Professional Documents
Culture Documents
00.01 Heko Chain Conveyors 2007
00.01 Heko Chain Conveyors 2007
Figure 8: Figure 9:
Hardness curves for attachments Automatic hardness tester (Protocolling
of hardness values and hardness curve)
7 H E KO
3.2 Special scraper attachment type SP
c
f
b
e
t
a
h i j
g
k l
Figure 10: HEKO Special scraper
attachment type SP
HEKO special scraper HEKO special scraper attachments can be shortened by unbolting one
attachments type SP are are suitable for use with single- and scraper and removal of one (set)
supplied to suit chain to twin-strand conveyors. They can be chain length and attachment.
DIN or other standards. fitted to conveyors with wheels Individual chain links can be removed
having projecting teeth, pocket by cold cutting of the link. Both
■ suitable for horizontal and teeth or toothless wheels. tempered and case hardened attach-
inclined conveyors Scraper centres can be varied by ments are part of HEKO's standard
■ conveying in upper or lower means of the number of chain links manufacturing programme.
trough fitted. Supply can be either loose or The quality of the attachments is
■ simple and economic scraper pre-assembled with the attachments matched with the chain quality. All
attachment and scraper bars. necessary fittings as well as suitable
We recommend the use of high scraper bars, standard or bespoke,
tensile bolts for attaching the scraper, can be furnished by HEKO.
grade 8.8 minimum. Chains which
have lengthened as a result of wear
Table 4: HEKO special scraper bar attachments for chains to DIN or works standard
to suit chain, chain HEKO dimensions/mm bolts/nuts weight HEKO qualities *), MBK (kN)
nominal DIN drawing kg/each tempered hardened
diameter number contact areas
x pitch, HEKO HEKO HEKO HEKO HEKO
d x t/mm a b c e f g h i j k l 31 32 41 5 42
*) stated values refer to use of bolts and nuts grade 8.8, WN = works standard, MBK = min. breaking load, tolerance: table 1
H E KO 8
3.3 Chain shackle type TS and DIN 5699
HEKO shackles are fastened to the We recommend our shackle type TS TS-shackles can be used with wheels
scraper bar by two nuts and a for higher demands as the lip on the having projecting teeth and pocket
securing element. Shackle and distance plate provides support on teeth. Plain wheels can be used as
scraper bar form a stable, simple the wheel rim. return idlers.
form of connection. A wide range of In addition the TS-shackle permits
sizes and qualities is available to suit a much higher breaking load
most applications. compared to the DIN-shackle.
t d2 D
HEKO shackle type TS
S l
pitch to suit chain, weight chain shackle distance plate HEKO-qualities hardened
t/mm nominal kg/each dimensions/mm dimensions in mm tempered contact areas
diameter x complete b2 d2 d1 h a l L D S B HEKO 31 HEKO 32 HEKO 41 HEKO 5
pitch/DIN MBK (kN) MBK (kN)
35 10 x 35 / 764 0,21 10 12 M 10 43 23 13 65 30 12 10 ,5 78 94 54 68
45 13 x 45 / 764 0,34 13 15 M 12 53 28 18 75 30 12 13 132 159 88 110
56 16 x 56 / 764 0,59 16 18 M 14 64 34 23 95 40 12 15 201 241 129 162
63 18 x 63 / 764 0,85 18 21 M 16 71 37 25 110 40 15 17 254 305 170 213
70 20 x 70 / 764 1,25 20 23 M 20 80 42 30 120 50 15 21 314 376 207 259
80 23 x 80 / 764 1,50 23 26 M 20 89 47 30 130 50 15 21 415 498 269 337
91 26 x 91 / 764 2,36 26 29 M 24 99 52 35 150 60 20 25 530 637 339 424
105 30 x 105 / 764 3,06 30 34 M 24 114 60 35 165 60 20 25 706 848 458 574
126 36 x 126 / 764 5,40 36 40 M 30 134 71 45 200 70 20 31 1017 1221 646 810
136 39 x 136 / 764 7,81 39 44 M 36 146 76 50 220 80 25 37 1194 1433 771 950
147 42 x 147 / 764 8,83 42 47 M 36 157 81 50 230 80 25 37 1385 1662 887 1110
Other shackles to DIN 745 or out of DIN available, tolerance: table 1, MBK = min. breaking load
9 H E KO
3.4 Split scraper attachment type BG 22
12.9.
