Professional Documents
Culture Documents
Grove TMS800E PDF
Grove TMS800E PDF
product
guide
features contents
•Form41-128 ft. (12.6-39 m) 4 section full power Mega
boom
Features 2
• 33-56 ft. (10-17 m) manual offset bi-fold
swingaway Specifications 3
• 2 x 20 ft. intermediate lattice inserts
Dimensions 5
• 24,000 lb. (10 886 kg) counterweight
with hydraulic removal system Travel Proposal 6
•after
Cummins ISM 450, six cylinder
cooled 450 hp (336 kW) Working Range 7
•suspension
Front and rear air ride Main Boom and
Swingaway Charts 9
Swingaway Charts
w/one or two 20' inserts 23
Load Handling 30
For improved up and over reach, a Standard front & rear air ride suspension
bifold lattice extension is available on provides comfortable ride at max speed of
2 the TMS800E and manually offsets 65 mph (105 Km/h)
from 0˚ to 40˚.
Superstructure
Boom Swing 3
41 ft. - 128 ft. (12.5 m - 39 m) four section, full power MegaForm Axial piston fixed displacement motor and planetary gear box.
boom. Infinitely variable to 1.7 rpm. Holding brake and service brake.
Maximum Tip Height: 135 ft. (41.1 m).
Counterweight
Boom Nose 8,000 lbs. (3 629 kg) consisting of various sections with
Four nylatron sheaves, mounted on heavy duty tapered roller hydraulic installation/removal system.
bearings with removable pin type rope guards. Quick reeve *Optional “Heavy Lift” package consisting of (1) 4,000 lb. (1 814
boom nose. Removable auxiliary boom nose with removable pin kg) and (1) 6,000 lb. (2 722 kg) section, for a total of 18,000 lb.
type rope guard. (8 165 kg).
*Optional “XL” counterweight package consisting of (1) 6,000 lb.
(2721 kg) slab, (1) 4000 lb. (1814 kg) slab and (2) 3,000 lb.
Boom Elevation (1361 kg) wing weights in addition to standard; for a total of
Single lift cylinder with safety valve provides boom angle from -3˚ 24,000 lb. (10886 kg) of counterweight.
to +78˚.
Hydraulic System
Offsettable Lattice Extension 1 piston and 3 gear type pumps with a total capacity of 179 gpm
33 - 56 ft. (10 - 17 m) bifold lattice swingaway extension, manual (678 l/m). Maximum operating pressure, 4000 psi (27.6 MPa).
offsettable at 0˚, 20˚ and 40˚. Thermostatically controlled oil cooler keeps oil at optimum
Maximum tip height: 191 ft. (58.2 m) operating temperature.
Tank capacity: 183 gal. (693 l)
*Lattice Jib Extensions
Two 20 ft. (6.1 m) inserts for use with lattice swingaway extension
Hoist
to increase length up to 76 ft. (23.2 m) or 96 ft. (29.3 m). Main and auxiliary hoist are powered by axial piston motor with
Maximum tip height: 230 ft. (70.1 m) planetary gear and brake. “Thumb-thumper” hoist drum rotation
indicator alerts operator of hoist movement.
Load Moment & Anti-Two Block System
Single Line Pull: 1st Layer: 20,250 lb. (9 185 kg)
Standard “Graphics Display” load moment and anti-two block 3rd Layer: 17,010 lb. (7 716 kg)
system with audio-visual warning and control lever lockout. 5th Layer: 14,660 lb. (6 650 kg)
These systems provide electronic display of boom angle, boom
length, radius, tip height, relative load moment, maximum Maximum Line Speed: 514 FPM (157 m/min)
permissible load, load indication and warning of impending two-
block condition. The standard “Work Area Definition System” Maximum Permissible Line Pull:
allows the operator to pre-select and define safe working areas. 16,800 lb. (7 620 kg) 6X36 rope
If the crane approaches the pre-set limits, audio-visual warnings 17,160 lb. (7 784 kg) 35X7 rope
aid the operator in avoiding job-site obstructions.
Rope Diameter: 3/4 in. (19 mm)
Cab
Rope Length: 600 ft. (183 m) Main Hoist
All aluminum constructed cab with acoustical lining,
607 ft. (185 m) Auxiliary Hoist
hydraulically tiltable (0˚ to +20˚). Includes tinted safety glass,
adjustable operator’s seat, sliding windows in side and rear,
Rope Type: 6 x 36 EIPS IWRC, Special Flexible
hinged skylight with wiper, skylight sunscreen. Other features
35 x 7 Flex-x, Rotation Resistant
include hot water heater/defroster, armrest integrated dual axis
crane controls, and ergonomically arranged instrumentation.
Maximum Rope Stowage:
841 ft. (256 m)
TMS800E
Carrier
4 Chassis Lights
Triple box section, four-axle carrier, fabricated from high strength, Full lighting package including turn indicators, head, tail, brake,
low alloy steel with towing and tie-down lugs. and hazard warning lights.
Tires
Front: 445/65R 22.5 tubeless, mounted on aluminum disc wheels.
Rear: 315/80R 22.5 tubeless, mounted on aluminum disc wheels.
dimensions
R46’
R45’ (13981) R15’ TAIL SWING (4504)
R55’ R50’ (13779) OUTSIDE
(16852) R53’ (15290) TURNING CURB
(16184) 28o
RADIUS CLEARANCE
R54’
(16460) 7.58’ 24.00’
5
(2312) (7315)
8.59’ RET. FULLY
(2618) 15.42’ EXT.
OVERALL 8.49’ (4700)
(2587)
CARRIER MID
MAX. EXT.
