Professional Documents
Culture Documents
ROMER CimCore Product Catalog PDF
ROMER CimCore Product Catalog PDF
Configurations and descriptions subject to change without notice. The latest version of this catalog is
available at www.romer.com or www.cimcore.com under Accessories in the Products section. This
catalog is provided as a supplement to the Price List. Please refer to the Price List for complete
product details with supplemental notes.
ROMER CimCore 51170 Grand River Ave. Wixom, MI 48393 USA Ph: (248) 449-9400 Fx: (248) 449-9445
11149
Supravision Software Package
Includes; software, manual, dongle, WinRDS (tube probe and
Supravision calibrated length standard sold separately) and training.
11541
PowerINSPECT Software Package for International
Distribution
Includes: free PowerINSPECT software upgrades for one year, WinRDS,
dongle and choice of VDA or IGES translator.
12533-ASSYWT
Data Overlay Camera System for Tube Inspection
Includes: software CD, manual, dongle, WinRDS (tube probe and
calibrated length standard sold separately) and training.
31595
PowerINSPECT Lite Software Package
Includes: software upgrades for one year, WinRDS and training. Manual
not included.
31596
PowerINSPECT Lite for International Distribution
Includes: free PowerINSPECT Lite software upgrades for one year,
WinRDS and dongle.
32216
TooLOK Software Package
Sold with an arm, includes a dongle and software.
CAD-MAN
PC-DMIS CAD Manual Software Package
Includes: WinRDS, dongle, upgrades for 1 year, IGES, DXF, DWG,
STEP203, STEP 214, VDAFS, XYZIJK, DES and DMIS I/O translators,
electronic manual and training. Quoted for new systems only. (NOT
SOLD IN ALL MARKETS)
PRO-MAN
PC-DMIS PRO Manual Software Package
Includes: WinRDS, dongle, upgrades for 1 year and training. Quoted for
new systems only. (NOT SOLD IN ALL MARKETS)
20688
Calibration Sphere
25.4 mm (1 in.) calibration probe sphere - used to calibrate the
PowerProbe™.
21821-xx
STINGER II™ Six Axes Portable Arms
Includes: counterbalance, WinRDS™, carrying case, NIST traceable
calibrated length standard, documentation, point tip / 6 mm ruby / 15 mm
ball probes and a one-year standard warranty. Calibrated with
counterbalance only.
25526-xx
INFINITE Seven Axes Portable Arm
Includes; integrated counterbalance, re-chargeable Li-ION battery and
Wi-Fi wireless interface, pistol grip combination seventh axes scanning /
hard probe wrist assembly with infinite rotation, WinRDS, travel case,
magnetic base, 13 pin - point tip / 15mm master probe / 6mm ruby
carbon shaft probes for the center plug of scanning head, NIST traceable
calibrated length standard and a 1 year warranty. 9 pin probes that are
required for hard probing when a scanner is mounted to an arm must be
ordered separately. Does not include pictured laser camera. HighRES™
reverse engineering software included with shipment to NAFTA
customers.
30030
Certified Length Standard - Short
For calibrating arms up to 2.7 m (9 ft.).
30031
Supravision™ Calibrated Length Standard
Supravision™ certified length standard. 25.4 mm (1.0 in.) tee for 25 mm
(.98 in.), 75 mm (2.95 in.), 100 mm (3.93 in.) and 150 mm (5.90 in.) tube
probes. 25.4 mm (1 in.) diameter.
30047
Quick Change Puck for 1000i™ Arm
30050
Brunson Stand, Small
Brunson Stand Model 231- small, adjust from 711 mm to 1066 mm (28 in.
to 42 in.), weighs 83 kg (183 lbs.). Specify Point or Pad feet. (direct
mount of INFINITE arm, other arms require mounting adapter # 31660).
30051
Brunson Stand, Large
Brunson Stand Model 230 – large, adjusts from 1092 mm to 1701 mm
(43 in. to 67 in.), weighs 118 kg (260 lbs.). Specify Point or Pad feet.
(direct mount of INFINITE arm, other arms require mounting adapter #
31660).
30154
Certified Length Standard - Long
For calibrating arms 3 m (10 ft.) and longer.
30237
Supravision™ Calibrated Length Standard
Supravision™ certified length standard – 6.35 mm (.25 in.) tee for 6 mm
(.23 in.) tube probes.
30826
Brunson Stand - Portable
Carbon Graphite Model - height adjusts from 711 mm - 1320mm,
includes shipping container. Specify Point or Pad feet. Stand weighs 18
kg. (INFINITE not supported)
31198
Riser for STINGER II™
355 mm (14 in.) for tube inspection station.
31505
Inspection Table
Inspection Table - 1200 mm wide x 1829 mm long with M6 on 25 mm grid
threaded holes, 711 mm legs (assembly required).
