Professional Documents
Culture Documents
Counter Flow Induced Draft: Series
Counter Flow Induced Draft: Series
Corproate Profile
Since founded in 1972, The
MESAN Group has engaged in
designing and manufacturing
evaporative cooling equipment,
and supplying air-conditioning
equipment to the Commercial
and Industrial HVAC markets.
MESAN products are designed
with excellence always in mind.
Thermal performance, energy
efficiency, environmental consciousness and cost effectiveness are the goals of our research and
development engineers, as well as our Management and staff.
1
Overview
The MKT series is a cost-effective, induced-draft counterflow cooling tower. Its round shape makes
it an allaround performer, under any prevailing winds direction, it also allows for low restriction to
airflow resulting in very low energy consumption.
The tower casing is made with high quality FRP material provides maximum corrosion resistance.
All the steel components are HDG S with SS304 or SS316 is available for superior corrosion
resistance. The fill is of rigid Poly Vinyl Chloride (PVC) with the additional drift eliminators prevent
the water droplets and keep drift losses to less than 0.001% of the re-circulating water flow rate.
The MKT series is available in 34 models with capacities ranging from 6 m3/h to 1000 m3/h. Low
Noise, Super Low Noise & Low Drift models are available to meet your requirements.
Model Designation
MKT 100 L S4
2
MKT SERIES
Tower Structure
Motor Reducer
Ladder
Fan Guard
Fan Guard
Motor Support
Casing
Springkler System
Infill Support
Float Valve Assembly Suction Tank
Component
Motor
TEAO type, IP55 enclosure, class F insulation, high
efficiency, and low noise. Specially designed to operate
within the high-humidity environment of a cooling tower.
Fan
High efficiency axial aluminum alloy fans with innovative
low dray, aerodynamic airfoil blade design, adjustable pitch
blades and low-noise.
Note: Models MKT-6 to MKT-60 use ABS plastic fans.
Structural Frame
Our structure made of hot-dipped galvanized steel steel or SS-304/316 stainless steel (optional) to
minimize rust and corrosion.
Infill
Infill design maximizes the contact surface, allowing for improved heat transfer between water and air,
while offering the lowest resistance to air flow, for reduced pressure drop and lowest energy consumption.
3
Product Technical Data
MKT-6~80 H
MKT-90~150 MKT-175~450 MKT-500~1000
H
Do Do Do Do
MKT-6~80
Note:
1 Secure the base of the cooling tower with the anchor bolts.
2 Buyer is responsible for the tower support and for the positioning and diameter of the anchoring bolts to comply with local building codes.
7
Foundation and Piping
Note:
1 Secure the base of the cooling tower with the anchor bolts.
2 Buyer is responsible for the tower support and for the positioning and diameter of the anchoring bolts to comply with local building codes.
8
www.mesanct.com
sales@mesanct.com