715 1 700809 1 705152 1 705152 1 700618 1 700811 1 706451
58 Inner Cylinder ID Lip Seal 1 615851-31-01 1 615850-24-01 1 615850-37-01 1 615851-35-01 1 615850-15-01 1 615850-40-01 1 615850-28-01
59 Inner Cylinder ID Lip Seal 1 615851-32-01 1 615851-26-01 1 615851-35-01 1 615850-37-01 1 615850-14-01 1 615850-41-01 1 615850-27-01
60 Inner Cylinder OD Lip Seal 2 615847-30-01 2 615847-26-01 1 615846-26-01 1 615846-26-01 2 615847-17-01 1 615847-38-01 1 615846-21-01
61 Piston ID Lip Seal 1 615851-33-01 1 615851-27-01 1 615851-36-01 1 615851-36-01 1 615851-16-01 1 615851-38-01 1 615850-25-01
62 Piston OD Lip Seal 1 615847-31-01 1 615847-27-01 1 615847-35-01 1 615847-37-01 1 615847-16-01 1 615847-39-01 1 615846-19-01
63 Outer Cylinder ID Lip Seal 2 615851-30-01 2 615851-25-01 1 615850-36-01 1 615850-36-01 2 615851-17-01 1 615851-37-01 1 615850-26-01
64 Outer Cylinder OD Lip Seal 1 615847-29-01 1 615847-25-01 1 615847-32-01 1 615847-36-01 1 615846-04-01 - __ 1 615846-20-01
65 Outer Cylinder OD Lip Seal 1 615847-28-01 1 615847-24-01 1 615847-33-01 1 615847-36-01 1 615846-03-01 1 615846-27-01 - __
66 Top ID Lip Seal 1 615851-29-01 1 615850-23-01 1 615850-35-01 1 615850-35-01 1 615850-13-01 1 615850-38-01 1 615850-29-01
67 Top OD Lip Seal 1 706258-11 1 706258-04 1 706258-01 1 706258-05 1 706258-02 1 706258-03 1 46001-01-42
68 Outer Cylinder ID Lip Seal - __ - __ 1 615851-34-01 1 615851-34-01 - __ 1 615850-39-01 1 615850-28-01
69 Inner Cylinder OD Lip Seal - __ - __ 1 615847-34-01 1 615847-34-01 - __ 1 615846-28-01 1 615846-21-01
75 Inner Cyl. ID Backup Ring* - __ - __ - __ 1 615378-02 - __ - __ 1 615378-01
76 Inner Cyl. OD Backup Ring* - __ - __ - __ 1 615622-02 - __ - __ 1 615378-06
77 Outer Cyl. ID Backup Ring* - __ - __ - __ 1 615378-03 - __ - __ 1 615378-06
78 Top ID Backup Ring* - __ - __ 1 615399-07 1 615378-04 - __ - __ 1 615378-05
*** Complete Replacement Kit 1 49742-01 1 49742-02 1 49742-13 1 49742-03 1 49742-09 1 49742-10 1 49742-14
*Not shown on the drawing
***Seals, bearings and scrapers
****These items are sold as a subassembly (packer and donut).
†CAMULAR™
48
13-5/8" 5000 - 21-1/4" 2000 psi WP D and DL Annular BOP Part Numbers
13-5/8" 13-5/8" 16-3/4" 18-3/4" 18-3/4" 20-3/4" 21-1/4"
Item Description 5000 psi 10,000 psi 3000 and 5000 psi 5,000 psi 10,000 psi 3000 psi** 2000 psi**
Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No.
3 Piston 1 699333-05 1 699333-06 1 699333-18 1 699333-44 1 699333-21 1 699333-47 1 699333-47
4 Inner Cylinder Head 1 699334-05-02 1 699334-30 1 699334-18 1 699334-44 1 699334-21 1 699334-47 1 699334-47
5 Outer Cylinder Head` 1 699335-05 1 699335-30 1 699335-18 1 699335-44 1 699335-21 1 644172-01 1 644172-01
6 Pusher Plate 1 699336-05 1 699336-06 1 699336-18 1 699336-44 1 699336-21 1 699336-47 1 699336-47
7 Donut & Packer**** 1 644856-06† 1 644856-07† 1 644800-18 1 644856-09 1 644856-01† 1 644800-47 1 644800-47
9 Lock Ring 1 699337-05 1 699337-30 1 699337-18 1 699337-44 1 699337-21 - __ - __
10 Actuator Ring 1 699338-05 1 699338-30 1 699338-18 1 699338-44 1 699338-21 - __ - __
11 Actuator Screw 4 49089-01 4 49089-02 4 49089-02 4 49089-04 4 49089-02 - __ - __
12 Actuator Screw Bushing 4 699343-01 4 699343-02 4 699343-02 4 699343-04 4 699343-02 - __ - __
13 Outer Cylinder Lock Segment 3 614350-05 3 614350-01 3 614350-07 3 614350-13 3 614350-06 - __ - __
14 Lock Segment Retaining Ring 1 49416-05 1 49416-01 1 49416-07 1 49416-09 1 49416-06 - __ - __