e f
t
Figure 15: Split scraper bar attachments Figure 16: Split scraper bar attachment
for triple strand chain
to suit chain, DIN weight bolts/nuts dimensions/mm case hardened HEKO qualities
nominal diameter chain kg/each HEKO 41 HEKO 42
x pitch, d x t/mm a e f g i k MBK kN MBK kN
10 x 35 764 0,30 M 10 x 45 95 12 10 22 70 45 29 47
10 x 50 762 0,35 M 10 x 60 95 27 10 22 70 45 29 47
13 x 45 764 0,40 M 12 x 55 120 12 13 28 85 60 50 80
13 x 65 762 0,45 M 12 x 75 120 32 13 28 85 60 50 80
16 x 56 764 0,70 M 16 x 65 140 12 16 32 100 70 75 120
16 x 64 WN 0,80 M 16 x 75 140 20 16 32 100 70 75 120
18 x 63 764 0,80 M 16 x 70 145 15 18 35 105 75 95 153
18 x 64 764 0,90 M 16 x 75 145 16 18 35 105 75 95 153
20 x 70 764 1,00 M 16 x 75 150 15 20 35 110 80 118 188
20 x100 762 1,10 M 16 x 110 150 45 20 35 110 80 118 188
23 x 80 764 1,60 M 20 x 90 175 20 23 40 130 85 155 249
Other dimensions and qualities on request, WN = works standard, tolerance: table 1, MBK = min. breaking load
bmin a
f
d
Figure 17:
Lift-in scraper bars type EFS
Table 8: Lift-in HEKO scraper bars type EFS
H E K O 10
3.6 Plug-in scraper bar attachments
type SMG and SMO
HEKO plug-in attachment The attachments are manufactured
from manganese-chrome-alloy steel
■ Fast connection to endless chain strands and are case hardened.
■ Different scraper bar centres possible The connectors can easily be welded
■ Reversible conveying possible to mild steel and low alloy steel. The
■ High service life even under extreme conditions following are suitable welding alloys:
■ Fitted to loose chain MAG: DIN 8559/SG3, E: DIN 1913 E
5154 B10 or equal.
base plate.
c
Figure 19:
Plug-in attachment SMO
Table 9:
HEKO Plug-in attachment type SMG , forged with base plate
HEKO Plug-in attachment type SMO, forged without base plate
Other dimensions and qualities on request. Dimensions ( ) apply only for attachments with threads
11 H E K O
3.7 Sliding block type GL
a c
t e
b f
d
Figure 20:
HEKO sliding block type GL
■ Suitable for horizontal and HEKO slide blocks prevent the chain
inclined conveyors wearing in unwanted areas, resulting
in increased service for the chain.
■ Provide support for the The sliding blocks are available in
scraper bar different material qualities such as
chrome molybdenum steel or cast
■ Guide for chain and scraper
iron.
bar
70 70 130 85 20 21 14 55 1,5
80 80 140 95 25 21 19 55 2,1
91 91 160 100 25 25 17 65 2,3
105 105 180 110 40 25 17 73 3,2
126 126 210 120 45 32 20 83 4,9
to suit chain, DIN weight bolts/nuts dimensions/mm hardened contact area qualities
nominal diameter chain kg/each HEKO 21 HEKO 42
x pitch, d x t/mm a e f g i l MBK (kN) (MBK kN)
13 x 65 762 0,3 M 12 x 60 26 25 10 18 30 12 ,5 66 77
16 x 80 762 0,5 M 16 x 70 31 30 10 20 40 14 ,5 100 120
20 x100 762 0,85 M 16 x 80 30 ,5 40 14 25 50 14 ,5 157 142
23 x120 WN 1,3 M 20 x 90 34 ,5 50 15 30 54 17 207 240
Other dimensions and qualities on request, WN = works standard, MBK = min. breaking load, tolerance: table 1
H E K O 12
3.9 Scraper attachments for endless chain
Figure 22: Individually welded Figure 23: Lift-in scraper bars for use Figure 24: Plug-in attachments type EFL
attachments for use with wheels with with pocket toothed wheels with security pin
projecting teeth, forged and case
hardened.
Figure 25: Welded attachments type AFS Figure 26: Welded attachment for use Figure 27: Welded attachment for
for pocket and projected toothed in abattoir different transport units
wheels for bolting scraper and use in
single and twin strand conveyors
Figure 28: Transport unit for loose Figure 29: Transport unit for forestry Figure 30: Lower trough transport
products, i.e. household waste. products medium for wagons
Figure 31: Plate conveyor used as open Figure 32: Plate belt conveyor Figure 33: Reversible transport catch.
assembly conveyor for tools, etc.
13 H E K O