Professional Documents
Culture Documents
How To Flash Android OS Using Manufacturing Flash Tool
How To Flash Android OS Using Manufacturing Flash Tool
Prepared Tools:
Computer with Windows 7 or Windows 10
Tablet and Data Cable
Manufacturing Flash Tool
Android Firmware
You should install usb dirver (two files) and Manufacturing Flash Tool
(All files need to Right-click to run as the Administrator)
When you finished installation of the Manufacturing Flash Tool, pls set Manufacturing Flash
Tool following this method:
File – Setting - General Properties
3. Choose the Android Firmware(you download), start to flash Android OS
(1) To choose the file “flash” or “flash_no_erase_all” (flash file is from the Android
Firmware file)
To choose “flash” will erase the Windows OS; To choose “ flash_no_erase_all” will keep the
Windows OS;
(2) Connect tablet to computer when tablet show “Entering DnX mode. Waiting for
fastboot command…” then start to flash Android;
After choosing the file “flash” or “flash_no_erase_all”, long Press for Volume + button
then press for power button, and tablet will show “Entering DnX mode. Waiting for
fastboot command…” in the top left corner. Then connect tablet to computer using data
cable. And tablet will start to flash Android.
PS: If tablet get stuck at 5%,7% or other conditions, pls copy “CUSTOM_CONFIG” into the
installation root of the Manufacturing Flash Tool.
(3) After the flashing is successful, press the volume button to choose “REBOOT” and then
press the power button to confirm. Then the tablet will reboot automatically into the
system.
Finished!