15 Support Plate 1 2010341-05 1 2010341-06 1 2010341-12 1 2010341-17 1 615483-01 1 2010341-18 1 2010341-18
16 Top Trash Seal 1 46045-01 1 46045-09 1 46045-08 1 46045-18 1 46045-16 - __ - __
17 Actuator Screw Bearing 8 699344-01 8 699344-02 8 699344-02 8 699344-02 8 699344-02 - __ - __
29 Anchor Shackle 4 663311-13 4 663311-13 4 663311-13 4 663311-13 4 663311-13 4 663311-13 4 663311-13
30 Inner Cylinder Stud 6 46037-19 12 46037-20 8 46037-25 16 46037-32 16 46037-27 16 46037-34 12 46037-34
31 Inner Cylinder Nut 6 49800-05 12 49800-05 8 49800-06 16 49800-07 16 49800-07 16 49800-12 12 49800-12
32 Stud - __ - __ - __ - __ - __ 20 5919-08 24 6306-16-10
33 Nut - __ - __ - __ - __ - __ 20 2709000-18-09 24 2709000-15-09
34 Lock Ring Access Port Plug 2 5930-07-10 2 5930-08-10 2 614271-01 2 614271-02 2 614271-01 2 5930-06-10 2 5930-06-10
35 Hydraulic Port Plug 2 5930-05-10 2 5930-06-10 2 5930-06-10 2 5930-06-10 2 5930-06-10 - __ - __
36 Pusher Plate Screw 24 46052-08 24 46052-09 24 46052-09 24 46052-14 24 46052-11 24 46052-15 24 46052-15
37 Actuator Ring Stop Screw 4 46052-01 4 46052-02 4 46052-02 4 46052-02 4 46052-02 4 46052-16 4 46052-16
38 Lifting Eye* 4 11849 4 11849 4 11849 4 11849 4 11849 2 700649 2 700649
39 Lifting Eye* 4 12185-03 4 700649 4 12185-02 4 700649 4 700649 2 12185-02 4 12185-02
40 Lifting Eye* 4 12185-02 2 12185-01 2 12185-01 2 12185-03 2 12185-03 - __ - __
41 Lifting Eye* - __ 4 12185-03 4 700446 4 12185-02 4 12185-02 - __ - __
42 Lifting Eye* - __ 2 700446 - __ - __ - __ - __ - __
43 Stud - __ - __ - __ - __ - __ 36 615447-01-10 24 615447-02-10
44 Nut - __ - __ - __ - __ - __ 36 2709000-19-09 24 2709000-19-09
45 Bushing Retaining Screw 4 702514-25- 4 702514-25- 4 702514-25- 4 702514-25- 4 702514-25- - __ - __
20-08 20-08 20-08 20-08 20-08
46 Oil Injection Fitting 4 700594 2 700594 2 700594 4 700594 2 700594 - __ - __
47 Lifting Eye* - __ - __ - __ - __ - __ - __ - __
50 Support Plate Bearing Ring 1 49122-05 1 49122-06 1 49122-08 1 49122-11 1 615482-01 1 49122-12 1 49122-12
51 Piston ID Bearing Ring 1 2010196-21 1 2010196-23 1 2010196-30 1 2010196-51 1 2010196-29 1 2010196-53 1 2010196-53
52 Inner Cyl. OD Bearing Ring 1 2010196-09 1 2010196-11 1 2010196-25 1 2010196-49 1 2010196-47 1 2010196-54 1 2010196-54
53 Outer Cyl. ID Bearing Ring 1 2010196-10 1 2010196-12 1 2010196-26 1 2010196-50 1 2010196-28 1 2010196-55 1 2010196-55
54 Piston OD Bearing Ring 1 2010196-22 1 2010196-24 1 2010196-42 1 2010196-52 1 2010196-30 1 2010196-56 1 2010196-56
55 Pusher Plate Bearing Ring 1 699345-01 1 699345-03 1 699345-07 1 699345-14 - 699345-13 - __ - __
56 Outer Cyl. ID Wiper Ring 1 700320 1 700319 1 700994 1 708000 1 705710 - __ - __
57 Inner Cyl. OD Wiper Ring 1 700581 1 700320 1 700993 1 708003 1 705711 1 615399-12 1 615399-12
58 Inner Cylinder ID Lip Seal 1 615850-21-01 1 615850-32-01 1 615850-44-01 1 615850-04-01 1 615851-02-01 1 615850-12-01 1 615851-03-01
59 Inner Cylinder ID Lip Seal 1 615850-20-01 1 615850-33-01 1 615850-45-01 1 615851-01-01 1 615850-08-01 1 615851-03-01 1 615850-12-01
60 Inner Cylinder OD Lip Seal 2 615847-22-01 1 615847-40-01 2 615846-27-01 2 615846-05-01 2 615846-16-01 1 615846-18-01 1 615846-18-01
61 Piston ID Lip Seal 1 615851-23-01 1 615850-30-01 1 615850-46-01 1 615850-03-01 1 615850-09-01 1 615850-11-01 1 615850-11-01
62 Piston OD Lip Seal 1 615847-21-01 1 615846-22-01 1 615846-29-01 1 615846-01-01 1 615846-15-01 1 615846-17-01 1 615846-17-01