6.94’ 6.26’
(2117) 32o R32’ (1907)
FRONT (9855) REAR
TRACK INSIDE CURB TRACK
CLEARANCE
49.81’
(15182) 14.76’
41.34’ RET. (4498) 6.00’
.93’
(284) (12600) (1828)
14.59’ 1.37’ 7.22’ 3.16’ 2.83’
.19’ (4446) (416) (2200) (964) (863)
2.89’ ROTATION
(58) (882)
3.21’
(978) 3.75’
(1143)
5.21’
(1588)
11.15’ 1.46’ 11.24’
(3398) (445) (3426)
1.63’ 8.32’ CARRIER
(497) (2537) BRG PLATE 10.03’
2.56’ 7.39’ (3056)
(781) 4.11’
(2253) (1254) 4.82’
5.86’ 1.04’ (1468)
(1786) 16o (318) 1.67’
1.76’
2.08’ STROKE
(536) 20o (510)
(635)
5.00’ 5.00’ .79’ 1.18’
(1524) 2.87’ (1524) (241) (361)
18.50’ (873)
4.15’ (5639) 9.42’ 1.67’ STROKE
13.17’ 8.92’ 1.73’ (508)
(1264) 8.66’ (4013) (2870) (2718) (526)
(2641) 37.37’
(113911)
63.1’
6
Gross
90,706 lb.
Additions:
8,000 lb. (3 629 kg.) counterweight stowed on the chassis deck
10,000 lb. (4 536 kg.) counterweight stowed on the boom dolly
(17 705 kg.) (15 821 kg.) (15 808 kg.) (49 334 kg.)
load charts
41.3-128' main boom + 33-56' lattice extension
220
7
210
200 0o
20o OFFSET 56' EXT
190 OFFSET
o
40
OFFSET
180
33' EXT
170
160
150
70o
140 128
60o
130 120
50o
120 110
110 100
40o
100 90
90 80
30o
80 70
70 60
60 20o 50
50 41.3
40
10o 78o
30 MAX.
BOOM
ANGLE
20
10 0o
0
190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10
AXIS OF
ROTATION
118.95
[9’-11”] Dimensions are for Largest Grove furnished Hook Block
and Overhaul Ball, with Anti-Two Block Activated.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
M i n i m u m b o o m a n g l e ( d e g .) fo r i n d i c a te d l e n g th ( n o lo a d ) 9
Maximum boom length ( ft.) at 0 deg. b o o m a n g l e ( n o l o a d ) 12 0
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
(no load)
Maximum boom length
(ft.) at 0° boom angle 110 110
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103892
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
41.3 - 128 ft. 33-56 ft. 20 - 40 ft. 24,000 lbs 100% 360º
24 ft. 0 in.
Pounds
11
76 ft. (56 ft. LENGTH + 1 INSERT) 96 ft. (56 ft. LENGTH + 2 INSERTS
0° 20° 40° 0° 20° 40°
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
4,850 1. All capacities above the bold line are based on
50
(77.5) structural strength of boom extension and do not
4,850 3,520 exceed 85% of tipping loads, in accordance with
55
(76) (78)
4,850 3,520
SAE J-765.
60 2. The 33 ft. extension length may be used with single
(74.5) (77)
4,850 *5,290 3,520 or double part line lifting service. The 56 ft.
65
(73) (78) (75.5) extension length may be used for single line lifting
4,850 4,860 3,520 service only.
70
(71.5) (76.5) (74)
3. For main boom lengths less than 128 ft. with the
4,850 4,470 3,520 3,740
75 boom extension erected, the rated loads are
(70) (75) (72.5) (77)
4,730 4,110 4,050 3,520 3,420 determined by boom angle. Use only the column
80
(68.5) (73.5) (77) (71.5) (75.5) which corresponds to the boom extension length
4,310 3,790 3,500 3,300 3,100 *3,250
85
(67) (72) (75.5) (70) (74.5) (78)
and offset for which the machine is set up. For
3,940 3,500 3,260 2,970 2,820 2,720 boom angles not shown, use rating of the next
90 lower boom angle.
(65.5) (70) (73.5) (68.5) (73) (76)
95
3,610 3,240 3,030 2,660 2,560 2,490 4. WARNING: Operation of this machine with heavier
(63.5) (68.5) (72) (67) (71.5) (74.5) loads than the capacities listed is strictly prohibited.
3,310 3,000 2,830 2,390 2,320 2,270 Machine tipping with boom extension occurs
100
(62) (67) (70.5) (65.5) (70) (73)
3,040 2,770 2,630 2,140 2,100 2,070
rapidly and without advance warning.
105 5. Boom angle is the angle above or below horizontal
(60.5) (65) (68.5) (64) (68.5) (71.5)
2,790 2,570 2,450 1,920 1,900 1,890 of the longitudinal axis of the boom base section
110
(59) (63.5) (66.5) (62.5) (67) (70) after lifting rated load.
2,560 2,370 2,280 1,710 1,710 1,710
115 6. Capacities listed are with outriggers properly
(57) (61.5) (65) (61) (65.5) (68.5)
2,350 2,200 2,120 1,520 1,540 1,550 extended and vertical jacks set only.
120
(55.5) (60) (63) (59.5) (64) (66.5) 7. When lifting over the main boom nose with 33 ft. or
2,160 2,030 1,970 1,350 1,380 1,390 56 ft. extension erected, the outriggers must be
125
(53.5) (58) (61) (58) (62.5) (65)
fully extended or 50% extended (15 ft. 5 in. spread).
1,990 1,880 1,830 1,190 1,230 1,250
130
(52) (56.5) (59) (56.5) (60.5) (63.5)
1,820 1,730 1,700 1,040 1,080 1,110
135
(50) (54.5) (57) (55) (59) (61.5)
1,670 1,590 1,570
140
(48) (52.5) (55)
1,530 1,470 1,450
145
(46) (50.5) (52.5)
1,400 1,340 1,340
150
(43.5) (48) (50.5)
1,270 1,230 1,230
155
(41.5) (46) (48)
1,160 1,120 1,130
160
(39) (43.5) (45)
1,050 1,020
165
(36.5) (40.5)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Angle
20,750 15,150 10,500 6,700 5,100 3,900 2,900 2,000 1,300
0°
(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103749
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Pounds 13
0° 20° 40° 0° 20° 40°
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
*11,900
1. All capacities above the bold line are based on
35 structural strength of boom extension and do not
(78)
40
11,900 6,060 exceed 85% of tipping loads, in accordance with
(75.5) (77.5) SAE J-765.
