Professional Documents
Culture Documents
Attic Truss Analysis by Finite Element Method Based On 2018 IBC / 2019 CBC
Attic Truss Analysis by Finite Element Method Based On 2018 IBC / 2019 CBC
Attic Truss Analysis by Finite Element Method Based On 2018 IBC / 2019 CBC
CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
Attic Truss Analysis by Finite Element Method Based on 2018 IBC / 2019 CBC
DESIGN CRITERIA
1. The Ix & A of Header, Web, and/or Cripple may be input zero for Triangle trusses. A steel Bot Chord may increase the wood truss capacity.
2. The loads w1, w2, w3, and w4 may be negative (outward) based on IBC/CBC 1605 wind/seismic load combination results.
No. Joint I Sec. Forces (kips, ft-kips) J Sec. Forces (kips, ft-kips)
Element Start, I End, J Axial Shear Moment Axial Shear Moment
1 1 2 0.00 0.00 0.00 -0.01 2.28 -21.63
2 2 3 -5.94 3.95 21.63 5.94 -3.95 4.37
3 3 4 -1.16 -1.98 -4.37 1.16 1.98 -8.68
4 4 5 1.24 0.96 8.68 -1.24 -0.96 6.55
5 5 6 4.29 -1.90 -6.55 -4.29 1.90 0.00
6 6 7 4.81 0.74 0.00 -4.81 -0.74 6.41
7 7 8 2.39 -0.99 -6.41 -2.39 0.99 -9.24
8 8 9 1.59 1.41 9.24 -1.59 -1.41 0.06
9 9 10 0.54 1.10 -0.06 -0.54 -1.10 7.28
10 10 11 0.26 -0.77 -7.28 0.00 0.00 0.00
11 2 13 4.15 -9.51 0.00 -4.15 9.51 13.31
12 10 14 -0.29 11.42 0.00 0.29 -11.42 -3.63
13 4 13 6.61 0.00 0.00 -6.61 0.00 0.00
14 5 7 -2.85 0.00 0.00 2.85 0.00 0.00
15 8 14 2.67 0.00 0.00 -2.67 0.00 0.00
16 12 13 -1.38 -7.28 -114.03 1.38 7.28 -13.31
17 12 14 -1.38 6.72 114.03 1.38 -6.72 3.63
18 3 13 -5.83 0.00 0.00 5.83 0.00 0.00
19 9 14 1.15 0.00 0.00 -1.15 0.00 0.00