Professional Documents
Culture Documents
1612 - Hi-Brite Reflective Road Studs - Introduction
1612 - Hi-Brite Reflective Road Studs - Introduction
1612 - Hi-Brite Reflective Road Studs - Introduction
• These RRPMs (road studs) have been compression tested to meet the
requirements of the Australian Standard (exceeds AS1906.3).
• These RRPMs pass at twice the required compression (DOTSA Testing
Laboratory).
• Installed around 12 million pieces in Australia in the past 10 years.
• Uses bituminous adhesive.
• No road damage during replacement (unlike shaft, no holes are created
under the RRPM)
Adroit Global Solutions Sdn Bhd
Hi-Brite RRPM/Road Stud Design
• The RRPM uses an Air Gapped lens, and when damaged or
cracked, they only lose those cells that are damaged, the rest
of the lens still reflects (unlike metalised reflective marker
which fails totally once cracked)
The Applicator