The project log details the construction of a cornhole board over 5 days totalling 15 hours. On the first day they planned the tools and measurements needed (2 hours). The second day they acquired materials from Menards (3 hours). Most of the third and fourth days were spent cutting wood pieces for the frame, legs, and circular hole (10 hours total). On the fifth day they sanded, primed, and clearcoated the board surface letting each coat dry before proceeding (5.5 hours).
The project log details the construction of a cornhole board over 5 days totalling 15 hours. On the first day they planned the tools and measurements needed (2 hours). The second day they acquired materials from Menards (3 hours). Most of the third and fourth days were spent cutting wood pieces for the frame, legs, and circular hole (10 hours total). On the fifth day they sanded, primed, and clearcoated the board surface letting each coat dry before proceeding (5.5 hours).
The project log details the construction of a cornhole board over 5 days totalling 15 hours. On the first day they planned the tools and measurements needed (2 hours). The second day they acquired materials from Menards (3 hours). Most of the third and fourth days were spent cutting wood pieces for the frame, legs, and circular hole (10 hours total). On the fifth day they sanded, primed, and clearcoated the board surface letting each coat dry before proceeding (5.5 hours).
May 22, 2020 6 pm- 8 pm ● What tools we need to build
( 2 hours ) with ● Figure out the measurement of the board ● How we want the board to look like
May 23, 2020 8 am - 11 am ● We went to Menard to find the
( 3 hours ) materials we needed to build the cornhole board
May 24, 2020 8 am - 1 pm ● Cut the woods
( 5 hours ) ● Cut the wood to make the frame ● Cut the wood to make the legs ● We use a cup to get the angle for the legs ● We had to find the center for where the circle goes ● We use the Jigsaw to make the circle
May 25, 2020 8 am - 1:00 pm ● We sanded the surface of the
( 5 hours and 30 minutes ) board and painted the surface with primer ● Primer dries for up to 1 hour. ● After the primer was dry up. We started to add the clearcoat. ● When finishing adding the clearcoat, it had to sit there for 4 hours to dry.