Professional Documents
Culture Documents
03-Chapter 3 Cell Related Procedure Analysis PDF
03-Chapter 3 Cell Related Procedure Analysis PDF
03-Chapter 3 Cell Related Procedure Analysis PDF
Table of Contents
i
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
3.1 Overview
This chapter introduces the procedures involved in cell setup and a cell setup
example.
NodeB CRNC
The NodeB uses a resource status indication to report its physical resources to the
RNC. In the following cases, the NodeB triggers the resource status indication
procedure:
z When a local cell is added to the NodeB, that is, it becomes existent
z When a local cell is deleted form the NodeB, that is, it becomes nonexistent.
3-1
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
The resource audit procedure is executed by the CRNC to audit the configuration and
status of the logical resources in the NodeB. A complete audit of a NodeB is
performed by one or more audit procedures and each procedure carries an audit
sequence number. The audit may cause the CRNC to know the logical resources of
the NodeB and re-synchronize its resources with those of the NodeB.
The procedure is initiated with an AUDIT REQUEST message sent from the CRNC to
the NodeB, as shown in Figure 3-2.
z If the [Start of Audit Sequence] information element (IE) in the AUDIT REQUEST
message is set to “start of audit sequence”, a new audit sequence is started, any
ongoing audit sequence shall be aborted, and the NodeB shall provide (part of
the) audit information.
z If the [Start of Audit Sequence] IE is set to ”not start of audit sequence”, the
NodeB shall provide (part of) the remaining audit information not already provided
during this audit sequence.
NodeB CRNC
AUDIT REQUEST
AUDIT RESPONSE
The NodeB responds to the resource audit request of the RNC by an AUDIT
RESPONSE message. The AUDIT RESPONSE message includes information about
physical common channel of logical cell, CCP, local cell, and local group cell. Where,
3-2
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
the local cell and the local cell group information are the abstraction of the NodeB’s
physical resources. In this way, the RNC can distribute the logical resources of the cell
according to the abstract data.
z If the AUDIT RESPONSE message completes the audit sequence, the NodeB
shall set the [End of Audit Sequence Indicator] IE in the AUDIT RESPONSE
message to “End of Audit Sequence”.
z If not all audit information is provided in the AUDIT RESPONSE message, the
NodeB shall set the [End of Audit Sequence Indicator] IE in the AUDIT
RESPONSE message to “Not End of Audit Sequence”.
NodeB CRNC
After receiving the AUDIT RESPONSE message from the NodeB, the CRNC sends a
CELL SETUP REQUEST message to the NodeB if the conditions of cell setup are
satisfied. The NodeB shall set up a new cell according to the parameters included in
that message, as shown in Figure 3-3.
z If the CELL SETUP REQUEST message includes one or more [Secondary
CPICH Information] IEs, the NodeB shall configure and activate the Secondary
CPICHs (SCPICHs) in the cell according to received configuration data.
z The [Maximum Transmission Power] IE value shall be stored in the NodeB and at
any time, the total maximum output power in the cell shall not be greater than this
value.
z If the CELL SETUP REQUEST message includes one or more [Closed Loop
Timing Adjustment Mode] IEs, the value(s) shall be stored in the NodeB and
applied when closed loop feed-back mode diversity is used on DPCH.
When the cell is successfully configured, the NodeB shall store the [Configuration
Generation ID] IE value and send a CELL SETUP RESPONSE message as a
response.
When the cell is successfully configured, there shall be CPICH(s), Primary SCH
(PSCH), Secondary SCH (SSCH), Primary CCPCH (PCCPCH) and BCH. The cell and
3-3
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
the channels are set to Enabled state. When the cell is not successfully configured, the
CELL SETUP FAILURE message shall be sent to the CRNC.
The common transport channel setup procedure is used for establishing the following
channels: Secondary CCPCH (SCCPCH), FACH, PCH, PICH, PRACH, RACH, and
AICH.
NodeB CRNC
Note:
The transport channel synchronization procedure in user plane follows the successful
establishment of downlink common transport channel. After the PCH is established
successfully, the node synchronization procedure in user plane might follow.