11,900 *11,600 6,060 2. The 33 ft. extension length may be used with single
45
(73.5) (78) (76)
11,900 10,600 *9,700 6,060 or double part line lifting service. The 56 ft.
50 extension length may be used for single line lifting
(71.5) (75) (78) (74.5)
11,900 9,770 8,470 6,060 service only.
55 (70) (73) (75.5) (73) 3. For main boom lengths less than 128 ft. with the
11,000 9,020 7,920 6,060 *6,040
60 boom extension erected, the rated loads are
(68) (71) (73.5) (71) (78)
10,000 8,360 7,430 6,060 5,900 determined by boom angle. Use only the column
65
(66) (69.5) (72) (69.5) (75) which corresponds to the boom extension length
9,190 7,780 6,980 6,060 5,730 *4,930 and offset for which the machine is set up. For
70 (64) (67.5) (70) (68) (73.5) (78)
boom angles not shown, use rating of the next
8,460 7,260 6,580 6,060 5,330 4,640
75 lower boom angle.
(62) (65.5) (68) (66) (71.5) (76)
7,820 6,790 6,210 6,040 4,980 4,370 4. WARNING: Operation of this machine with heavier
80
(60) (63.5) (65.5) (64.5) (70) (74) loads than the capacities listed is strictly prohibited.
7,250 6,370 5,870 5,570 4,650 4,120 Machine tipping with boom extension occurs
85 (58) (61) (63.5) (63) (68) (72)
rapidly and without advance warning.
6,740 5,990 5,560 5,150 4,360 3,890
90 5. Boom angle is the angle above or below horizontal
(55.5) (59) (61) (61) (66.5) (70)
6,290 5,640 5,280 4,780 4,090 3,680 of the longitudinal axis of the boom base section
95
(53.5) (56.5) (59) (59.5) (64.5) (68.5) after lifting rated load.
5,750 5,320 5,020 4,440 3,840 3,480 6. Capacities listed are with outriggers properly
100 (51) (54.5) (56.5) (57.5) (62.5) (66.5)
extended and vertical jacks set only.
5,020 5,030 4,770 4,130 3,610 3,300
105 7. When lifting over the main boom nose with 33 ft. or
(48.5) (52) (54) (55.5) (60.5) (64.5)
4,360 4,760 4,550 3,850 3,400 3,130 56 ft. extension erected, the outriggers must be
110
(46) (49.5) (51) (53.5) (58.5) (62.5) fully extended or 50% extended (15 ft. 5 in. spread).
3,760 4,150 4,340 3,590 3,200 2,970
115 (43.5) (46.5) (48.5) (52) (56.5) (60)
3,220 3,560 3,840 3,360 3,020 2,820
120
(40.5) (44) (45) (49.5) (54.5) (58)
125 2,710 3,020 3,140 2,840 2,680
(37.5) (41) (47.5) (52.5) (55.5)
2,250 2,520 2,810 2,690 2,540
130 (34) (37.5) (45.5) (50) (53)
1,830 2,070 2,400 2,540 2,420
135
(30.5) (34) (43) (48) (50.5)
140 1,440 1,640 2,030 2,400 2,300
(26.5) (29.5) (40.5) (45) (47.5)
1,080 1,690 2,110
145 (21.5) (38) (42.5)
1,370 1,730
150
(35) (39.5)
155 1,070 1,380
(31.5) (36)
1,060
160
(32.5)
Minimum boom angle
(°) for indicated length
(no load)
Maximum boom length
(ft.) at 0° boom angle 110 100
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103771
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
14 Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Pounds 17
0° 20° 40° 0° 20° 40°
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
1. All capacities above the bold line are based on
4,850
50 structural strength of boom extension and do not
(77.5)
4,850 3,520 exceed 85% of tipping loads, in accordance with
55
(76) (78) SAE J-765.
4,850 3,520 2. The 56 ft. extension length may be used for single
60
(74.5) (77)
4,850 *5,290 3,520 line lifting service only.
65 3. For main boom lengths less than 128 ft. with the
(73) (78) (75.5)
70
4,850 4,860 3,520 boom extension erected, the rated loads are
(71.5) (76.5) (74) determined by boom angle. Use only the column
4,850 4,470 3,520 3,740 which corresponds to the boom extension length
75
(70) (75) (72.5) (77)
4,730 4,110 4,050 3,520 3,420 and offset for which the machine is set up. For
80 boom angles not shown, use rating of the next
(68.5) (73.5) (77) (71.5) (75.5)
4,310 3,790 3,500 3,300 3,100 *3,250 lower boom angle.
85
(67) (72) (75.5) (70) (74.5) (78) 4. WARNING: Operation of this machine with heavier
3,940 3,500 3,260 2,970 2,820 2,720
90 loads than the capacities listed is strictly prohibited.
(65.5) (70) (73.5) (68.5) (73) (76)
3,610 3,240 3,030 2,660 2,560 2,490 Machine tipping with boom extension occurs
95
(63.5) (68.5) (72) (67) (71.5) (74.5) rapidly and without advance warning.
3,310 3,000 2,830 2,390 2,320 2,270 5. Boom angle is the angle above or below horizontal
100
(62) (67) (70.5) (65.5) (70) (73)
of the longitudinal axis of the boom base section
3,040 2,770 2,630 2,140 2,100 2,070
105 after lifting rated load.
(60.5) (65) (68.5) (64) (68.5) (71.5)
2,790 2,570 2,450 1,920 1,900 1,890 6. Capacities listed are with outriggers properly
110
(59) (63.5) (66.5) (62.5) (67) (70) extended and vertical jacks set only.
2,560 2,370 2,280 1,710 1,710 1,710 7. When lifting over the main boom nose with 56 ft.
115
(57) (61.5) (65) (61) (65.5) (68.5)
extension erected and inserts, the outriggers must
2,350 2,200 2,120 1,520 1,540 1,550
120 be fully extended and vertical jacks set.
