Professional Documents
Culture Documents
Installation of Set Top Box (STB) Model: S-Box7203
Installation of Set Top Box (STB) Model: S-Box7203
Installation of Set Top Box (STB) Model: S-Box7203
Model: S-Box7203
1
What is STB?
2
Why do we need STB?
Analog Digital
Signal Signal
3
STB hardware Connection Guide
TV
5. Connect the audio cable
STB
4. connect the
6. Connect the power network cable
cord.
1. Connect the power.
2. Connect the
DSL line
3. Turn on the
Modem
HG 510
4
STB Remote
Configuring STB Through
SET Command
5
Displaying the Configuration Page
• By pressing the SET button will get the above login page
6
Configuration main menu
7
• Saving the Configuration
All changes need a password 3008 to be saved. If
"successful!" is displayed, it indicates that the
configurations have been successfully saved. If "password
error!" is displayed, enter the correct password and try to
save again.
8
• 1 - Network Configuration
The STB has three network access modes: Static IP, DHCP, and
PPPoE. We can select one of them so as to match the type
of network access provided at your premises.
9
• Static IP
• Subnet mask
• DNS address
• Gateway address
10
Static IP configuration page
11
PPPoE configuration page
• PPPoE
We need to configure the following parameters:
PPPoE user name : xxxxx@ptcl-iptv
PPPoE password : xxxxx
IGMP version : IGMP v2 (Internet Group Management Protocol)
12
2 - Browser Configuration
13
Browser Configuration
• Home page:
It is the first Web page displayed when the STB is turned on.
Usually, it is the EPG page.
http://203.99.161.14:8082/EDS/jsp/index.jsp.
• Region:
• Select a region, the warning language of STB will be changed to the
language of the region you selected.
14
3 - TV Standard Configuration
15
TV Standard Configuration
• In the TV standard configuration, we can select TV standard and set
video display region and other parameters,
• TV standard:
We can select PAL or NTSC according to the EPG standards the ISP provided
and your local TV standard.
• Top margin:
The margin between the video display area and the top margin of the TV.
• Left margin:
The margin between the video display area and the left side margin of the
TV.
• Width:
The width of the video display area.
• Height:
The height of the video display area.
16
4 - Time Configuration
(NTP - Network Time Protocol)
• Note: Please, insert the correct time zone and NTP, server without these
settings TSTV will not work.
17
5 - Software Information of STB
18
6 - Hardware Information of STB
19
7 - Upgrade Software of STB
This page lists the configuration for the auto upgrade of the STB.
We need to enter the upgrade address, as shown above.
20
8 - Identity Information of STB
21
9 - Restore Parameter
22
CA card Installation
(CA- Conditional Access)
• Smartcard
23