63 Outer Cylinder ID Lip Seal 2 615851-24-01 2 615850-31-01 1 615850-43-01 2 615850-02-01 2 615850-07-01 - __ - __
64 Outer Cylinder OD Lip Seal 1 615846-11-01 1 615846-23-01 - __ - __ - __ 2 615850-10-01 2 615850-10-01
65 Outer Cylinder OD Lip Seal 1 615846-10-01 1 615846-24-01 1 615846-29-01 1 615846-02-01 1 615846-14-01 - __ - __
66 Top ID Lip Seal 1 615850-19-01 1 615850-34-01 1 615850-42-01 1 615850-01-01 1 615850-01-01 - __ - __
67 Top OD Lip Seal 1 706258-07 1 706258-10 1 706258-09 - __ 1 706258-12 - __ - __
68 Outer Cylinder ID Lip Seal - __ 1 615851-28-01 - __ - __ - __ - __ - __
69 Inner Cylinder OD Lip Seal - __ 1 615846-25-01 - __ - __ - __ - __ - __
75 Inner Cyl. ID Backup Ring* - __ - __ - __ - __ - __ - __ - __
76 Inner Cyl. OD Backup Ring* - __ - __ - __ - __ - __ - __ - __
77 Outer Cyl. ID Backup Ring* - __ - __ - __ - __ - __ - __ - __
78 Top ID Backup Ring* - __ - __ - __ - __ 1 615378-01 - __ - __
*** Complete Replacement Kit 1 49742-11 1 49742-12 1 49742-08 1 49742-16 1 49742-17 1 49742-18 1 49742-18
**Exploded view on page 47 is not representative of this assembly.
***Seals, bearings and scrapers.
****These items are sold as a subassembly (packer and donut).
†CAMULAR™
49
D and DL BOP Replacement Part Kits
For popular size D and DL BOPs, a BOP replacement part kit is available to design will fill most voids created from excessive wear and tear to the seal
provide all seals, bearings and scrapers required during normal maintenance. groove. Seal kits have been created which include all the operating system seals
Kit parts are shrink-film packed to prevent loss and assure long shelf life and for the annular BOPs listed below.
are less expensive than individual parts. All parts in each kit are identified with
part numbers and parts list index numbers.
As an optional replacement for the standard lip seal design, a D-shaped seal
is available for service in annular BOPs that have pitted, corroded or oversized 16
seal grooves. To enhance the performance life of the used annular BOP, this seal 17
56 1 Wiper Ring 51
61
57 1 Wiper Ring
58 1 Seal Ring 54 62
59 1 Seal Ring
60 2 Seal Ring
61 1 Seal Ring
62 1 Seal Ring
63 2 Seal Ring
64 1 Seal Ring
65 1 Seal Ring
66 1 Seal Ring SD-5306
67 2 Seal Ring
D BOP
*Item numbers are standard bill of material numbers for a complete assembly.
Higher Temperatures
For temperatures greater than 250°F and high H2S levels, CAMULAR severe Packer
service elastomer is recommended. The D BOP packing element comes only as
a complete subassembly, which includes packer and donut Contact your local
Cameron representative for details. CAMULAR part numbers are listed on
pages 48-49.
Donut
SD-5306
SD-10821
SD-10822
51
S/QRC and G-2 BOP Rams
Wear Insert Packer
Wear Insert Subassembly
Tubing Safety Packer* Safety Pipe Top Wear Insert Wear Insert Wear Insert Slip Insert
Size Ram Assembly** Packer** Ram Body** Seal** Packer Subassembly** Packer** Subassembly** Subassembly**
Blind 46955-01 46941-01 46938 46950 __ __ __ __
1.050" 46955-02 46941-04 46940-03 46950 614267-01 614262-01 614259-01 614442-01
1.315" 46955-03 46941-03 46940-02 46950 614267-02 614262-02 614259-02 614442-02
1.660" 46955-04 46941-02 46940-01 46950 614267-03 614262-03 614259-03 614442-03
1.900" 46955-05 46942-01 46940-04 46950 614267-04 614262-04 614259-04 614442-04
2.000" 46955-06 46942-02 46940-05 46950 614267-05 614262-05 614259-05 614442-05
2.062" 46955-07 46942-03 46940-06 46950 614267-06 614262-06 614259-06 614442-06
2.375" 46955-08 46942-04 46939-01 46950 614267-07 614262-07 614259-07 614442-07
2.875" 46955-09 46942-05 46939-02 46950 __ __ __ 614442-08
*Includes pipe ram body, top seal and safety packer.
**2 of each required.
Shear Blade
Upper Ram Body
Bolt SD-5219
Blade Retainer
Shear Ram
Shear Ram Part Numbers
(Sealing-Type Shear Ram Available for 4-1/16" and 7-1/16" 5000 psi Not Shown)
BOP BOP Shear Ram Assembly* Upper Ram Body Lower Ram Body Shear Blade Blade Retainer Bolts
Description
Description Qty Part Number Qty Part Number Qty Part Number Qty Part Number Qty Part Number Qty Part Number
4-1/16" 5000 and 10,000 psi G-2 1 614411-01 1 614402-02 1 614402-01 1 614413-01 2 614414-01 4 702585-14-00-24
4-1/16" 10,000 and 15,000 psi S/QRC 1 614411-01 1 614402-02 1 614402-01 2 614413-01 2 614414-01 4 702585-14-00-24
4-1/6" 25,000 psi S/QRC 1 644254-01 1 644253-01 1 644253-02 2 644252-01 2 644252-01 2 701683
*Shear ram assembly includes upper and lower shear rams.
