Professional Documents
Culture Documents
Homework 2 14-04-2020
Homework 2 14-04-2020
Homework 2 14-04-2020
U1N 35 kV
= , the primary and secondary winding of the transformer are connected as
U 2 N 10 .5 kV
star and delta respectively. please try to find out
a. The rated line voltage , phase voltage, line current, phase current for the transformer
(4 Remarks)
b. If the load power factor is 0.85 (lagging), then what are the value of the real power
and reactive power of load which the transformer may power (ignore the secondary
voltage varies under load operation condition) (Selective to complete: 2 Remarks)
6) With reference to single-phase transformer diagram in Figure 1, consider that the flux
density inside the center-limb of the transformer core, as a function of time t, is
B ( t )=Bm sin(2 πft ), where Bmis the peak value of the sinusoidal flux density and f is the
operating frequency in Hz. If the flux density is uniformly distributed over the cross-
sectional area Am 2 of the centre limb, determine
Figure 1