Professional Documents
Culture Documents
Republic of The Philippines: Engr. Jonathan C. Bulagao
Republic of The Philippines: Engr. Jonathan C. Bulagao
Republic of The Philippines: Engr. Jonathan C. Bulagao
THEORY OF STRUCTURES
University of Eastern Philippines
E10
College of Engineering
CIVIL ENGINEERING DEPARTMENT Prepared by:
University Town, Northern Samar Engr. JONATHAN C.
BULAGAO
PROBLEM 1 4. Find the reaction at the roller support.
Determine the stability of the beam given below. a. 75.50 kN c. 83.50 kN
b. 72.50 kN d. 70.50 kN
5. Find the internal force at member bc.
a. 7.2 kN c. 7.5 kN
b 7.0 kN d. 7.7 kN
a. Statically Indeterminate to 3rd degree
6. If member hi was made up to 2 angles placed back to
b. Statically Indeterminate to 1st degree
back with total area of 650 mm 2, the stress at this
c. Statically Indeterminate to 2nd degree
member is most likely?
d. Statically Determinate
a. 38.5 MPa c. 33.6 MPa
PROBLEM 2
b 43.2 MPa d. 29.1 MPa
Determine the stability of the beam given below.
SITUATION 2
A simply supported prismatic beam is loaded as shown.
EI = 1,000,000 kN.m2
a. Statically Determinate
b. Statically Indeterminate to 1st degree
c. Statically Indeterminate to 3rd degree
d. Statically Indeterminate to 2nd degree
PROBLEM 3
Determine the stability of the frame given below. 7. Compute the deviation at B reference tangent drawn
from A, tB/A.
a. 1.37 mm c. 1.54 mm
b. 1.88 mm d. 1.97 mm
8. Compute the deviation at D reference tangent drawn
from A, tD/A.
a. 0.51 mm c. 0.39 mm
b. 0.63 mm d. 1.13 mm
a. Statically Determinate 9. Compute the deflection of the beam at point D.
b. Unstable a. 0.348 mm c. 0.762 mm
c. Statically Indeterminate to 2nd degree b. 0.631 mm d. 0.513 mm
d. Statically Indeterminate to 13th degree SITUATION 3
SITUATION 1 The non-prismatic simply supported beam below is to
From the truss shown: support the 30 kN.m clockwise torsional moment shown.
EI = 1 x 106 kN.m2
1
Republic of the Philippines EVALUATION
THEORY OF STRUCTURES
University of Eastern Philippines
E10
College of Engineering
CIVIL ENGINEERING DEPARTMENT Prepared by:
University Town, Northern Samar Engr. JONATHAN C.
11. Determine the deflection at point b where 16. Compute the reaction BULAGAO
at C.
the 30 kN.m was applied in mm. a. 15 kN c. 30 kN
a. 0.003815 c. 0.001125 b. 25 kN d. 10 kN
b. 0.0047165 d. 0.0023815 17. Compute the reaction at A.
PROBLEM 2 a. 30 kN c. 25 kN
Determine the stability of the beam given below. b. 15 kN d. 10 kN
18. Compute the horizontal movement at C.
a. 52 mm c. 42 mm
b. 32 mm d. 22 mm
SITUATION 6
a. Statically Indeterminate to 2nd degree A prismatic beam is loaded as shown in the figure. EI =
b. Statically Determinate 1 x 106 kN.m2
c. Unstable
d. Statically Indeterminate to 3rd degree
SITUATION 4
For the continuous beam shown:
2
Republic of the Philippines EVALUATION
THEORY OF STRUCTURES
University of Eastern Philippines
E10
College of Engineering
CIVIL ENGINEERING DEPARTMENT Prepared by:
University Town, Northern Samar Engr. JONATHAN C.
a. 680 c. 868 BULAGAO
b. 564 d. 720
SITUATION 8
For the beam loaded as shown.
3
Republic of the Philippines EVALUATION
THEORY OF STRUCTURES
University of Eastern Philippines
E10
College of Engineering
CIVIL ENGINEERING DEPARTMENT Prepared by:
University Town, Northern Samar Engr. JONATHAN C.
a. 3800 N.m c. 4800 N.m 45. Find the stress in member DF.
BULAGAO
b. 6200 N.m d. 7500 N.m a. 18.5 kips c. 16.5 kips
38. Which of the following gives the distribution factor b. 19.6 kips d. 15.4 kips
for member BA? SITUATION 15
a. 0.20 c. 0.30 From the beam given below.
b. 0.50 d. 0.40
39. Which of the following gives the moment at B?
a. 6510 N.m c. 9053 N.m
b. 4810 N.m d. 7092 N.m
SITUATION 13
A beam having a span of 4 m is supported at the left end 46. Which of the following gives the moment at A?
by a spring which has a spring constant of 60 kN/m. The a. -52 kN.m c. -62 kN.m
beam carries a uniform load of 850 N/m. E = 10,000 b. -42 kN.m d. -72 kN.m
MPa, I = 60 x 106 mm4. 47. Which of the following gives the moment at D?
a. -52 kN.m c. -62 kN.m
b. -42 kN.m d. -72 kN.m
48. Which of the following gives the maximum
deflection?
a. 91/EI mm c. 51/EI mm
40. Which of the following gives the reaction at A? b. 71/EI mm d. 81/EI mm
a. 830.55 N c. 868.09 N
SITUATION 16
b. 845.45 N d. 820.52 N
From the given continuous beam.
41. Which of the following gives the moment at B?
a. -3118 N.m c. -3327 N.m
b. -3456 N.m d. -3221 N.m
42. Which of the following gives the deflection of the
spring?
a. 14.47 mm c. 13.45 mm
b. 13.67 mm d. 12.32 mm
SITUATION 14 49. Which of the following gives the fixed end moment
The cross-sectional area of each member is 1.8 in 2. From at b due to axial load only.
the truss shown. a. 50 kN.m c. 60 kN.m
b. 70 kN.m d. 40 kN.m
50. Which of the following gives the distribution factor
at b for member bc?
a. 30% c. 40%
b. 50% d. 60%