SD-10819
Wireline Packer
Lower Ram Body
Screw**
Wireline Ram
Wireline Ram Part Numbers
(4-1/16" 5000 and 10,000 psi G-2 and 4-1/16" 10,000 and 15,000 psi S/QRC)
Wireline Wireline Ram Upper Ram Lower Ram Top Wireline Wireline
Size Assembly* Body Body Seal Packer Guide
(In.) (1 Required) (1 Required) (1 Required) (2 Required) (2 Required) (2 Required)
0-0.250 614263-06 614236-01 614235-01 46950 46941-10 614264-01
0.312 614263-01 614236-01 614235-01 46950 46941-05 614264-01
0.438 614263-02 614236-02 614235-02 46950 46941-06 614264-02
0.562 614263-03 614236-03 614235-03 46950 46941-07 614264-03
0.750 614263-04 614236-04 614235-04 46950 46941-08 614264-04
0.875 614263-05 614236-05 614235-05 46950 46941-09 614264-05
*Wireline ram assembly includes upper and lower wireline rams.
**Screw part number: 702507-06-00-06.
52
Clamp Connections
Bearing Ring
Load Ring
SD-7039
Nut
53
Manufacturing and Aftermarket Facilities
WESTERN HEMISPHERE
Canada Cameron Germany The Netherlands
Cooper Cameron Corporation 4341 S.W. 33rd Street Cameron GmbH Cameron B.V.
Cooper Cameron Ltd. Oklahoma City, Oklahoma P.O. Box 3225 P.O. Box 121, 9600 AC
5003 93rd Street 73119 29232 Celle, Germany Produktieweg 14, 9601 MA
Edmonton, Alberta T6E 5S9 Tel: (405) 682-1661 Tel: 011+49+5141+8060 Hoogezand, The Netherlands
Canada Fax: (405) 682-1051 Fax: 011+49+5141+806333 Tel: 011+31+598+396200
Tel: (403) 434-3476 Ireland Fax: 011+31+598+396298
Cameron Elastomer
Fax: (403) 437-7397 Technology Cameron Ireland Limited ASIA PACIFIC/MIDDLE
Mexico 29501 Katy Freeway Aghafad, Longford EAST
Cooper Cameron de Mexico, Katy, Texas 77450 Republic of Ireland
S.A. de C.V. Tel: (281) 391-4600 Tel: 011+353+43+45301 Australia
P.O. Box MEB-MX17-390 Fax: (281) 391-4640 Fax: 011+353+43+41560 Cameron Australia Pty. Ltd.
Veracruz, Ver. Cameron Nigeria P.O. Box 519
Mexico C.P, 91707 P.O. Box 10286 Cooper Cameron Corp. Cheltenham 3192
Tel: 011+ 522+981-1008 Highway 90 @ FM 1909 Nigeria Melbourne, Victoria, Australia
Fax: 011+ 522+981-1009 Liberty, Texas 77575 Plot 45 Trans Amadi Ind. Tel: 011+61+39+584-3100
Tel: (409) 336-8811 Layout Fax: 011+61+39+584-6658
South America
Cameron Argentina S.A.I.C. Fax: (409) 336-2822 P.M.B. 995 Cameron Australia Pty. Ltd.
Av. Antartida Argentina 2711 Port Harcourt, Nigeria P.O. Box 1475
EASTERN HEMISPHERE Tel: 011+234+84+331264 Canning Vale 6155
2800 Zarate
Pica., Buenos Aires Fax: 011+2341-2694003 Perth Western Australia 6155
Austria
Repulica Argentina Canada Works Cooper Cameron Corp. Tel: 011+61+9+455-3655
Tel: 011+54+487+22297 Dorenkampgasse 3 Nigeria Fax: 011+61+9+455-3636
Fax: 011+54+487+23404 P.O. B. 24 Ogunu Road Singapore
United States A-1107 Vienna, Austria P.M.B. 1066 Cameron (Singapore) Pte. Ltd.
Cameron Tel: 011+43+1+682-131 Warri, Nigeria No. 2 Gul Circle
600 East 57th Place Fax: 011+43+1+682-133; Tel: 011+871+685052494 Jurong Industrial Estate
Anchorage, Fax: 011+871+6850524946 Locked Bag Service No. 3
England
Alaska 99518-5761 Norway Jurong Town Post Office
Cooper Cameron (U.K.) Ltd.
