Professional Documents
Culture Documents
IGARD IEEE 1584 Based Arc Flash Calculator REV2 05dec2009
IGARD IEEE 1584 Based Arc Flash Calculator REV2 05dec2009
Calculator
Rev. #: Rev 1.0
File Name: IEEE 1584 Based Arc Flash Calculator
Date: 28-Nov-09
General Setting
1) To use the arc flash calculator, the user needs to enable the macro setting.
2) To enable the macro setting, open a blank MS Excel.
(a) MS Excel 2003 - Tools --> Macro --> Security… --> Security Level --> Low
(b) MS Excel 2007 - Office Start Button --> Excel Options --> Trust Center --> Trust Center Settings --> Macro Settings --> Enable All Macros
3) Close the blank MS Excel.
4) User only needs to perform the above steps during the first attempt.
5) Click the file to run the arc flash calculator. User will be prompted with a Pop-Up Window, named "IEEE 1584 Based Arc Flash Calculator". (Figure 1)
Instructions
1) Click the file to run the arc flash calculator. User will be prompted with a Pop-Up Window, named "IEEE 1584 Based Arc Flash Calculator". (Figure 1)
c) If the user needs any assistance to use this page, then the user
can click the "Help" button. On the help page, click the
"Close Print Preview" button at top right to return to "IEEE 1584
Based Arc Flash Calculator" page.
e) Click the "Start" button for arc flash calculation (Figure 2).
f) For the subsequent page, if the user needs any assistance then
Figure 1: IEEE 1584 Based Arc Flash Calculator the user can click the "Help" button placed at the top left hand
corner on the page.
IEEE 1584 Based Arc Flash
Calculator
Rev. #: Rev 1.0
File Name: IEEE 1584 Based Arc Flash Calculator
Date: 28-Nov-09
FLOW CHART
Start
End
Welcoming Page
IEEE 1584 Assumptions
Help on protective device
clearing time
Instructions Transformer Nameplate
Data Help on secondary voltage
& transformer capacity
Help on % Impedance
Calculate
No
a) If the user needs any assistance to use this page, then the user
can click the "Help" button placed at the top left corner on the
page. On the help page, click "Close Print Preview" button at top
right to return to "TRANSFORMER NAMEPLATE DATA" page.
b) User can click the "IEEE 1584 ASSUMPTIONS" button to know the
IEEE 1584 standard assumptions.
c) User can click the "?" symbol to find out the range of the value for
the following input data:
(i) Secondary Voltage of the Transformer
(ii) % Impedance of the Transformer
(iii) Transformer Capacity
(iv) Protective Device Clearing Time
e) Equipment tag will be set automatically as the user has already keyed-in the equipment tag at the opening screen.
f) User must select one only of the equipment and grounding systems.
g) The user must click the "CALCULATE" button after keying in all the required informations as mentioned in (d).
h) The user will be prompted with the following question when the user will click the "CALCULATE" button:
1) Do you want to key-in your working distance?
i) If the user has any specific value for working distance, then the user must click the "Yes" button on the pop-up window.
j) When the user will click the "Yes" button,a pop-up window will appear enabling the user to key-in the value for working distance in inches.
k) If the user click the "No" button, then the calculator will use the default value of the working distance for the selected equipment and the voltage class of
equipment as per IEEE 1584.
3) The Arc Flash results will be shown in the new pop-up window, named "ARC FLASH RESULTS". (Figure 3)
a) If the user needs any assistance to use this page, then the user
can click the "Help" button placed at the top left corner. On the
help page, click "Close Print Preview" button at top right to return
to "ARC FLASH RESULTS" page.
f) User can exit this page by clicking the "Main Page" button, to return to "IEEE 1584 Based Arc Flash Calculator" main page.
Figure 4: Printed Arc Flash Results Page