The CRNC sends an ALCAP message Q.AAL2 ESTABLISH REQUEST to the NodeB,
requesting for Iub interface user plane establishment. After a successful establishment,
3-4
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
the NodeB responds with an ALCAP message Q.AAL2 ESTABLISH CONFIRM to the
CRNC, indicating the Iub interface user plane is established.
NodeB CRNC
After all common transport channels are set up, the CRNC sends a SYSTEM
INFORMATION UPDATE REQUEST message to the NodeB, as shown in Figure 3-5.
That message includes the system information broadcast in segments on the BCCH
and the scheduling information of each segment.
If the NodeB successfully updates the system information on the broadcast channel
according to the parameters in the SYSTEM INFORMATION UPDATE REQUEST
message, it responds to the CRNC with a SYSTEM INFORMATION UPDATE
RESPONSE message. Otherwise, the NodeB responds with a SYSTEM
INFORMATION UPDATE FAILURE message.
NodeB CRNC
3-5
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
power), and report characteristics (such as On-Demand report, periodic report, and
event report). Upon receipt of the message, the NodeB initiates the requested
measurement according to the parameters in the request.
If the NodeB is able to initiate the measurement requested by the CRNC, it responds
with a COMMON MEASUREMENT INITIATION RESPONSE message sent over the
NodeB control port. If the initiation fails, it responds with a COMMON
MEASUREMENT INITIATION FAILURE message.
The cell reconfiguration procedure is used for an RNC to reconfigure a cell in a NodeB
when the cell parameters need to be modified, as illustrated in Figure 3-7.
NodeB CRNC
3-6
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
The cell deletion procedure is used to delete a cell from a NodeB, as illustrated in
Figure 3-8.
NodeB CRNC
1) The CRNC sends a CELL DELETION REQUEST message to the NodeB. Upon
reception, the NodeB deletes the cell and any remaining common and dedicated
channels within the cell. The states of the deleted cell and common channels
shall be set to Not Existing. The NodeB deletes all radio links and all NodeB
communication contexts within the cell. The NodeB also initiates releasing of the
corresponding transport bearers in the user plane.
2) After deleting the cell, the NodeB returns a CELL DELETION RESPONSE
message as a response.
3-7
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
I. Message Structure
IE/Group name Presence Semantics description
Message Discriminator M –
Message Type M –
Transaction ID M –
Indication Type M –
>No Failure –
>>>Local Cell ID M –
>>>Add/Delete Indicator M –
3-8
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>>>Dedicated Channels M –
Capacity Consumption Law
>Service Impacting –
>>>Local Cell ID M –
>>>Dedicated Channels O –
Capacity Consumption Law
>>>Maximum DL Power O –
Capability
>>>Minimum DL Power O –
Capability
>>>Dedicated Channels O –
Capacity Consumption Law
>>Communication Control –
Port Information
3-9
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>>>Availability Status M –
>>Cell Information –
>>>C-ID M –
>>>Availability Status O –
>>>Secondary CPICH –
Information
>>>>Secondary CPICH M –
Individual Information
>>>BCH Information O –
>>>Secondary CCPCH –
Information
>>>>Secondary CCPCH M –
Individual Information
>>>PCH Information O –
>>>PICH Information O –
>>>FACH Information –
>>>>FACH Individual M –
Information
>>>PRACH Information –
>>>>PRACH Individual M –
Information
3-10
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>>>RACH Information –
>>>>RACH Individual M –
Information
>>>AICH Information –
>>>PCPCH Information –
>>>>PCPCH Individual M –
Information
>>>CPCH Information –
>>>>CPCH Individual M –
Information
>>>AP-AICH Information –
>>>>AP-AICH Individual M –
Information
>>>CD/CA-ICH Information –
>>>>CD/CA-ICH Individual M –
Information
>>>SCH Information O –
Cause O –
3-11
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
II. Example
I. Message Structure
3-12
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