(55.5) (60) (63) (59.5) (64) (66.5)
2,160 2,030 1,970 1,350 1,380 1,390
125
(53.5) (58) (61) (58) (62.5) (65)
1,990 1,880 1,830 1,190 1,230 1,250
130
(52) (56.5) (59) (56.5) (60.5) (63.5)
1,820 1,730 1,700 1,040 1,080 1,110
135
(50) (54.5) (57) (55) (59) (61.5)
1,600 1,590 1,570
140
(48) (52.5) (55)
1,260 1,470 1,450
145
(46) (50.5) (52.5)
1,340 1,340
150
(48) (50.5)
1,100 1,230
155
(46) (48)
1,020
160
(45)
Minimum boom angle
(°) for indicated
length (no load)
Maximum boom
length (ft.) at 0° boom 70 60
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103786
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
++150,000
8
(73)
++150,000 86,000
9
(71.5) (75)
145,000 86,000 86,000
10
(70) (74) (77)
128,500 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
110,000 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
83,950 83,650 83,450 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
56,850 56,900 56,450 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
40,200 40,400 40,350 40,050 39,000 38,800 36,150 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
30,200 30,350 30,250 31,200 32,200 31,350 29,300 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
23,250 23,450 23,550 24,500 25,400 26,450 25,650 23,900 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
18,500 18,650 19,600 20,450 21,300 21,650 21,450 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
14,750 14,950 15,850 16,750 17,500 17,850 18,200 14,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
12,000 12,900 13,750 14,550 14,900 15,300 14,600
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
9,680 10,500 11,350 12,200 12,550 12,950 13,450
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
8,580 9,400 10,250 10,650 11,050 11,450
65
(29) (40) (47) (52) (56) (59)
6,950 7,750 8,620 9,050 9,460 9,810
70
(18.5) (34) (42.5) (48.5) (53) (56)
6,350 7,230 7,660 8,080 8,430
75
(27.5) (38) (45) (50) (53.5)
5,140 6,040 6,460 6,880 7,240
80
(17.5) (32.5) (41) (47) (50.5)
5,010 5,430 5,840 6,220
85
(26) (36.5) (43) (47.5)
4,110 4,520 4,930 5,320
90
(17) (31) (39.5) (44)
3,730 4,120 4,510
95
(25) (35) (40.5)
3,020 3,410 3,790
100
(16) (30) (36.5)
2,770 3,140
105
(24) (32)
2,190 2,560
110
(16) (27)
2,040
115
(21)
1,570
120
(10)
Minimum boom angle (deg.) for indicated length (no load) 9
Maximum boom length (ft.) at 0 deg. boom angle (no load) 120
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
Lifting Capacities at Zero Degree Boom Angle
Boom Main Boom Length in Feet
Angle 41.3 50 60 **70 80 90 100 110 120
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Pounds 19
0° 20° 40° 0° 20° 40°
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
1. All capacities above the bold line are based on
35 *11,900
(78) structural strength of boom extension and do not
11,900 6,060 exceed 85% of tipping loads, in accordance with
40 (75.5) (77.5) SAE J-765.
45 11,900 *11,600 6,060 2. The 33 ft. extension length may be used with single
(73.5) (78) (76)
11,900 10,600 *9,700 6,060 or double part line lifting service. The 56 ft.
50 (71.5) (75) (78) (74.5) extension length may be used for single line lifting
55 11,900 9,770 8,470 6,060 service only.
(70) (73) (75.5) (73) 3. For main boom lengths less than 128 ft. with the
60 11,000 9,020 7,920 6,060 *6,040 boom extension erected, the rated loads are
(68) (71) (73.5) (71) (78)
10,000 8,360 7,430 6,060 5,900 determined by boom angle. Use only the column
65
(66) (69.5) (72) (69.5) (75) which corresponds to the boom extension length
70 9,190 7,780 6,980 6,060 5,730 *4,930 and offset for which the machine is set up. For
(64) (67.5) (70) (68) (73.5) (78)
boom angles not shown, use rating of the next
75 8,460 7,260 6,580 6,060 5,330 4,640
(62) (65.5) (68) (66) (71.5) (76) lower boom angle.
7,820 6,790 6,210 6,040 4,980 4,370 4. WARNING: Operation of this machine with heavier
80 (60) (63.5) (65.5) (64.5) (70) (74) loads than the capacities listed is strictly prohibited.
7,070 6,370 5,870 5,570 4,650 4,120 Machine tipping with boom extension occurs
85 (58) (61) (63.5) (63) (68) (72)
rapidly and without advance warning.
90 6,120 5,990 5,560 5,150 4,360 3,890
(55.5) (59) (61) (61) (66.5) (70) 5. Boom angle is the angle above or below horizontal
5,280 5,640 5,280 4,780 4,090 3,680 of the longitudinal axis of the boom base section
95 (53.5) (56.5) (59) (59.5) (64.5) (68.5) after lifting rated load.
100 4,540 5,100 5,020 4,440 3,840 3,480 6. Capacities listed are with outriggers properly
(51) (54.5) (56.5) (57.5) (62.5) (66.5)
extended and vertical jacks set only.
105 3,870 4,360 4,750 4,130 3,610 3,300
(48.5) (52) (54) (55.5) (60.5) (64.5) 7. When lifting over the main boom nose with 33 ft. or
3,270 3,710 4,050 3,720 3,400 3,130 56 ft. extension erected, the outriggers must be
110 (46) (49.5) (51) (53.5) (58.5) (62.5) fully extended or 50% extended (15 ft. 5 in. spread).
