Operate the hydraulic breaker at the specified engine speed to effectively break rocks without overheating the pistons and valves. Do not lift materials with the breaker as it can damage the tool and be dangerous. Warm up the base machine engine for 5-10 minutes before using the breaker, especially in winter, to ensure proper operation.
Operate the hydraulic breaker at the specified engine speed to effectively break rocks without overheating the pistons and valves. Do not lift materials with the breaker as it can damage the tool and be dangerous. Warm up the base machine engine for 5-10 minutes before using the breaker, especially in winter, to ensure proper operation.
Operate the hydraulic breaker at the specified engine speed to effectively break rocks without overheating the pistons and valves. Do not lift materials with the breaker as it can damage the tool and be dangerous. Warm up the base machine engine for 5-10 minutes before using the breaker, especially in winter, to ensure proper operation.
Operate the hydraulic breaker at the specified engine speed to effectively break rocks without overheating the pistons and valves. Do not lift materials with the breaker as it can damage the tool and be dangerous. Warm up the base machine engine for 5-10 minutes before using the breaker, especially in winter, to ensure proper operation.
Break rocks at the specified engine speed. Raising engine
speed more than necessary does not strengthen hammering force but increase oil temperature to the detriment of pistons and valves.
Lever position during
Hydraulic breaker operation
(set the center to an arrow sign)
Figure 11
Do Not Lift Things With The Breaker.
Lifting materials by hanging wire in the bracket or tool not only causes damage to the breaker but also is very dangerous when operating.
Figure 12
Warm Up Base Machine Engine Prior to
Operation. Especially in winter, the base machine engine should be warmed up for five to ten minutes 30 ~ 40°C (86 ~ 105°F) before breaker operation. Follow the instruction book for base machine to warm up the engine.
Do Not Touch Tool for Breaker Working
During the breaker is working, high temperature of the tool will be generated.