Tel: (907) 562-2332 Cameron Norway A/S Singapore 2262
Queen Street, Stourton
Fax: (907) 562-3880 P.O. Box 66 Republic of Singapore
Leeds, West Yorkshire
5364 Agotnes Tel: 011+65+861-335
Cameron LS10 1SB England
Bergen, Norway Fax: 011+65+861-6197
P.O. Box 457 Tel: 011+44+113+2701144
Berwick, Louisiana 70392 Fax: 011+44+113+7276778 Tel: 011+47+55+334710
Tel: (504) 395-6171 Fax: 011+47+5+334593
France
Fax: 504) 395-9350 Cameron France, S.A. Cameron Norway A/S
Cameron Plaine Saint-Pierre Mekjarvik 1
P.O. Box 457 CS 620 4070 Randaberg
Highway 90 East 34535 Beziers Cedex, Stavanger, Norway
Patterson, Louisiana 70392 Beziers, France Tel: 011+47+51+415000
Tel: (504) 395-6171 Tel: 011+33+67+111500 Fax: 011+47+51+418160
Fax: (504) 395-1297 Fax: 011+33+67+111600 Scotland
Cameron Gabon Cameron (Great Britain) Ltd.
No. 6 Holloway Blvd. Cameron Gabon S.A. Badentoy Industrial Park
Ville Platte, Louisiana B.P. No. 869 Badentoy Avenue
70586-9778 Port Gentil Portlethen, Aberdeen
Tel: (318) 363-7500 Republique Gabonaise AB1 4YB Scotland
Fax: (318) 363-7516 Tel: 011+241+553026 Tel: 011+44+1224+282000
Fax: 011+241+555897 Fax: 011+44+1224+781800
54
Sales Offices
WESTERN HEMISPHERE
Canada Cameron Cameron Cameron
Cooper Cameron Corporation Balfer Ltd. P.O. Box 114 P.O. Box 901
Cooper Cameron Ltd. Zona Franca Mt. Pleasant, Michigan 48858 Evanston, Wyoming
600, 715 - 5th Avenue S.W. P.O. Box 117-D Tel: (517) 772-5555 82931-0901
Calgary, Alberta T2P 2X6 Punta Arenas, Chile Fax: (517) 773-2842 Tel: (307) 789-2665
Canada Tel: 011+56+61+213931 Fax: (307) 789-4734
Cameron
Tel: (403) 261-2800 Fax: 011+56+61+214379
1020 Hillcrest Drive Cameron
Fax: (403) 262-5181 Cameron Venezolana S.A. Laurel, Mississippi 39440 240 Industrial Boulevard
Cooper Cameron Corporation Apartado 1467 Tel: (601) 649-8900 Rock Springs, Wyoming 82901
Cooper Cameron Ltd. Maracaibo, Venezuela 4001-A Fax: (601) 649-8909 Tel: (307) 382-3134
8614 112 Street Tel: 011+58+61+347231 Fax: (307) 382-3190
Cameron
Grande Prairie, Fax: 011+58+61+349559
5729 Leopard Street, Bldg. 9 Cameron
Alberta T8V 5X4 Ingram Cactus Ltd. Corpus Christi, Texas 78408 P.O. Box 1463
Canada C/o Lifkin De Venezuela Tel: (512) 289-1455 1336 East 335 South
Tel: (403) 539-2333 S.A. Carret A. Perija KM 15 Fax: (512) 289-6251 Vernal Utah 84078
Fax: (403) 539-2334 Maracaibo, Venezuela Tel: (8091) 789-1778
Cameron
Mexico Tel: 011+58+62+47001 Fax: (801) 789-1739
1505 Elm Street, Suite 950
Cooper Cameron de Mexico, Fax: 011+58+61+360087
Dallas, Texas 75201 EASTERN HEMISPHERE
S.A. de C.V. United States Tel: (214) 855-7823
Calle 37 No. 147-A Cameron Fax: (214) 855-0033 Congo
Col. Hector Perez Martinez P.O. Box 3545 Cameron France
Cameron
24100 Ciudad Del Carmen Bakersfield, California 93385 Antenne de Point-Noire
P.O. Box 1212
Camp Mexico Tel: (805) 323-8297/8183 B.P. 5491 Cote Sauvage
Houston, Texas 77251-1212
Tel: 011+ 52+938-27924 Fax: (805) 323-8595 Pointe-Noire Congo
Tel: (713) 939-2211
Fax: 011+ 52+938-27924 Tel: 011+242+945563
Cameron Fax: (713) 939-2620
Cooper Cameron de Mexico, 1238 Alice Street, A Fax: 011+242 +940283
Cameron
S.A. de C.V. Woodland, California 95695 Egypt
P.O. Box 1311
Avenida Homero 1804, Tel: (916) 666-4144 Cameron
Longview, Texas 75606
Ste 403 Fax: (916) 666-5916 Villa El Baraka
Tel: (903) 236-4884
Co. Chapultec Morales No. 8 Road 279
Cameron Fax: (903) 234-0336
11510 Mexico D.F. New Maadi
1700 Broadway, Suite 1400
Tel: 011+52+5+5800296 Cameron Cairo, Egypt ARE
Denver, Colorado 80290-1401
Fax: 011+52+5+395-8869 415 W. Wall, Suite 102 Tel: 011+202+352-0193
Tel: (303) 861-1850
Midland, Texas 79702 Fax: 011+202+352-0495
Cooper Cameron de Mexico, Fax: (303) 837-0408
Tel: (915) 682-4688
S.A. de C.V. England
Cameron Fax: (915) 682-4692
Paseo Villahermosa 701-37 Cooper Cameron (U.K.) Ltd.
