Professional Documents
Culture Documents
DRIL-QUIP SpecialtyConnectorCatalog PDF
DRIL-QUIP SpecialtyConnectorCatalog PDF
CONNECTORS
®
TABLE OF CONTENTS
• Quik-Stab 10-13
• Quik-Jay 14-15
• No-Cross 16-17
• Design 18-19
• Testing 20-21
• Fabrication 22
• Facilities 23
• Pipe 24
• Pipe Specifications 25
®
1
SPECIALTY
CONNECTORS
DRIL-QUIP
connectors are designed and
manufactured to
performance.
2
QUIK-THREAD™
CONNECTORS
Two-and-a-half turns make-up
with no cross threading
Quik-Thread Connectors provide
fast make-up, reliable sealing
and versatility to excel in a vari-
ety of drilling applications. Their
rugged thread form and automatic
self-aligning profiles allow for
quick and easy installation in
the field. Quik-Thread connec-
tors can be outfitted with
anti-rotation keys and are avail-
able for driving applications.
FEATURES: Quik-Thread
◆ Easy Stabbing
◆ Self-Aligning
◆ No Cross Threading
◆ Fast Make-up
◆ Low Torque
◆ Visual Indication of
Make-up
◆ High Strength
A fast and reliable means of
running large diameter tubu-
lars in any application.
3
MULTI-THREAD™
CONNECTORS
Five-eighths turn make-up
with no cross threading.
The Multi-Thread connector is
the newest member of the
Quik-Thread line of connectors.
It maintains the field proven per-
formance of the Quik-Thread
design with the advantage of
making up in only 5/8 of a turn.
Multi-Thread
connectors are
ideally suited
for running
large diameter
casing because
they do not
require the use
of power tongs. Multiple thread start.
& Multi-Thread
Multi-Thread connec-
◆ High Pressure Sealing
tors and protectors
◆ Driveable have an identifying
◆ Anti-Rotation Devices groove that easily
Available distinguishes them
◆ Reusable from Quik-Thread
connectors
◆ Fully Tested
◆ Easily Weldable
Exceptional Strength
teep
Reliable Sealing Capacity aper
A resilient seal located in the box pro-
vides reliable high-pressure sealing
capacity. The seal is located below the
threads to prevent pressure migration ligning
through the threaded area for increased rofile
pressure sealing capacity. Dual metal-to-
metal sealing is available as an option.
esilient
eal
®
Quik-Thread & Multi-Thread 5
Positive Alignment
QUICK MAKE-UP
LOW TORQUE
Low final make-up
torque simplifies
installation.
ANTI-ROTATION DEVICES
Quik-Thread and Multi-Thread Connectors are often
used in applications that require the use of anti-rota-
tion devices. These devices prevent connection
back-out or over-torque that may occur as a result of
torsional forces or impact loads.
QT 18-5/8"
E- O
60 R
Rated and ultimate capacities are based on finite element analyses and load test data.
QT/MT 24" 7
.625 25.75 22.00 3.34 5.74 2.58 4.32 5100
6
.688 25.75 22.00 3.34 5.74 2.58 4.32 5550
BENDING (106 ft.-lbs.)
30
.750 25.75 22.00 3.34 5.74 2.58 4.32 6000 5 CO " H
1.00 25.75 22.00 3.34 5.74 2.58 4.32 7900 NN -90
4 EC /H-
QT/MT 26" TO 90D
.625 28.12 24.25 3.61 6.21 3.06 5.08 4650 3 R
.750 28.12 24.25 3.61 6.21 3.06 5.08 5550 1.0 3
1.00 28.12 24.00 3.61 6.21 3.06 5.08 7300 2 0" 0" X
WA -52
LL
QT/MT 30" 1 PIP
E
1.00 32.25 28.00 4.44 7.58 4.38 7.23 6300 0
1.25 32.25 27.50 4.44 7.58 4.38 7.23 6300 0 1 2 3 4 5 6 7 8 H-90 H-90D
1.50 32.25 27.00 4.44 7.58 4.38 7.23 6300 TENSION (106 lbs.)
MT 36"
1.00 37.25 32.12 5.26 9.06 6.01 10.02 5300
1.50 37.25 32.12 5.26 9.06 6.01 10.02 6000
2.00 37.25 32.00 5.26 9.06 6.01 10.02 6000
Other sizes available upon request
Quik-Thread and Multi-Thread connectors are not interchangeable
QT=Quik-Thread, MT=Multi-Thread
Rated and ultimate capacities are based on finite element analyses and load test data.
Quik-Thread & Multi-Thread Technical Specifications 9
1.2
" N
FB N
-6 EC
0.0
0.0 0.5 1.0 1.5 2.0 2.5
FB-60 FB-60D TENSION (106 lbs.)
Rated and ultimate capacities are based on finite element analyses and load test data.
QUIK-STAB™
CONNECTORS Fast make-up with no rotation.
Positive lock, reliable sealing
Quik-Stab connectors provide
and anti-rotation features.
for fast, reliable weight-set
connections of large diameter
tubulars. Their design allows for
high angle stabbing, self aligning
and automatic locking of pin and
box. Quik-Stab connectors are an
excellent choice for applications
which require fast make-up
without rotation.
FEATURES
◆ High-angle stab
◆ Self Aligning
◆ Mechanical release
◆ Requires no rotation
◆ Rugged, high-strength
design
®
Quik-Stab 11
STABBED
AND LOCKED
Connection made
without rotation or
torque. Lock ring
automatically locks
pin and box together
EASILY
RELEASED
Releasing bolts
push lock ring out
of the multiple load
shoulder profile
unlocking the con-
nection
Rated and ultimate capacities are based on finite element analyses and load test data.
