Professional Documents
Culture Documents
MX-FXX2: 1. Unpacking
MX-FXX2: 1. Unpacking
1. Unpacking
A. Parts included
Installation
M3 Screw: directions:
Line cable:
2. Installation
<Note before installation>
• Start installation after checking that the LINE indicator and the
DATA indicator below it on the operation panel are neither lit nor
blinking.
A. Turn off the power switches of the main unit. 3) Insert the step screw into the mounting hole of the fax box unit.
1) Turn the power switch located on the operation panel to the 4) Use a screw that has been removed in step 1) to secure the
“OFF” position. fax box unit.
<State of switch>
OFF ON
2) After checking that the operation panel has gone out, open the
front cabinet and turn the main power switch to the “OFF” opsi-
tion.
MX-3100N MX-FXX2 21 – 1
2) Remove the screw from the right rear cabinet and remove the E. Attach the interface cable.
right rear cabinet. 1) Connect the interface cable to the control PWB unit.
[Note] Check that the connector is not obliquely inserted.
2) Push the interface cable into the recessed portion of the sheet
metal on the control PWB unit.
3) Fix a snap band with the bundled M3 screw.
Screw
BOOT
PROGRAM 3) Fit the interface cable into the opening that has been cut.
PCL/BUMON 4) Attach the right rear cabinet cover to the main unit.
BARCODE
At this time, check that the four hooks are properly fitted to the
FAX IMG EXT
main unit.
PS KANJI
MX-3100N MX-FXX2 21 – 2
5) Secure the right rear cabinet with the screw. H. Set the destination and the logo type.
1) Switch the operation panel to the copy mode and use the key
Hook 1 Hook 2 operation [P], [∗], [C], and [∗] to enter the simulation mode.
Hook 3 2) Use the numeric keys to enter [26] in the main code entry
screen shown below and press the [START] key.
Hook 4
Display Description
U.S.A U.S.A.
CANADA Canada
INCH Inch system, other destinations
JAPAN Japan
AB_B AB system (B5 size detectable), other destinations
EUROPE Europe
U.K. U.K.
2) Turn on the main power switch.
AUS. Australia
AB_A AB system (A5 size detectable), other destinations
CHINA China
ON
<State of switch>
OFF ON
MX-3100N MX-FXX2 21 – 3
I. Clear the FAX related software switches. J. Clear the image memory.
1) Switch the operation panel to the copy mode and use the key 1) Switch the operation panel to the copy mode and use the key
operation [P], [∗], [C], and [∗] to enter the simulation mode. operation [P], [∗], [C], and [∗] to enter the simulation mode.
2) Use the numeric keys to enter [66] in the main code entry 2) Use the numeric keys to enter [66] in the main code entry
screen shown below and press the [START] key. screen shown below and press the [START] key.
3) Use the numeric keys to enter [02] in the sub-code entry 3) Use the numeric keys to enter [10] in the sub-code entry
screen shown below and press the [START] key. screen shown below and press the [START] key.
4) Use numeric keys [0] and [1] to enter the desired 8-digit coun-
try code. 4) In the submenu screen shown below, press [EXECUTE] on the
touch panel.
After entry, press [SET], [EXECUTE], and [YES] in this order.
After [YES] on the panel lights up, press it.
MX-3100N MX-FXX2 21 – 4
K. Connect the line cable to the fax box unit.
1) Connect the line cable of the line side to the modular jack indi-
cated with “LINE.”
ǂǂǂ6,08/$7,21ǂǂ12
7(67 &/26(
0$&+,1(6<67(0
0$&+,1(0;* 360;3.;
563)'63)0;53; ;360;38;
67$03$569 6(&85,7<0;)58
'(6.0;'(; $,00;$0;
),1,6+(50;)1; +''ˆˆˆˆˆ0%
)$;0;);; 1,&67$1'$5'
)$;0;)/; %$5&2'($53)
)$;ǂ0(025<$500 )217$53)
+$1'ǂ6(70;+1; ,17(51(7)$;0;):;
1(7:25.ǂ6&$11(50;16; 23(186%0;$0;
MX-3100N MX-FXX2 21 – 5