Professional Documents
Culture Documents
Hope For Aero Engineers
Hope For Aero Engineers
It cannot be denied that Filipino Aeronautical Engineers are now gainfully employed in many
airline and aviation companies here and abroad. Their job functions range from aircraft
mechanics and release engineers to aircraft instructors, flight dispatchers and pilots. The
Aeronautical Engineering profession is now deeply entrenched in the aviation industry that
Aeronautical Engineers have become indispensable in their jobs. In doing so, the question on
whether Aeronautical Engineers can contribute to the aviation industry in promoting safety
and generating income has now become moot and academic. Aeronautical Engineers have
proven themselves to be more than capable.
Going back to 1978, Presidential Decree (PD) No. 1570 was signed by the late President
Ferdinand Marcos, officially recognizing the Aeronautical Engineering profession and
regulating those who want to practice in this field of engineering. Of the 36 sections
comprising PD 1570, there are two sections, Sections 27 and 28 which clearly define, and set
limits to, the functions of Aeronautical Engineers. These sections actually make Aeronautical
Engineers what and who they are.
Section 27 states that: “The practice of Aeronautical Engineering shall constitute in holding
out oneself as skilled in the knowledge, science, and practice of Aeronautical Engineering, and
as qualified to render professional services as an Aeronautical Engineer; or offering or
rendering, or both, on a fee basis or otherwise, services such as planning, designing,
analyzing, constructing, assembling, installing, altering or maintaining of aircraft
structures, power plants or accessories through scientific or accepted engineering practice,
or the teaching of the same in any university, college, institute, or school of learning duly
recognized by the Government of the Philippines” [emphasis added].
Section 27 practically overlaps the established job functions of aircraft mechanics as provided
for in Republic Act (RA) 776 and implemented by Administrative Order (AO) No. 04A during
the time of the now defunct Air Transportation Office (ATO). This particular provision has
been a headache to both Aeronautical Engineers and aircraft mechanics alike as each is
claiming that the job of installing, altering or maintaining of aircraft structures, power
plants or accessories is the other’s own jurisdiction by legal right. The aircraft mechanics
group of course would not relinquish its own profitable job; it is theirs by first right and they
have been doing that for years. The Aeronautical Engineers group by virtue of the newer PD
1570 has been insisting that they have now the authority to sign papers pertaining to
maintenance release of aircraft, power plants, and parts. In effect, PD 1570 has superseded the
authority of RA 776 when it comes to the above-mentioned functions.
Also, Article III, Section 2 of said IRR, states that “All firms, corporations, offices, educational
institutions, and agencies, whether government of private, whose activities in part or in full
involve the operation of one (1) or more aircraft…shall employ the services of Aeronautical
Engineers. Planning, design, operation, management or maintenance of airports and their
related facilities…shall require professional Aeronautical Engineering services.”
Against this background, past officers of SAEP and the Board of Aeronautical Engineering
(BAeE), in countless meetings and consultations with the officials of the former ATO, tried
various approaches to harmonize the provisions of PD 1570 and RA 776. It is in this context
that, at long last, a Memorandum of Agreement (MOA) was signed on March 8, 2005
between the PRC/BAeE and ATO. And, one year later, on March 1, 2006, the ATO issued
Memorandum Circular (MC) 01-06, to implement the provisions of the MOA; in effect,
implementing PD 1570. However, said MC was short-lived: it was suspended on April 20,
2006 and later on, was nullified and withdrawn on August 2, 2006. Obviously, major players
in the aviation industry vehemently opposed MC 01-06.
Looking back, MC 01-06 required practically any aviation company and institution to require
the services of Aeronautical Engineers: all engineering reports which contain analysis,
plans/drawing, and substantiations of any civilian aircraft undergoing major repair,
alteration, and/or modification, shall be signed by a registered Aeronautical Engineer. In
addition, aircraft checks like performance, weight and balance, symmetry and alignment, and
other checks affecting the performance and structural integrity of the aircraft, shall be
conducted under the supervision and control of registered Aeronautical Engineers.
These particular provisions of MC 01-06 clearly place into the hands of Aeronautical
Engineers the major job descriptions of aircraft mechanics and aircraft engineers (other than
Aeronautical). This means, as far as aviation companies and airlines are concerned, revising
their operating manuals and procedures to accommodate the provisions of MC 01-06; which,
of course, involves time, resources and money. However, the law needs to be implemented.
Nevertheless, MC 01-06 never saw implementation.
Just for the record, former BAeE chairman Engr. Amando Villao sent a letter of inquiry to the
ATO on June 14, 2006, requesting enlightenment on the temporary suspension of MC 01-06;
The withdrawal of MC 01-06 was a serious setback for the full implementation of PD 1570
through the police power of the ATO. It turned to nothing all the efforts that have been spent
in formulating the MOA and the MC. In the meantime, another project by the SAEP and
BAeE was underway: the revision of PD 1570, which hopefully would put more teeth into the
Aeronautical Engineering law and clarify the ambiguous line between the functions of
Aeronautical Engineers and aircraft mechanics.
