Professional Documents
Culture Documents
2014 Toyota"Fault Code"C1515 "Torque Sensor Zero Adjustment Is Not Complete" Operation Method
2014 Toyota"Fault Code"C1515 "Torque Sensor Zero Adjustment Is Not Complete" Operation Method
2014 Toyota"Fault Code"C1515 "Torque Sensor Zero Adjustment Is Not Complete" Operation Method
图1
Function Instruction:
pic2
Operation Procedure:
Pic6
15. Switch off the ignition,then click “confirm”see as pic7;
Pic7
16.Switch on the ignition again, then click “Yes”,see pic8.
Pic8
17. After the steering wheel stops swinging, press ok, indicating "correction, remaining ** seconds"
as shown in FIG. 9;
pic9
18. It is suggested that "the torque sensor adjustment is completed and the PS warning lamp is
turned off", indicating that the sensor learning success is shown in figure 10.
Pic10
19. Press ok, exit software; Turn off the ignition switch and restart the vehicle test drive system to
restore normal.