115 2,720 3,110 3,420 3,200 3,200 2,970
(43.5) (46.5) (48.5) (52) (56.5) (60)
2,220 2,570 2,840 2,730 3,020 2,820
120 (40.5) (44) (45) (49.5) (54.5) (58)
125 1,760 2,070 2,290 2,840 2,680
(37.5) (41) (47.5) (52.5) (55.5)
130 1,340 1,610 1,900 2,510 2,540
(34) (37.5) (45.5) (50) (53)
135 1,190 1,530 2,070 2,410
(34) (43) (48) (50.5)
140 1,190 1,670 1,940
(40.5) (45) (47.5)
145 1,300
(42.5)
Minimum boom angle
(°) for indicated length
(no load)
Maximum boom length
(ft.) at 0° boom angle 100 90
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103773
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
8 ++150,000
(73)
9 ++150,000 86,000
(71.5) (75)
10 144,500 86,000 86,000
(70) (74) (77)
12 128,000 86,000 86,000 41,000
(67) (71.5) (75) (77)
15 109,500 86,000 86,000 41,000 39,000
(62) (67.5) (71.5) (74.5) (76.5)
20 82,700 82,400 82,200 41,000 39,000 38,800 *38,700 *31,950
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
25 54,550 54,600 54,150 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
30 38,450 38,650 38,600 38,300 39,000 38,800 36,150 31,950 25,750 14,600
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
35 28,800 28,950 28,850 29,800 30,750 31,350 29,300 25,750 14,600
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
40 22,100 22,300 22,400 23,300 24,200 25,250 25,500 23,900 14,600
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
45 17,500 17,650 18,600 19,450 20,300 20,600 20,900 14,600
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
50 13,850 14,050 14,950 15,850 16,600 16,950 17,300 14,600
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
55 11,200 12,100 12,950 13,750 14,100 14,500 14,600
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
60 8,960 9,810 10,650 11,450 11,850 12,250 12,700
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
65 7,930 8,740 9,610 10,000 10,400 10,800
(29) (40) (47) (52) (56) (59)
70 6,350 7,140 8,020 8,450 8,850 9,210
(18.5) (34) (42.5) (48.5) (53) (56)
75 5,790 6,670 7,100 7,520 7,870
(27.5) (38) (45) (50) (53.5)
80 4,620 5,520 5,950 6,360 6,720
(17.5) (32.5) (41) (47) (50.5)
85 4,520 4,940 5,350 5,730
(26) (36.5) (43) (47.5)
90 3,650 4,070 4,470 4,870
(17) (31) (39.5) (44)
95 3,300 3,700 4,080
(25) (35) (40.5)
100 2,610 3,000 3,380
(16) (30) (36.5)
105 2,390 2,760
(24) (32)
110 1,830 2,200
(16) (27)
115 1,700
(21)
120 1,240
(10)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Pounds 23
0° 20° 40° 0° 20° 40°
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
4,850 1. All capacities above the bold line are based on
50 structural strength of boom extension and do not
(77.5)
4,850 3,520 exceed 85% of tipping loads, in accordance with
55
(76) (78) SAE J-765.
4,850 3,520 2. The 56 ft. extension length may be used for single
60
(74.5) (77)
4,850 *5,290 3,520 line lifting service only.
65 3. For main boom lengths less than 128 ft. with the
(73) (78) (75.5)
4,850 4,860 3,520 boom extension erected, the rated loads are
70
(71.5) (76.5) (74) determined by boom angle. Use only the column
4,850 4,470 3,520 3,740
75 which corresponds to the boom extension length
(70) (75) (72.5) (77)
4,730 4,110 4,050 3,520 3,420 and offset for which the machine is set up. For
80 boom angles not shown, use rating of the next
(68.5) (73.5) (77) (71.5) (75.5)
4,310 3,790 3,500 3,300 3,100 *3,250 lower boom angle.
85
(67) (72) (75.5) (70) (74.5) (78) 4. WARNING: Operation of this machine with heavier
3,940 3,500 3,260 2,970 2,820 2,720
90 loads than the capacities listed is strictly prohibited.
(65.5) (70) (73.5) (68.5) (73) (76)
3,610 3,240 3,030 2,660 2,560 2,490 Machine tipping with boom extension occurs
95
(63.5) (68.5) (72) (67) (71.5) (74.5) rapidly and without advance warning.
3,310 3,000 2,830 2,390 2,320 2,270 5. Boom angle is the angle above or below horizontal
100
(62) (67) (70.5) (65.5) (70) (73) of the longitudinal axis of the boom base section
3,040 2,770 2,630 2,140 2,100 2,070
105 after lifting rated load.
(60.5) (65) (68.5) (64) (68.5) (71.5)
2,790 2,570 2,450 1,920 1,900 1,890 6. Capacities listed are with outriggers properly
110
(59) (63.5) (66.5) (62.5) (67) (70) extended and vertical jacks set only.
2,560 2,370 2,280 1,710 1,710 1,710 7. When lifting over the main boom nose with 56 ft.
115
(57) (61.5) (65) (61) (65.5) (68.5)
extension erected and inserts, the outriggers must
2,350 2,200 2,120 1,520 1,540 1,550
120 be fully extended and vertical jacks set.
(55.5) (60) (63) (59.5) (64) (66.5)
2,150 2,030 1,970 1,350 1,380 1,390
125
(53.5) (58) (61) (58) (62.5) (65)
1,750 1,880 1,830 1,190 1,230 1,250
130
(52) (56.5) (59) (56.5) (60.5) (63.5)
1,380 1,730 1,700 1,040 1,080 1,110
135
(50) (54.5) (57) (55) (59) (61.5)
1,040 1,590 1,570
140
(48) (52.5) (55)
1,240 1,450
145
(50.5) (52.5)
1,200
150
(50.5)
Minimum boom angle
(°) for indicated
length (no load)
Maximum boom
length (ft.) at 0° boom
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103788
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
24 Pounds
Main Boom Length in Feet
Feet
++150,000
8
(73)
++150,000 86,000
9
(71.5) (75)
143,500 86,000 86,000
10
(70) (74) (77)
127,500 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
109,000 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
81,450 80,150 79,250 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
52,250 52,300 51,850 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
36,700 36,900 36,850 36,600 37,650 38,700 36,150 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
27,400 27,500 27,450 28,400 29,350 30,850 29,300 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
20,900 21,100 21,200 22,100 23,000 24,050 24,300 23,900 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
16,450 16,600 17,600 18,400 19,300 19,600 19,900 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
12,950 13,150 14,050 14,950 15,700 16,050 16,400 14,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
10,400 11,300 12,150 12,950 13,300 13,700 14,300
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
8,240 9,100 9,930 10,750 11,150 11,500 12,000
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
7,270 8,090 8,960 9,360 9,740 10,150
65
(29) (40) (47) (52) (56) (59)
5,750 6,540 7,420 7,850 8,250 8,610
70
(18.5) (34) (42.5) (48.5) (53) (56)
5,230 6,120 6,550 6,960 7,310
75
(27.5) (38) (45) (50) (53.5)
4,100 5,000 5,430 5,840 6,210
80
(17.5) (32.5) (41) (47) (50.5)
4,040 4,460 4,870 5,250
85
(26) (36.5) (43) (47.5)
3,200 3,620 4,020 4,420
90
(17) (31) (39.5) (44)
2,870 3,270 3,660
95
(25) (35) (40.5)
2,210 2,600 2,980
100
(16) (30) (36.5)
2,000 2,380
105
(24) (32)
1,470 1,840
110
(16) (27)
1,350
115
(21)
0°
(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103753
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Pounds 25
0° 20° 40° 0° 20° 40°
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
1. All capacities above the bold line are based on
35 *11,900
(78) structural strength of boom extension and do not
11,900 6,060 exceed 85% of tipping loads, in accordance with
40 (75.5) (77.5) SAE J-765.
