Professional Documents
Culture Documents
Bomba Javeriana
Bomba Javeriana
Prepared For:
Daniel M. Ruiz V.
Pontificia Universidad Javeriana
Calle 40 No. 5-50 Sótano
Bogota, Colorado 1111
Phone: (571) 320-8320 Ext 5269/5373
Email: daniel.ruiz@javeriana.edu.co
Quotation Number: 2015-23331 Javeriana 515.180 S3
Quotation Date: June 26, 2017
Quotation is valid for: 60 Days
Currency: US Dollar
Estimated Shipment Schedule: 8 Months (ARO)
Billing Plan: 40% on Order - 60% on Shipment
Payment Terms: Net 30 Days
Shipment Terms: FCA MTS US Factory - MTS US Factory
Freight: Collect
Equipment Packed For: Ocean Freight
MTS Proprietary Information. The information and design(s) disclosed herein are the property of MTS
Systems Corporation and may not be used, reproduced or disclosed in any form except as granted in
writing by MTS Systems Corporation. MTS will retain all rights in its technologies, concepts and
improvements to its products.
Quotation
Quotation Number: 2015-23331 Javeriana 515.180 S3
Estimated Shipment Schedule: 8 Months (ARO)
Billing Plan: 40% on Order - 60% on Shipment
Payment Terms: Net 30 Days
Shipment Terms: FCA MTS US Factory
Summary:
Description Net Price
1.0 - Quantity 1 x MTS SilentFlo™ System Assembly $125,520.00
Description
1.0 - Quantity 1 x MTS SilentFlo™ System Assembly
• Flow rates of 340 lpm (90 gpm) for 60 Hz models, and 300 lpm (80 gpm) for 50 Hz models
at 210 bar (3000 psi) with three bays available for future expansion
• Noise rating of 72 dB(A)
• Variable volume pumps help save energy and reduce operating costs
• Designed to eliminate ambient heat load, reducing HVAC requirements
• Compact design fits through a standard doorway
• Optional Remote-Mounted Water shut-off valve saves water when the unit is shut down.
• Efficient heat transfer technology reduces cooling requirements with standard air and
water cooling options
• Advanced programmable logic controls (PLC) enable options for control and monitoring
• Engineered for remote monitoring and multi-pump control options
• High pressure filter available for additional system filtration at the outlet of the pump
• Output accumulation available for HPU models 515.20 through 515.180
• Designed and tested to relevant EN, ISO, NFPA, and CAN/CSA standards for electrical
safety and electromagnetic compatibility (EMC); CE compliant; TÜV-Rheinland certified
MTS Onsite Installation, Training and Calibration are not included in this Quote. These services
will be provided by the Business Partner. Exceptions may apply.
Total Price
Bottom Line Discount $12,552.00
Final Price USD $112,968.00
Commissioning
Customer Responsibilities
Facility Requirements
Certain site preparations may be required to insure a successful and timely installation of your new
equipment. Please review our Site Prep Guides to verify what specific preparations are required for your
new equipment. Our Site Prep Guides can be found on our website at: http://www.mts.com/en/services/
Manuals/index.htm. The customer should perform a detailed review of the machine specifications to
assure that the facility where the machine will be installed has an appropriate sized dock to accommodate
the dimensions of the MTS system being purchased. The path that the system will take to its final
destination should be measured to verify that the entry into the building, any doorways, elevators, or
stairways that the machine must travel through, will accommodate the dimensions of the purchased MTS
system. The customer should have appropriate moving equipment available to position the machine.
Please pay close attention to the fork-lift handling instructions that accompany the shipment.
Equipment & Personnel
The customer will provide suitable equipment and personnel to unload and set in place all items in this
quote, prior to the arrival of the MTS installation engineer. It is the customer's responsibility to ensure the
system is handled and manipulated per the packing instructions. The customer may need an overhead
crane or other lifting device for use in the installation and assembly of system components, as well as the
routine setup of test system fixturing.
Power
Electrical power for MTS supplied equipment will be provided by the customer. All wiring from power
supply to the MTS equipment is customer supplied. This electrical supply should be free from power
transients caused by other equipment on the circuit. This includes appropriate electrical power for the
hydraulic power supply (HPS) as well as a fused disconnect when an HPS is purchased. The desired
HPS voltage must be specified at the time of the order.
Water
If a hydraulic power supply with a water-to-oil heat exchanger or water-cooled accessories is purchased,
a cooling water supply and drain of sufficient capacity is required. The cooling water lines shall be
provided and connected by the customer.
Environment
Environmental requirements are indicated in the associated product literature. If purchased, the hydraulic
power supply will require a room with adequate ventilation to ensure the maximum temperature for the
room does not exceed 104 degree F (40 degree C). The electronic components and computer equipment
should be located in a suitable environment with respect to temperature, humidity, and dust.
Specimens
Documentation
Standard Products and Standard Systems
Manuals for standard products and standard systems are available from the MTS web site. You will also
find software reference information (in English only) to support the Operator Guides provided with
standard MTS systems.
Software
MTS controller software provides electronic documentation accessible from the application or, in some
cases, from the Start menu. Software documentation includes basic user interface, operation, and test
design. Additional software reference documentation for the entire feature set of the controller software is
available from the MTS web site in English only.
Access to Documentation
Documentation is available online through an MTS Echo account. Refer to the Manuals tab at http://
www.mts.com/en/services/index.htm.
Language
For European Community – MTS will provide translated operation manuals. Specify the required language
when placing the Purchase Order.
For all other countries – MTS provides documentation in English. Translation into major languages is
available for many standard products and system-level documentation. Contact MTS Systems for
availability and price for your required language.
Vendor Manuals
One set of vendor manuals to be provided (as supplied by the vendor).