Message Discriminator M –
Message Type M –
Transaction ID M –
Cell Information –
>C-ID M –
>Configuration Generation ID M –
>Availability Status M –
>Local Cell ID M –
>BCH Information O –
>PCH Information O –
>PICH Information O –
>FACH Information –
>PRACH Information –
3-13
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>RACH Information –
>AICH Information –
>PCPCH Information –
>CPCH Information –
>AP-AICH Information –
>CD/CA-ICH Information –
>>CD/CA-ICH Individual M –
Information
>SCH Information O –
>Availability Status M –
>Local Cell ID M –
3-14
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
Criticality Diagnostics O –
3-15
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
II. Example
3-16
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
I. Message Structure
IE/Group name Presence Semantics description
Message Discriminator M –
Message Type M –
Transaction ID M –
Local Cell ID M –
C-ID M Cell ID
Configuration Generation ID M –
UARFCN M –
UARFCN M –
Synchronization Configuration –
>N_INSYNC_IND M –
>N_OUTSYNC_IND M –
>T_RLFAILURE M –
>TSTD Indicator M –
3-17
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>TSTD Indicator M –
>BCH Information –
>STTD Indicator M –
>Power_Raise_Limit M –
>DL_power_averaging_window_siz M –
e
3-18
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
II. Example
3-19
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
I. Message Structure
IE/Group name Presence Semantics description
Message Discriminator M
Message Type M
Transaction ID M
C-ID M Cell ID
Configuration Generation ID M
>>Secondary CCPCH
>>>TFCS M –
>>>TFCI Presence C– –
SlotFormat
>>>Multiplexing Position M –
>>>STTD Indicator M –
3-20
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>>>FACH Parameters –
>>>>ToAWS M –
>>>>ToAWE M –
>>>PCH Parameters
>>>>ToAWS M –
>>>>ToAWE M –.
>>>>PCH Power M –
>>>>PICH Parameters
>>>>>FDD DL Channelisation M –.
Code Number
>>>>>PICH Power M –
>>>>>PICH Mode M –.
>>>>>STTD Indicator M –
>>PRACH
>>>TFCS M –.
3-21
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>>>Preamble Signatures M
>>>Puncture Limit M
>>>Preamble Threshold M
>>>RACH Parameters –
>>AICH Parameters –
>>>AICH Power M –
>>>STTD Indicator M –
>>CPCH Parameters –
>>>TFCS M –
>>>CD Signatures O –
3-22
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>>>Puncture Limit M –
>>>UL SIR M –
>>>Maximum DL Power M –
>>>Minimum DL Power M –
>>>PO2 M –
>>>PO3 M –
>>>N_Start_Message M –
>>>N_EOT M –
>>>>PCP Length M –
>>>>>NF_max M –
>>>>>Channel Request –
Parameters
3-23
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
>>>>NF_max M –
>>>AP-AICH Parameters –
>>>>AP-AICH Power M –
>>>>CSICH Power M –
>>>>STTD Indicator M –
>>>CD/CA-ICH Parameters –
>>>>CD/CA-ICH Power M –
>>>>STTD Indicator M –
3-24
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
II. Example
3-25
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
I. Message Structure
IE/Group name Presence Semantics description
Message Discriminator M –
Message Type M –
Transaction ID M –
C-ID M –
MIB/SB/SIB Information –
>IB Type M –
>IB OC ID M –
>CHOICE IB DeletionIndicator M –
>>NoDeletion –
>>>IB SG REP O –
>>>Segment Information –
>>>>IB SG POS O –
>>>>Segment type C– –
CRNCOriginati
on
>>>>IB SG DATA C– –
CRNCOriginati
on
>>Deletion –
3-26
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
II. Example
3-27
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
This section describes an example of cell setup triggered by the resource status
indication procedure, as illustrated in Figure 3-9.
In this example, two SCCPCHs and one PRACH are set up in the cell. One SCCPCH
bears two FACHs and the other SCCPCH bears two FACHs and one PCH. The
PRACH bears one RACH.
3-28
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
Node B RNC
3-29
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
NodeB RNC
3-30
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
3-31
Protocols and Signalling Analysis
HUAWEI UMTS Radio Access Network Chapter 3 Cell Related Procedure Analysis
3-32