The final draft of the revised PD 1570 was submitted to the 13th Congress on March 29, 2006
and was introduced in the House of Representatives as House Bill (HB) No. 5410 under the
sponsorship of former Rep. Francis “Blueboy” L. Nepomuceno of the first district of
Pampanga, and chairperson of the House Committee on Civil Service and Professional
Regulation.
The provisions of HB 5410, tentatively called “The Aeronautical Engineering Act of 2006,” are
more encompassing in scope and details than PD 1570. For example, the HB has five (5)
major activity areas. Aircraft Operation and Maintenance under PD 1570 is separately listed
as Aircraft Operation and Aircraft Maintenance under HB 5410. Moreover,
Aeronautical Engineering practice includes planning, designing, analyzing,
constructing, assembling, installing, altering, maintaining, or operating of aircraft, its
structures, powerplant or accessories. The word “operating” has been added in the HB
whereas “operating of aircraft” as part of Aeronautical Engineering practice is found only in
the Implementing Rules of the PD.
As regards maintenance, Section 22 (c) and Section 35 of the HB, states, among others, that
“All reports, plans, specifications, drawings, designs and other related documents, pertaining
but not limited to, major structural repair, major structural modifications,
major system repair and modifications, operational limitations, aircraft
performance classifications, weight and balance data limits and
computations, shall bear the signature and seal of registered and licensed Aeronautical
Engineer.”
While PD 1570 does not specifically identify which areas of work need the approval of
Aeronautical Engineers, its IRR state so, albeit in general terms: Article I, Section 1 (I) (3) only
refers to “The operation of aircraft or the maintenance, repair, and
modification/alteration of aircraft structures, powerplant, and other aircraft
components.”
Therefore, it is agreed in the final draft of the HB that all major structural repairs, major
structural modifications, major system repairs and modifications, operational limitations,
While we put our hope on the HB, the ATO was given a facelift through RA 9497, which
transformed ATO into Civil Aviation Authority of the Philippines (CAAP). One good news for
Aeronautical Engineers was that RA 9497 included the word Aeronautical Engineer in its
definition of airman. This is tantamount to recognizing the importance of the functions of
Aeronautical Engineers in aviation, which is just putting our place in the proper perspective.
However, in the formulation of its IRRs and Civil Air Regulations (CARs), the duties and
responsibilities of the IRRs were intentionally left out because it is the jurisdiction of the BAeE
and PRC to formulate the job functions of Aeronautical Engineers.
Where can you find the specific provisions in PD 1570 and its IRRs the duties and
responsibilities of Aeronautical Engineers? Again, let us reiterate here.
of aircraft structures, power plant, and accessories through scientific or accepted engineering
practice.
Also, Section 28 (b) of PD 1570, stipulates that any firm or company engaged in
Designing
Planning
Construction
Installation
Alteration
Manufacture
Marketing
of aircraft and its components, accessories, instruments, equipment, and supply should have
the
Certification
Supervision
Guidance
of an Aeronautical Engineer.
Also, Article II, Section 2 of the IRR pertains to services provided by Aeronautical Engineers.
It requires all firms and institutions, whether government or private, whose activities involve
the operation of one (1) or more aircraft or the practice of Aeronautical Engineering shall
employ the services of Aeronautical Engineers.
It also includes
Planning
Design
Operation
Management or
Maintenance of airports & related facilities.
In closing, it is helpful to remember this statement from the Civil Aviation Safety Authority
(CASA) of Australia about Aeronautical Engineers and maintenance engineers:
“Aeronautical Engineers are engaged in the design, development, testing and production of
civil and military aircraft. The maintenance engineer deals with those in-service and
maintenance practices and principles necessary that keep an aircraft operational.”
“... any modification or repair that is carried out on an Australian aircraft must be done in
accordance with 'approved data'. This approved data is usually contained within the aircraft
manuals (aircraft maintenance manual, structural repair manual, component maintenance
manuals, etc.) issued by the aircraft manufacturer. However, sometimes there is damage to
the aircraft that is outside the scope of these manuals or the operator wishes to modify
the aircraft to help it perform a specific function (aerial firefighting, search and
rescue, for example) or alter the aircraft in some other way. To ensure that the aircraft
continues to be airworthy (i.e., safe to fly), the repair or modification must be examined by an
Aeronautical Engineer so that the many complex factors that affect aircraft flight, structures
and systems can be assessed and the design change approved as airworthy. To do this, the
Aeronautical Engineer assesses the design of the modification or repair against the
airworthiness requirements for the aircraft and then must justify that the design meets these
requirements through the use of analysis, testing and experience.”
There’s no other simpler explanation than this regarding the job description of an
Aeronautical Engineer.