45 11,900 *11,600 6,060 2. The 33 ft. extension length may be used with single
(73.5) (78) (76)
11,900 10,600 *9,700 6,060
or double part line lifting service. The 56 ft.
50 (71.5) (75) (78) (74.5) extension length may be used for single line lifting
11,900 9,770 8,470 6,060 service only.
55 (70) (73) (75.5) (73) 3. For main boom lengths less than 128 ft. with the
60 11,000 9,020 7,920 6,060 *6,040 boom extension erected, the rated loads are
(68) (71) (73.5) (71) (78)
10,000 8,360 7,430 6,060 5,900 determined by boom angle. Use only the column
65
(66) (69.5) (72) (69.5) (75) which corresponds to the boom extension length
9,190 7,780 6,980 6,060 5,730 *4,930 and offset for which the machine is set up. For
70 (64) (67.5) (70) (68) (73.5) (78)
boom angles not shown, use rating of th next lower
75 8,280 7,260 6,580 6,060 5,330 4,640
(62) (65.5) (68) (66) (71.5) (76) boom angle.
7,120 6,790 6,210 6,040 4,980 4,370 4. WARNING: Operation of this machine with heavier
80 (60) (63.5) (65.5) (64.5) (70) (74) loads than the capacities listed is strictly prohibited.
6,100 6,370 5,870 5,570 4,650 4,120 Machine tipping with boom extension occurs
85 (58) (61) (63.5) (63) (68) (72)
rapidly and without advance warning.
90 5,210 5,920 5,560 5,150 4,360 3,890
(55.5) (59) (61) (61) (66.5) (70) 5. Boom angle is the angle above or below horizontal
4,430 5,050 5,280 4,780 4,090 3,680 of the longitudinal axis of the boom base section
95 (53.5) (56.5) (59) (59.5) (64.5) (68.5) after lifting rated load.
3,730 4,290 4,720 4,120 3,840 3,480 6. Capacities listed are with outriggers properly
100 (51) (54.5) (56.5) (57.5) (62.5) (66.5)
extended and vertical jacks set only.
105 3,100 3,600 3,980 3,530 3,610 3,300
(48.5) (52) (54) (55.5) (60.5) (64.5) 7. When lifting over the main boom nose with 33 ft. or
2,540 2,980 3,320 2,990 3,400 3,130 56 ft. extension erected, the outriggers must be
110
(46) (49.5) (51) (53.5) (58.5) (62.5) fully extended or 50% extended (15 ft. 5 in. spread).
115 2,030 2,420 2,720 2,510 3,200 2,970
(43.5) (46.5) (48.5) (52) (56.5) (60)
120 1,560 1,910 2,180 2,060 2,840 2,820
(40.5) (44) (45) (49.5) (54.5) (58)
125 1,130 1,440 1,660 2,350 2,680
(37.5) (41) (47.5) (52.5) (55.5)
130 1,010 1,290 1,900 2,310
(37.5) (45.5) (50) (53)
135 1,490 1,820
(48) (50.5)
140 1,110 1,380
(45) (47.5)
Minimum boom angle
(°) for indicated length
(no load)
Maximum boom length
(ft.) at 0° boom angle
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103775
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle. TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
8 ++150,000
(73)
++150,000 86,000
9 (71.5) (75)
10 142,500 86,000 86,000
(70) (74) (77)
12 126,500 86,000 86,000 41,000
(67) (71.5) (75) (77)
15 108,000 86,000 86,000 41,000 39,000
(62) (67.5) (71.5) (74.5) (76.5)
20 75,150 73,500 72,600 41,000 39,000 38,800 *38,700 *31,950
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
25 47,700 47,750 47,300 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
30 33,200 33,400 33,400 33,100 34,150 35,250 36,150 31,950 25,750 14,600
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
35 24,550 24,700 24,650 25,550 26,550 28,050 28,100 25,750 14,600
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
40 18,550 18,750 18,850 19,750 20,650 21,700 21,950 22,150 14,600
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
45 14,450 14,550 15,550 16,400 17,250 17,550 17,850 14,600
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
50 11,150 11,350 12,250 13,150 13,900 14,250 14,600 14,600
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
55 8,830 9,720 10,550 11,350 11,700 12,100 12,700
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
60 6,800 7,650 8,490 9,320 9,710 10,050 10,550
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
65 5,960 6,770 7,660 8,040 8,430 8,840
(29) (40) (47) (52) (56) (59)
70 4,540 5,340 6,220 6,650 7,050 7,400
(18.5) (34) (42.5) (48.5) (53) (56)
75 4,120 5,010 5,440 5,850 6,200
(27.5) (38) (45) (50) (53.5)
80 3,070 3,970 4,400 4,810 5,170
(17.5) (32.5) (41) (47) (50.5)
85 3,080 3,500 3,910 4,280
(26) (36.5) (43) (47.5)
90 2,300 2,710 3,110 3,510
(17) (31) (39.5) (44)
95 2,020 2,420 2,810
(25) (35) (40.5)
100 1,400 1,790 2,170
(16) (30) (36.5)
105 1,240 1,580
(24) (32)
110 1,050
(27)
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Pounds 29
0° 20° 40° 0° 20° 40°
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
1. All capacities above the bold line are based on
50 4,850
(77.5) structural strength of boom extension and do not
4,850 3,520 exceed 85% of tipping loads, in accordance with
55 (76) (78) SAE J-765.