201 Energy Center Parkway,
Seccion Lomas Cameron Unit 11, Brinell Way
Suite 402
Fracc. Plaza Villahermosa 270 So. Grandview Harfrey’s Industrial Estate
Lafayette, Louisiana 70508
86179 Villahermosa, Odessa, Texas 79761 Great Yarmouth, Norfolk
Tel: (318) 235-0051
Tabasco Mexico Tel: (915) 337-5475 NR31 OLU England
Fax: (318) 233-8659 (sales)
Tel: 011+52+93-513484 Fax: (915) 337-3001 Tel: 011+44+1493+440438
(318) 981-3322 (service)
Fax: 011+52+93-513484 Cameron Fax: 011+44+493+655405
Cameron
South America P.O. Box 2229 Ingram Cactus Ltd.
650 Poydras St.
Cameron Argentina Mills, Wyoming 82644 Shuttleworth Close
Poydras Center, Suite 2310
Cerrito 1070, Piso 2 Tel: (307) 472-0222 Gapton Hall Industrial Estate
New Orleans, Louisiana 70130
1010 Buenos Aires, Argentina Fax: (307) 265-1318 Great Yarmouth
Tel: (504) 529-7634
Tel: 011+54+811+4000 Norfolk NR31 ONQ England
Fax: (504) 522-8837
Fax: 011+54+811+4009 Tel: 011+44+1493+440444
Fax: 011+44+493+440254
55
Sales Offices
56
CAMERON AND COOPER CAMERON VALVES TERMS AND CONDITIONS OF SALE
1. CONTRACT ACCEPTANCE: its option and its own expense, to answer such claim or threat of suit, assume the control of the defense of said
Any written or oral purchase order received from Buyer by Cooper Cameron Corporation, Cameron suit, and settle or compromise same in any way Seller sees fit. Other than court-awarded judgments as aforesaid
Division and Cooper Cameron Valves (“Seller”) shall be construed as a written acceptance of Seller’s offer Seller shall not be liable for any delays, loss of use or for other direct, indirect, incidental or consequential damages
to sell and shall be filled in accordance with the terms and conditions of sale set forth herein. SELLER’S incurred by reason of any such judgment. Seller does not warrant that such material or apparatus (a) will not
ACCEPTANCE OF THIS ORDER IS EXPRESSLY CONDITIONED ON BUYER’S ASSENT TO THE TERMS CON- infringe any such patent when not manufactured by or for Seller or when specially made in whole or in part to the
TAINED HEREIN. The terms and conditions of Seller’s proposal (if any) and acknowledgement shall prevail Buyer’s design specification and such infringement arises from the inclusion of such specified design or (b), if used
over any conflicting or different terms in Buyer’s order unless Buyer notifies Seller in writing of its objec- or sold in combination with other material or apparatus, or if used in the practice of a process, will not, as a result
tions thereto within fifteen (15) days from receipt of Seller’s acknowledgement. Buyer’s standard terms of of such combination or use, infringe any patent covering such combination or process; and Seller shall not be liable
purchase will not be considered a counteroffer to Seller’s terms and conditions of sale. The failure of Seller for and does not indemnify Buyer for damages or losses of any nature whatsoever resulting from actual or alleged
patent infringement arising pursuant to (a) or (b) above.
to object to any provision in conflict herewith whether contained on Buyer’s purchase order or otherwise
shall not be construed as a waiver of the provisions hereof nor as an acceptance thereof. 11. SELLER’S RIGHT TO MANUFACTURE:
Seller in its sole discretion shall have the right to manufacture the products provided hereunder as far in advance
2. QUOTATIONS AND PRICES:
of its estimated shipping schedule as it deems appropriate. Seller expressly reserves the right to change or modify
All quotations are made for prompt acceptance and any terms quoted therein are subject to change without notice
the design and construction of any product in due course of Seller’s manufacturing procedure without incurring
after thirty (30) days from the date quoted unless specifically stated otherwise on the quotation. Any product, ser-
any obligation or liability to furnish or install such changes, modifications or improvements to products previously
vice capability or manufacturing capability which may be available at the time a quotation is made is subject to
or subsequently sold.
prior sale. Prices quoted are valid for thirty (30) days unless specifically stated otherwise on the quotation and are
subject to change without notice. The price in effect at the time of shipment including any escalation formula will 12. ENGINEERING AND SERVICE:
apply, unless a valid quotation or written agreement to the contrary exists between Buyer and Seller. All prices Upon request, Seller will provide engineering and/or technical information regarding its products and their uses
shown are in U.S. dollars and are F.O.B. Seller s shipping point. Any documentation pertaining to traceability and, if feasible, will provide personnel to assist Buyer in effecting field installations and/or field service. Any such
requirements for raw materials or products or documentation required for any routine or special processes must be information, service or assistance so provided, whether with or without charge, shall be advisory only. In that
identified by the Buyer at the time of quotation (if any) or at the time of order placement. regard, neither Seller nor Buyer assumes any liability for the acts or omissions of the other party except as may be
provided in these terms.
3. TAXES:
Any tax or other charge imposed by law on the sale or production of goods or the performance of services shall 13. LABOR STANDARDS:
be paid by the Buyer, unless the law specifically provides that such payment must be made by Seller, in which case Seller hereby certifies that these products were produced in accordance with all applicable requirements of Section
Buyer shall reimburse Seller for such payment as part of the purchase price. Custom duties, consular fees, insur- 6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the United States
ance charges and other comparable charges will be borne by Buyer. Department of Labor issued under Section 14 thereof.
