Professional Documents
Culture Documents
Technical Offer ASTM Color and Fuel Dye Analyzer DT-100C, DT-100C-IS
Technical Offer ASTM Color and Fuel Dye Analyzer DT-100C, DT-100C-IS
Technical Offer ASTM Color and Fuel Dye Analyzer DT-100C, DT-100C-IS
ADVANTAGES
• Accurate results in seconds • Automatic downloading of results to
• Dye content accuracy to within 1 ppm user-supplied PC
• Dye content in fuels with ASTM color • Disposable cuvettes and pipettes... No
0.0 through 5.0 messy clean-up.
• Default dye analysis output referenced to • DT-100C-IS measures Solvent Red 24,
the Solvent Red 26 solid dye standard and Solvent Red 19, Solvent Blue 79.
(DT-100C) Markers measured: Solvent Yellow 124,
• Lightweight and portable design for Quinizarin, and Furfural.
laboratory or field use
• Operation from either 120 VAC or
optional NiMH battery pack
The DT-100C-IS provides an accurate measurement of specific dyes and markers in diesel fuels and heating oils
(non-transportation middle distillates). Results are reported on-screen within seconds and can also be
simultaneously exported automatically to a computer via an RS-232 serial port. Dye concentration is reported
units of mg/L or mg/Kg. Dyes measured are: Solvent Red 24, and Solvent Red 19, Solvent Blue 79. Markers
measured: Solvent Yellow 124, Quinizarin, and Furfural.
Solvent Red 26
Solvent Red 24
Solvent Red 19
Solvent Blue 79
MARKERS:
THE TECHNOLOGY
The DT-100C utilizes the latest visible laser and LED photometric techniques to accurately read red dye
concentration while correcting for the ASTM color of the un-dyed base fuel. Thus, accurate dye content analyses
are obtained even when the presence of dye cannot be discerned by the naked eye.
The power button turns the DT-100C on and off. If the DT-100C is left on and is not used for a period of about ten
minutes, it will automatically shut itself off in order to conserve power. Pressing the power button again will
awaken the instrument.
The mode button allows the user to select analysis results are displayed. In the default mode, the DT-100C
supplies results in concentrations of parts per thousand barrels and parts per million of Active Red Dye
referenced to the solid dye standard: Solvent Red 26. Pressing the mode button allows the user to translate
analysis results into treat rates based on many popular commercial dye products. The mode can be changed at
any time before or after the analysis is completed.
The DT-100C features a four line by twenty character LCD display. Each line on the display has a separate
function, as outlined below:
The sample chamber is located at the top right corner of the front panel. The sample chamber contains all of the
optical hardware in the DT-100C and it is here where the spectroscopic analysis takes place. It accepts
disposable PetroSpec cuvettes and is sealed against accidental spills.
GENERAL INFO
DT-100C
ASTM Color and Fuel Dye Analyzer
DT-100C-IS
Standard Test Methods D6756, D1500, D6756
OPERATION
Analytical principle Laser and LED photometrics (Visible Spectroscopy)
Sample Size 4 ml minimum
Analysis & Results
Each unit is factory calibrated. Verification samples are available to check for proper
Precalibrated
performance.
User interface 4 lines x 20 character LCD with backlight
Automatic export via rs 232 serial port; 9600
Communication
Baud, 8 bits, 1 start, 1 stop, no parity
Design Construction
Electromagnetic
89/336/EEC
Compatibility Directive
Low Voltage Directive 73/23/EEC, 93/68/EEC
ENVIRONMENTAL CONDITIONS
Operating temperature +40°C to 5°C (104°F to 41°F)
Humidity 0% to 90% RH
Storage temperature -40°C to 85°C (-40°F to 185°F)
PHYSICAL SPECS
Dimensions 6” x 7.5” x 2.5” (15 x 20 x 10 cm)
Weight Approximately 2 lbs, (0.9 kg)
3. System Configuration
Ordering No. Description
DT-100C
DT-100C-IS
Includes:
Component Part Part Description Quantity
BTDT-100C
520-150-010 DT/JT 120VAC Pwr Adapter 1
BTDT-100C-IS
240-200-001 Cuvettes 6
240-201-001 Pipette Disposable Dt 100 Ea-200 6
520-350-002 DT100/100C Operating Manual 1
For DT-100C-IS
520-150-011 DT/JT 240VAC Pwr Adapter 1
81025 Power Cord Shuko C13 240V 1
5. Consumables