60 4,850 3,520 2. The 56 ft. extension length may be used for single
(74.5) (77)
4,850 *5,290 3,520
line lifting service only.
65 (73) (78) (75.5) 3. For main boom lengths less than 128 ft. with the
70 4,850 4,860 3,520 boom extension erected, the rated loads are
(71.5) (76.5) (74) determined by boom angle. Use only the column
4,850 4,470 3,520 3,740
75 which corresponds to the boom extension length
(70) (75) (72.5) (77)
4,730 4,110 4,050 3,520 3,420 and offset for which the machine is set up. For
80 (68.5) (73.5) (77) (71.5) (75.5) boom angles not shown, use rating of the next
85 4,310 3,790 3,500 3,300 3,100 *3,250 lower boom angle.
(67) (72) (75.5) (70) (74.5) (78)
4. WARNING: Operation of this machine with heavier
90 3,940 3,500 3,260 2,970 2,820 2,720
(65.5) (70) (73.5) (68.5) (73) (76) loads than the capacities listed is strictly prohibited.
3,610 3,240 3,030 2,660 2,560 2,490 Machine tipping with boom extension occurs
95
(63.5) (68.5) (72) (67) (71.5) (74.5) rapidly and without advance warning.
3,310 3,000 2,830 2,390 2,320 2,270 5. Boom angle is the angle above or below horizontal
100 (62) (67) (70.5) (65.5) (70) (73)
of the longitudinal axis of the boom base section
105 3,040 2,770 2,630 2,140 2,100 2,070
(60.5) (65) (68.5) (64) (68.5) (71.5) after lifting rated load.
110 2,580 2,570 2,450 1,920 1,900 1,890 6. Capacities listed are with outriggers properly
(59) (63.5) (66.5) (62.5) (67) (70) extended and vertical jacks set only.
115 2,070 2,370 2,280 1,710 1,710 1,710 7. When lifting over the main boom nose with 56 ft.
(57) (61.5) (65) (61) (65.5) (68.5)
1,600 2,200 2,120 1,320 1,540 1,550 extension erected and inserts, the outriggers must
120 (55.5) (60) (63) (59.5) (64) (66.5) be fully extended and vertical jacks set.
125 1,180 1,970 1,970 1,380 1,390
(53.5) (58) (61) (62.5) (65)
130 1,510 1,830 1,230 1,250
(56.5) (59) (60.5) (63.5)
135 1,090 1,520 1,110
(54.5) (57) (61.5)
140 1,130
(55)
Minimum boom angle
(°) for indicated
length (no load)
Maximum boom
length (ft.) at 0° boom
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103790
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
30 Pounds
Main Boom Length in Feet
Feet
++150,000
8
(73)
++150,000 86,000
9
(71.5) (75)
141,500 86,000 86,000
10
(70) (74) (77)
125,500 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
105,500 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
68,500 66,950 66,050 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
43,100 43,150 42,700 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
29,700 29,950 29,900 29,600 30,650 31,750 34,200 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
21,750 21,850 21,800 22,750 23,700 25,200 25,550 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
16,150 16,350 16,450 17,400 18,250 19,350 19,800 20,250 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
12,400 12,550 13,500 14,350 15,200 15,650 16,150 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
9,390 9,570 10,450 11,350 12,100 12,600 13,100 13,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
7,230 8,120 8,990 9,770 10,200 10,700 11,100
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
5,360 6,210 7,050 7,880 8,330 8,790 9,130
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
4,640 5,460 6,340 6,780 7,210 7,520
65
(29) (40) (47) (52) (56) (59)
3,330 4,130 5,020 5,480 5,900 6,200
70
(18.5) (34) (42.5) (48.5) (53) (56)
3,000 3,900 4,340 4,760 5,080
75
(27.5) (38) (45) (50) (53.5)
2,030 2,940 3,370 3,780 4,110
80
(17.5) (32.5) (41) (47) (50.5)
2,110 2,520 2,920 3,260
85
(26) (36.5) (43) (47.5)
1,390 1,780 2,170 2,510
90
(17) (31) (39.5) (44)
1,130 1,500 1,820
95
(25) (35) (40.5)
1,220
100
(36.5)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
Pounds 31
0° 20° 40° 0° 20° 40°
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET NOTES:
*11,900 1. All capacities above the bold line are based on
35 structural strength of boom extension and do not
(78)
11,900 6,060 exceed 85% of tipping loads, in accordance with
40 (75.5) (77.5) SAE J-765.
45 11,900 *11,600 6,060
(73.5) (78) (76) 2. The 33 ft. extension length may be used with single
11,900 10,600 *9,700 6,060 or double part line lifting service. The 56 ft.
50
(71.5) (75) (78) (74.5) extension length may be used for single line lifting
11,900 9,770 8,470 6,060 service only.
55 (70) (73) (75.5) (73)
3. For main boom lengths less than 128 ft. with the
10,050 9,020 7,920 6,060 *6,040
60 boom extension erected, the rated loads are
(68) (71) (73.5) (71) (78)
8,410 8,360 7,430 6,060 5,900 determined by boom angle. Use only the column
65 (66) (69.5) (72) (69.5) (75) which corresponds to the boom extension length
70 7,010 7,640 6,980 6,060 5,730 *4,930 and offset for which the machine is set up. For
(64) (67.5) (70) (68) (73.5) (78)
boom angles not shown, use rating of th next lower
5,840 6,460 6,580 6,030 5,330 4,640
75 boom angle.
