Professional Documents
Culture Documents
Casca BT Canyon CNA-BTHS01B (Ghid Rapid, EN)
Casca BT Canyon CNA-BTHS01B (Ghid Rapid, EN)
Bluetooth Headset
Quick Guide vl.O
Article: CNA-BTHSOlx
Package Contents
1. BT headset 3. USB2.0charging cable
2. QulckGuideVl. O 4, Warranty Card
Hardware Overview
Specification
EN
• Rechargeable 280mAh Ll-Polvmer Battery: 3.7V 280mA±2mA
• • Charger adapter.output: DC SV
• Mini 5 Pin USB Plug charglng Port
• Minimal charging time: 3 hours
Talk ttme: Up to 4 hours
• Standby time: Up to 250 hours
• Operating Temperature: -10°c - so c 0
Basic Operations
• Please put your mobile phone within lm from your headset.
• Make sure the power of the headset is turned off. Press the Multi-Function
button until you see the blue LED light and the red light will flas.h quickly. There
will be a beep when you let go to Indicate the operatlcn was successful.
Open the Bluetooth function on your mobile phone or PC, and search for the
Bluetooth device (CNA-BTHSOl). If successfully paired, the blue light witl flash
twice every 6 seconds; If failed, please repeat the operation.
When vcu have an incoming call, you wiU hear an indicator scund tn the
headset. Press the Multi-Function power button once to answer, or answer the
call directty with vour mobile phone. Repeat to end the call.
This headset can support last calling recall. Simply press the power button and
hold for 2 seconds.
• To decline an încoming call: Press and hold the centre button for two seconds,
then release. There witl bea beep when you let go to indicate the operation was
successful.
• Enjoy mustc: Press and release the Multi:.function button to Play/Pause the
music. Press Up and release the Multi- function button for the prevîous song or
press Down and releas to listen to the next song. Press the Multi-function button
and hold it Up or Down slowly to adjust the volume.
• For mobile phorres: The music will pause if there is an incoming call, and will
automatically start again when the call ends.
If the headsets disconnect from the PC or mobile device, press the Multi
function button to reconnect within 10 mtnutes so you don't need to pair again.
If the contact was lest for more than 10 minutes, the headset will power off
automatically, which means you will need to start the headsets agaîn.
EN