4. SHIPPING SCHEDULE AND DELIVERY: 14. INSPECTION:
Shipment schedules are given as accurately as conditions permit and every effort will be made to make shipments Unless otherwise agreed in writing, final inspection and acceptance of products must be made at Seller’s plant or
as scheduled. Seller will not be responsible for deviations in meeting shipping schedules nor for any losses or dam- other shipping or receiving point designated by Seller and shall be conclusive except as regards latent defects.
ages to Buyer (or any third party) occasioned by deviations in the shipping schedule, whether due to Acts of God, Buyer’s representatives may inspect at the Seller’s plant or shipping point during working hours prior to shipment
orders bearing priority ratings established pursuant to law, differences with workmen, local labor shortages, fire, in such manner as will not interfere with operations.
flood, shortages or failure of raw materials, supplies, fuel, power or transportation, breakdown of equipment or
any other causes beyond Seller’s reasonable control, whether of similar or dissimilar nature than those enumerat- 15. TITLE:
ed. Seller shall have additional time within which to perform as may be reasonably necessary under the circum- Title to the products sold hereunder passes to Buyer upon payment of the full purchase price.
stances and shall have the right to apportion its production among its customers in such a manner as it may con- 16. TRANSPORTATION CHARGES, ALLOWANCES, CLAIMS:
sider to be equitable. Seller reserves the right to furnish commercially equivalent or better substitutes for materials All prices are F.O.B. Seller’s plant or other designated shipping point.
or to subcontract the Buyer’s order or portions thereof as Seller deems necessary. In no event shall Seller be liable No freight is allowed unless stated in Seller’s quotation (if any) or in a written contract which may exist between
for any consequential damages for labor resulting from failure or delay in shipment. If Buyer requires drawings, pro- Seller and Buyer at the time of shipment. If Seller’s quotation or a written contract states that all or a portion of
cedures, standards or similar material for approval, shipping schedules will be calculated from the time such freight is allowed, all prices are F.O B. Seller’s plant or other designated shipping point, with most economical sur-
approvals are received by Seller, since shipping schedules are based on Seller having all required information and a face transportation allowed. If the quoted or contractual price includes transportation, Seller reserves the right to
firm order from Buyer which is enterable into production. Any hold points, witness points or the need for inspec- designate the common carrier and to ship in the manner it deems most economical. Added costs due to special
tion by Buyer’s representatives must be identified by Buyer at the time of quotation (if any) and/or order placement routing requested by the Buyer are chargeable to the Buyer. Under no circumstances is any freight allowance which
in order that the effect on the prices or shipping schedules (if any) can be taken into account. Additional inspec- is absorbed by Seller to be deducted from the selling price. If the quoted price or contract includes transportation,
tion or testing required by Buyer which affects normal production sequence will be considered as extending the no deduction will be made in lieu thereof whether Buyer accepts shipment at plant, warehouse, freight station, or
shipping dates accordingly. otherwise supplies its own transportation. When sales are made from the Seller’s warehouse, Seller reserves the
5. MINIMUM BILLING: right to charge either actual or pro-rated freight from Seller’s principle point of manufacture to Seller’s warehouse.
Seller reserves the right to impose a minimum billing charge on all sales, change orders or order supplements. Buyer assumes risk of loss upon delivery to the carrier, regardless of who pays shipping costs.
Seller endeavors to pack or prepare all shipments so that they will not break, rust or deteriorate in transit, but
6. TERMS OF PAYMENT: does not guarantee against such damage. Unless requested in writing by the Buyer, no shipments are insured by
Terms of payment for all materials and service are 30 days from invoice date, at net price, provided satisfactory Seller against damage or loss in transit. Seller will place insurance as nearly as possible in accordance with Buyer’s
credit has been established. All unpaid invoices are subject to the maximum legal interest rate per annum com- written instructions but in such case Seller acts only as agent between the insurance company and the Buyer and
mencing with the due date. assumes no liability whatsoever.
Any claims for shipping loss, breakage or damage (obvious or concealed) are Buyer’s responsibility and should be
7. CANCELLATIONS AND RETURNS:
made to the carrier. All claims regarding shortages must be made within thirty (30) days from receipt of shipment
Purchase orders once placed by Buyer and accepted by Seller can be canceled only with Seller’s written consent
and must be accompanied by the packing list(s) covering the shipment.
and upon terms which will save Seller from loss. No products may be returned for credit or adjustment without
written permission from Seller’s office authorized to issue such permission. 17. CONSULAR INVOICES:
Consular fees for legalizing invoices, stamping bills of lading, or other documents required by the laws of any coun-
8. WARRANTIES:
try or destination are not included in quotations or selling prices. If instructed in writing, Seller will make arrange-
All products of Seller’s manufacture are warranted against defects of material and workmanship for a period of
ments for consular documents and declarations as agent of the Buyer, but Seller assumes no liability whatsoever
twelve (12) months from the date of installation or eighteen (18) months from date of shipment, whichever peri-
as a result of making such arrangements. Seller assumes no responsibility for any fines or other charges imposed
od first expires, when such products are used in the service and within the pressure range for which they were
due to errors or incorrect declarations.