(62) (65.5) (68) (66) (71.5) (76)
4,840 5,440 6,070 5,110 4,980 4,370 4. WARNING: Operation of this machine with heavier
80 (60) (63.5) (65.5) (64.5) (70) (74) loads than the capacities listed is strictly prohibited.
85 3,980 4,560 5,120 4,310 4,650 4,120 Machine tipping with boom extension occurs
(58) (61) (63.5) (63) (68) (72)
rapidly and without advance warning.
3,230 3,780 4,290 3,610 4,360 3,890
90 5. Boom angle is the angle above or below horizontal
(55.5) (59) (61) (61) (66.5) (70)
2,570 3,100 3,560 3,000 4,000 3,680 of the longitudinal axis of the boom base section
95
(53.5) (56.5) (59) (59.5) (64.5) (68.5) after lifting rated load.
1,990 2,490 2,910 2,440 3,380 3,480 6. Capacities listed are with outriggers properly
100
(51) (54.5) (56.5) (57.5) (62.5) (66.5)
1,460 1,940 2,320 1,950 2,810 3,300
extended and vertical jacks set only.
105 (48.5) (52) (54) (55.5) (60.5) (64.5) 7. When lifting over the main boom nose with 33 ft. or
110 1,440 1,740 1,510 2,310 2,920 56 ft. extension erected, the outriggers must be
(49.5) (51) (53.5) (58.5) (62.5) fully extended or 50% extended (15 ft. 5 in. spread).
1,220 1,100 1,850 2,380
115
(48.5) (52) (56.5) (60)
1,430 1,900
120 (54.5) (58)
125 1,040 1,460
(52.5) (55.5)
1,020
130
(53)
Minimum boom angle
(°) for indicated length
(no load)
Maximum boom length
(ft.) at 0° boom angle
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103777
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.
TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load charts
32 Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
load handling
Weight Reductions for Load Handling Devices Line Pulls and Reeving Information
33 ft.-56 ft. Folding Boom Extension Permissible Nominal
*33 ft. Extension (Erected) 5590 lb. Hoists Cable Specs. Line Pulls Cable Length
3/4" (19 mm) 6x37 Class,
*56 ft. Extension (Erected)
*76 ft. (1 insert Erected)
13060 lb.
13670 lb.
Main EIPS, IWRC Special Flexible
Min. Breaking Strength 58,800 lb.
16,800 lb. 600 ft.
33
*96 ft. (2 inserts Erected) 20680 lb.
*Reduction of main boom capacities 3/4" (19 mm) Flex-X 35
(no deduct required for stowed boom extension) Main & Aux. Rotation Resistant (Non-rotating) 17,160 lb. 607 ft.
Min. Breaking Strength 85,800 lb.
When lifting over swingaway and/or jib combinations, deduct total weight of all
load handling devices reeved over main boom nose directly from swingaway or
jib capacity. The approximate weight of 3/4" wire rope is 1.5 lb./ft.
TMS800E
Bold lines determine the limiting position of any load for operation within working areas indicated.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart,
operating instructions and other instructional plates must be read and understood prior to operating the crane.
Notes
34
TMS800E
Notes
35
TMS800E
Manitowoc Crane Group - Americas
Manitowoc, Wisconsin Facility
Tel: [Int + 001] 920 684 6621
Fax: [Int + 001] 920 683 6277
Shady Grove, Pennsylvania Facility
Tel: [Int + 001] 717 597 8121
Fax: [Int + 001] 717 597 4062
Manitowoc Crane Group - EMEA
Europe Middle East & Africa
Tel: [Int + 33] (0) 191 565 6281
Fax: [Int + 33] (0) 4 72 18 20 20
Manitowoc Crane Group - UK
Europe Middle East & Africa
Tel: [Int + 44] (0) 191 565 6281
Fax: [Int + 44] (0) 191 564 0442
Manitowoc Crane Group - Germany
(Sales, Parts & Service)
Tel: [Int + 49](0) 2173 8909 0
Fax: [Int + 49] (0) 2173 8909-30
Manitowoc Crane Group - France
France & Africa (Sales, Parts & Service)
Tel: [Int + 33] (0) 1 303 13150
Fax: [Int + 33] (0) 1 303 86085
Manitowoc Crane Group - Netherlands
(Sales, Parts & Service)
Tel: [Int + 31] (0) 76 578 39 99
Fax: [Int + 31] (0) 76 578 39 78
Manitowoc Crane Group - Italy
Italy & Southern Europe (Sales, Parts & Service)
Tel: [Int + 39] (0) 331 49 33 11
Fax: [Int + 39] (0) 331 49 33 30
Manitowoc Crane Group - Portugal
Portugal & Spain (Sales, Parts & Service)
Tel: [Int + 351] (0) 22 968 08 89
Fax: [Int + 351] (0) 22 968 08 97
Manitowoc Crane Group - Singapore
Asia/Pacific excl China (Sales, Parts & Service)
Tel: [Int + 65] 6861 1733
Fax: [Int + 65] 6862 4040 / 4142
Manitowoc Crane Group - Shanghai
China (Sales, Parts & Service)
Tel: [Int + 86] (0) 21 64955555
Fax: [Int + 86] (0) 2164852038
Manitowoc Crane Group - Beijing
China (Sales, Parts & Service)
Tel: [Int + 86] (0) 10 646 71690
Fax: [Int + 86] (0) 10 646 71691
Manitowoc Crane Group - Middle East
(Sales)
Tel: [Int + 971] (0) 4 348 4478
Fax: [Int + 971] (0) 4 348 4478
(Parts & Service)
Tel: [Int + 973] (0) 9 660 899
Fax: [Int + 973] (0) 2 707 740
Distributed By:
Constant improvement and engineering progress make it necessary that we reserve the right to make
speicfication, equipment, and price changes without notice. Illustrations shown may include optional equipment
and accessories, and may not include all standard equipment.
www.manitowoccranegroup.com