31660
Brunson Aluminum Adapter Plate
Brunson Mounting Adapter – provides: direct mounting of the STINGER
II™ (square, 4-hole pattern), mounting for a 1000i puck, mounting for a
3000i puck.
32032
Probe Box
Wooden box for standard probe set. Probes not included.
32054
Foot Pedal Switch
An external switch that plugs into the rear of either the 3000i Series or
STINGER II Series arm (requires a female to female gender adapter for
STINGER II arms).
32121
Battery Pack
Powers 3000i and STINGER II arms.
32190 to 32192
Brunson Stand Model 230-F24, F-26 or F-48
Fixed heights of 609 mm (24 in.), 914 mm (36 in.) or 1219 mm (48 in.).
Specify Point or Pad feet. (direct mount of INFINITE arm, other arms
require mounting adapter # 31660).
32753 to 32754
Foot Petal Switch for INFINITE Arms
32753 for INFINITE arms with USB camera support. 32754 for INFINITE
arms without USB camera support.
50861- 4, 6, 8, 9, 12
Zero-G Counterbalance™ for 3000i™ Series arm
A 30326 arm calibration is required to use the counterbalance. The arm
must be shipped to ROMER for calibration.
51025
Quick Change Puck for 3000i™ Series arm
51460
GridLOK™
GridLOK™ 4 x 6 meter (13' x 19') Installation - in concrete slab or steel
plate, includes calibration, start-up, GridLOK Positioning Software,
dongle and portable stand with laptop arm / tray.
51593
GRIDLOK™ Demo Plate
Plastic plate with conical seats used for demonstrating GRIDLOK™
operation.
51809
Brunson Stand for GRIDLOK™ system
Brunson Stand for GridLOK™ system – includes laptop support arm /
tray. Available in black only, assembly required. Height is 580 mm (22.8
in.) from floor to arm mounting surface.
51818
SpaceLOK™ – permanently assembled
SpaceLOK™ - permanently assembled - for 2.4-, 2.8-, 3.0- or 3.6 m (8-,
9-, 10- or 12 ft.) arms. Includes: WinRDS™, documentation and dongle.
51819
SpaceLOK – portable model
SpaceLOK™ - portable model - for 2.4-, 2.8-, 3.0- or 3.6 m (8-, 9-, 10- or
12') arms. Includes: WinRDS™, carrying case, documentation and
dongle.
52007
Vertical Magnetic Base
For 3000i and STINGER II (3000i requires #51025 Quick Change Puck,
sold separately).
52458
Magnetic Base for INFINITE Arms
Includes 3 magnets.
52460
Round Adapter Plate for INFINITE Arms
71193
Mounting Adapter
3000i™ base to 1000i™ mount, includes Quick Change Puck for 3000i™
arm.
101826
Magnet for 3000i Seven Axes Arm Calibration
101826-2
Magnet for INFINITE Seven Axes Arm Calibration
A2304
Leap Frog Kit
Set of four magnets used for leap frogging.
CH5000A - E - U
Battery Charger for INFINITE Arms
ND2017
Battery for INFINITE Arms
7.2 V Li-Ion
30004
Non-Contact Tubing Probe
6 mm (.236 in.) non-contact tubing probe.
30010
Punch Probe
A spring-loaded probe designed especially for layout of sheet metal or for
hole centers on fabricated parts (approximate working length 116.5 mm.)
30106
Non-Contact Tubing Probe
25 mm (.98 in.) non-contact tubing probe.
30110
Non-Contact Tubing Probe
150 mm (5.9 in.) non-contact tubing probe.
30297
Tube Probe
100 mm (3.9 in.) non-contact tubing probe.
51678-01,03, 05, 07
Ruby Tip Probe
Ruby tip probe (approximate working length 50 mm.)
51678-10, 13
Steel Ball Probe
10 mm and 15 mm steel ball probe (approximate working length 50 mm.)
51678-12, 15
Steel Ball Probe
10 mm and 15 mm steel ball probe (approximate working length 180 and
185 mm.)
51678-16, 17
Point Tip Probe
Point tip probe (approximate working length 50 mm and 85 mm.)
51678-19
Tooling Ball Probe
12.7 mm, designed to measure the center of tooling balls (approximate
working length 51.5 mm.)
51678-21
Edge Probe
Edge Probe (approximate working length 51.5 mm.)
52529-06
15mm Ball Probe for 7 Axes Arms
Carbon graphite shaft for use in the center (13 Pin) location of the
scanning head wrist assembly
52529-07
6mm Ruby Ball Probe for 7 Axes Arms
Carbon graphite shaft for use in the center (13 Pin) location of the
scanning head wrist assembly
52529-08
Point Probe for 7 Axes Arms
Carbon graphite shaft for use in the center (13 Pin) location of the
scanning head wrist assembly