manufactured. In the case of products or parts not wholly of Seller’s manufacture, Seller’s liability shall be limited
to the extent of its recovery from the manufacturer of such products or parts under its liability to Seller. 18. INDEMNIFICATION AND LIMITATION OF LIABILITY:
Any repair work performed by Seller is warranted for one year from completion of such repairs and applies only A. INDEMNIFICATION:
to work performed. Seller agrees to indemnify Buyer and hold Buyer harmless against any claims, demands or causes of action for prop-
If, within these specified periods, Seller receives notice from Buyer of any alleged defect in or nonconformance erty damage or personal injury (including death) caused by the negligent act or omission of any employee, agent
of any product or repair and if in the Seller’s sole judgment the product or repair does not conform or is found to or subcontractor of Seller and not contributed to by the negligence of Buyer, its employees, its agents or any third
be defective in material or workmanship, then, Buyer shall, at Seller’s request, return the part or product F.O.B. to party. Seller shall not be responsible for the acts and workmanship of employees, agents, contractors or subcon-
Seller’s designated plant or service location. Seller, at its option and expense, shall repair or replace the defective tractors of Buyer or any third party, nor for failure or malfunction of any tools, materials, equipment, products, sup-
part or product, or repay to Buyer the full price paid by Buyer for such defective part, repair or product. Any repay- plies, facilities or devices not manufactured and supplied by Seller. Buyer agrees to hold Seller harmless from any
ment of purchase price shall be without interest. and all losses, claims, or damages arising from subsurface damage, surface damage caused by subsurface damage,
Seller’s warranty liability, including defects caused by Seller’s negligence, shall be limited to such repair, replace- loss of hydrocarbons and from pollution, regardless of whether such damages, losses or claims were caused by the
ment or refund, and shall not include claims for labor costs, expenses of Buyer resulting from such defects, recov- negligence or sole negligence of Seller, it being the intent of the parties that this indemnity shall apply to proper-
ery under general tort law or strict liability or for damages resulting from delays, loss of use, or other direct, indi- ty of Buyer or to that of any third party.
rect, incidental or consequential damages of any kind. Seller will not be responsible for failures of products which B. LIMITATION OF LIABILITY:
have been in any way tampered with or altered by anyone other than an authorized representative of Seller, fail- UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAM-
ures due to lack of compliance with recommended maintenance procedures or products which have been repaired AGES, INCLUDING, BUT NOT LIMITED TO LOSS OF ANTICIPATED PROFITS, LOSS OF USE OF EQUIPMENT OR OF
or altered in such a way (in Seller s judgment) as to affect the products adversely. THIS WARRANTY IS EXPRESSLY ANY INSTALLATION, SYSTEM OR FACILITY INTO WHICH SELLER’S EQUIPMENT MAY BE LOCATED OR AT WHICH
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE WARRANTY OF MER- SELLER, ITS AGENT OR SUBCONTRACTOR MAY BE PERFORMING WORK. Seller’s total responsibility for any claims,
CHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE WHICH EXCEED THE FOREGOING WARRANTY. damages, losses or liabilities arising out of or related to its performance of this contract or the products or services
covered hereunder shall not exceed the purchase price.
9. NUCLEAR SALES:
The products sold hereunder are not designed or manufactured for use in or with any atomic installation or activ- 19. MODIFICATION, RESCISSION & WAIVER:
ity. If the Buyer or ultimate user of these products intends to use them in such an installation or activity, Seller’s The terms herein may not be modified or rescinded nor any of its provisions waived unless such modification, rescis-
Nuclear Terms of Sale shall be part of and control this contract. Seller will furnish Buyer with a copy of its Nuclear sion or waiver is in writing and signed by an authorized employee of Seller at its office in Houston, Texas.
Terms of Sale upon request. Failure of Seller to insist in any one or more instances upon the performance of any of the terms and conditions
of the contract or the failure of Seller to exercise any of its rights hereunder shall not be construed as a waiver or
10. PATENT INFRINGEMENT:
relinquishment of any such term, condition, or right hereunder and shall not affect Seller’s right to insist upon strict
Seller warrants that the use or sale of material or apparatus sold or rented by it to Buyer hereunder will not infringe
performance and compliance with regard to any unexecuted portions of this contract or future performance of
United States’ patents of others covering such material or apparatus by itself, and hereby agrees to indemnify Buyer
these terms and conditions.
against judgment for damages for such infringement of any such patent, provided that Buyer shall, upon receipt
All orders must be accepted by an authorized employee of Seller. The rights and duties of the parties and con-
of any claim for infringement of any such patent or threat of suit for such infringement or upon the filing of any
struction and effect of all provisions hereof shall be governed by and construed according to the internal laws of
suit for infringement, whichever comes first, promptly notify Seller in writing and afford Seller full opportunity, at
the State of Texas. Any disputes which arise under this agreement shall be venued in the District Court of Harris
County, Texas or in the Southern District of Texas.
CAM/T&C/US/96 CAM-523-F
REV. 2/96
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
© Cooper Cameron Corporation Cameron Division Printed in USA 12/96 TG7.5M TC1001 WR4393