Professional Documents
Culture Documents
Turn The Power Switch On': Test Procedure Test Setup
Turn The Power Switch On': Test Procedure Test Setup
Turn The Power Switch On': Test Procedure Test Setup
10
times
ID Chip P
CR
Sample
Collector
7 Press ‘Select’
2 Insert ID Chip
4 Discard two drops
Detection
Buffer Tube
Test Cartridge 2
drops
3mins
After 3 minutes
3 Press ‘Select’
5 Load the
sample mixture
Reader 2 Assemble the sample
collector with detection 8 Read the test result
buffer tube
Result
2
4 Make a Puncture drops
Important
Rev.00.130530_CRP
Allow ‘Detection Buffer Tube’ to attain
room temperature at least for
30 minutes before performing the test