TECHNICAL
ALERT Jere
Saudi Aramco
CONSULTING SERVICES DEPARTMENT
SUBJECT: CHANGE IN WELDING ALERT NO: DATE:
003/04 5/24/2004
SUMMARY
FILLER MATERIAL
DESIGNATION FOR 5 AND 9
CHROME
The AWS and ASME have changed the welding filler material designation for 5% and 9% chrome
consumables. This applies to the specifications related to bare wire and covered electrodes. They have
moved these consumables from the specifications of Stainless Steels and placed them in the
specifications of Low-Alloy Steels. They have also changed the classification identification. The
purpose of this Technical Alert is to prevent the use of incorrect material. The following charts provide
across reference for the old and new designations.
BARE ELECTRODES AND RODS
BASE MATERIAL OLD SPECIFICATION — | NEW SPECIFICATION
NOMINAL AND CLASSIFICATION | AND CLASSIFICATION
COMPOSITION
SFA 5.9 specification SEA 5.28 specification
3Cr ERSO2 ERS0S-B6,
9Cr ERSOS ERSOS-B3
COVERED ELECTRODES FOR SHIELDED METAL ARC WELDING
BASE MATERIAL OLD SPECT NEW SPECIFICATION
NOMINAL AND CLASSIFICATION | AND CLASSIFICATION
COMPOSITION
SFA 5.5 specification
5Cr E8018-B6
9Cr ES0IS-BS
RECOMMENDATII
‘The properties of the both consumables meet those of the intended base material. The consumables may
be used interchangeably for each Nominal Composition. All new welding procedures must have the
ew designation histed.
If you have any questions or inquiries regarding this alert please contact D. Niemeyer (873-6700)
‘H.J. AlF-Zahrani, Manager
Consulting Services Department
hen bi
DCN/ALVAM