Quik-Stab Technical Specifications 13
The CS-90 is a modified Quik-Stab connector that allows fitting built into the bolt assembly. A test port on the box
quick nipple-up and nipple-down of surface pipe and allows external testing of the seals. The CS-90 connector can
wellhead equipment. This connector incorporates captive be manufactured with an internal landing shoulder to
release bolts which can be lubricated through a grease accommodate scab hangers and seals.
Rated and ultimate capacities are based on finite element analyses and load test data.
14
QUIK-JAY™
CONNECTORS
FEATURES
◆ Mechanical, diverless
release
◆ Reusable
◆ Anti-rotation
®
Quik-Jay 15
CAM
POSITIVELY REACTION
LOCKED PLATE
The anti-rotation
key is inserted to
provide a positive
ANTI-
lock between pin
ROTATION
and box. At discon-
KEY
nect time, the key is
removed from the
surface by pulling BOX
up on its cable
PIN
RESILIENT
DIVERLESS TIE-BACK SEAL
Unique design of
profile allows stab-
bing and self
alignment at angles
up to 12 degrees
A Quik-Stab pin
provides for auto-
matic, weight-set
tie-back of the riser
string
Quik-Jay installation
16
NO-CROSS™
COUPLING
Available in
Sizes 13-3/8"
and Smaller
®
No-Cross 17
Buttress Coupling
71
5 field misalignments.
1
Standard API Coupling Cross Threaded
0
0 1 2 3 4 5
Coupling Angle, Degrees
•Standard API Buttress
Coupling Test Results
Test Base
No. Angle Mp (ft-lbs) Fe (lbs) Me (ft-lbs) Mt (ft-lbs) Comments
• DRIL-QUIP No-Cross
Coupling Test Results
Test Base
No. Angle Mp (ft-lbs) Fe (lbs) Me (ft-lbs) Mt (ft-lbs) Comments
5 4° 1538 4000 2000 3538 Full make up with side load applied. Released
side load and disconnected. No thread damage.
6 4° 1538 6000 3000 4538 Same as Test 5. Threads still in good condition.
Mp = Bending Moment at coupling due to pipe joint weight. Fe = External applied side load
Me = Moment at coupling resulting from external applied load Fe Mt = Total Moment = Mp + Me
18
DESIGN
DRIL-QUIP specialty connectors are designed to offer both the section resultant force and locally induced
superior operational and strength characteristics. bending contribute to the stress.
The first step in the design process is the conceptual
development of a connector that provides a fast, safe All specialty connectors are designed to be field-
and efficient means of connecting casing joints compatible with the casing weight and grade to
under worst-case field conditions. Special attention which they are attached.
is given to durability to avoid handling damage
while in transport and/or running into the hole.
Having met these requirements the design is then
refined utilizing computer aided finite element
analyses (FEA) to optimize the connector geometry
regarding both static and cyclic fatigue-type
loadings.
®
19
TESTING
Prototypes of each DRIL-QUIP specialty connec-
tor type undergo extensive function and load
testing. This testing verifies design, structural
and operational specifications.
Functional Testing
Load Testing
®
Field simulated function test
21
Load testing of
D RIL -Q UIP
connectors verifies
rated and ultimate
capacities.
22
FABRICATION
All DRIL-QUIP manufacturing facilities are
equipped to fabricate connectors to casing
joints in accordance with customer specifi-
cations, using qualified procedures that
conform to industry standards.
Welding
Inspection
Traceability
Fast Turnaround
Inventory
®
23
FACILITIES
DRIL-QUIP manufacturing facilities are
D RIL-QUIP strategically located worldwide to pro-
Houston
vide our customers with timely delivery
Hempstead
of products and service. The most mod-
ern numerically-controlled machines are
used in the manufacture of DRIL-QUIP
products to ensure dimensional accuracy
and consistent high quality.
D RIL-QUIP
Singapore
D RIL-QUIP
Norway
®
24
PIPE
DRIL-QUIP stocks pipe of various sizes
and grades to fabricate casing joints
quickly upon customer request. Pipe
stocks are kept in every DRIL-QUIP man-
ufacturing facility for fast delivery
worldwide. Mill certificates are avail-
able for all pipe in stock to ensure
quality and traceability. DRIL-QUIP sup-
plies connectors, pipe and fabrication
for turnkey casing joints of consistent
and verifiable high quality. This trans-
lates into timely deliveries and cost
savings for the customer.
®
25
PIPE SPECIFICATIONS
The chart below provides the strength and application. For every pipe grade and wall
capacities of pipe for frequently requested thickness, there is a DRIL-QUIP connector
sizes and grades. This information can be to match or exceed the strength and capac-
used as a reference to determine the most ity of the pipe.
suitable DRIL-QUIP connector for any
Stavanger, Norway
Sales/Service
Esbjerg, Denmark
Sales/Service
Beverwijk, Holland
Sales/Service
New Orleans
Sales/Service
Houston, TX Singapore
World Headquarters Asia-Pacific
• Manufacturing Headquarters
• Engineering • Manufacturing
• Sales • Engineering
• Service • Sales
• Service
Perth, Australia
Sales/Service
Beverwijk, Holland
Telephone: 31 (0)251 22 92 50
Fax: 31 (0)251 22 00 44
®
Esbjerg, Denmark
Telephone: (45) 7518 0944
Fax: (45) 7518 0640